Screen missing on e4620 to enter the SSID of the wireless network

Similar Questions

• Printer all in one HP3520 - how to select the wireless network and enter the WEP key?

  According to print my wireless network is detected.

  How to connect the! @# % printer $ fo the wireless network and enter the WEP key?

  Instructions on the HP site tell me to selet NETWORK on the printer control panel.  Well, there's a way to select the NETWORK from the control panel.  It is not an option for him.

  I downnloaded and installed the latest drivers.

  I have restored the default settings.

  How to select the wireless network and enter the WEP key?

  All of HP's instructions seem to be for a newer printer with a touchscreen.

  I want that the printer is connected to my main computer via the USB port.  I want to be able to print wireless phones and tablets.

  My 3520 is not a 'touch Screen' and it has wifi.

  However, the following work:

  Try to open the HP Deskjet 3520 icon, open the utilities tab, click on convert USB wireless, by following the steps on the screen.

  This leads me to believe that ONLY the wireless doesn't work.  I know now that the part of the sentence "Convert USB to wireless connection" is supposed to mean "works like USB and wireless.

  Thank you for your help

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• The "Wireless networks" tab is missing

  I'm trying to troublshoot a wireless connection:

  Windows Wireless Auto Configuration is enabled and running, but the "Wireless networks" tab is missing from the wireless network connection properties window.

  Any ideas on how to restore this tab?

  The radio works and shows a TX/RX connection but the router will not assign an IP address.

  Windows XP SP3 laptop ThinkPad T30.

  I had the same problem - reinstalled windows, updated with service pack 3 and wireless tab was not visible. I couldn't view wireless networks. WZC has been launched and running. I tried several suggestions on different threads, but none seemed to help.

  Finally, this helped:

  Click on "View available networks" and then 'change advanced settings '.

  Under "Wireless network connection properties", click the "Advanced" tab

  At the bottom of the Advanced window, I had a link to the installation network connections (I am not able to find it now - so don't know the exact name) and click on it. He took me through a series of steps where I clicked next/ok. Finally, after finishing, the wireless networks tab is appeared! I don't know why!

• Missing, probably deleted, the wireless network icon

  Okay, I know I'm stupid. But I think a long time I could have deleted the wireless network icon. I have a desktop computer and I am connected to my modem with my ethernet cable. However, I just got a Roku Netflix player and need to have a wireless network. My modem has a wireless function, but I need this thing to wireless network icon who put in place.

  I checked the forums and they tell everyone to go to Device Manager and uninstall something, then restart your computer.  When I go there my options for uninstall are Intel Pro/100 VE Network Connection and network controller that has a yellow circle with and exclamation mark inside. I'm pretty sure is my wireless card, I had installed but no longer uses.

  So, how can I uninstall? Or is this not what I need to do?

  Please help me! Thank you!!!

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 'Unable to Find' OJ Pro 8600 Premium on the wireless network

  Network: Router NetGear 3400, WEP 64-bit + computer Dell laptop + Officejet Pro 8600 Premium N911n, HPC782FE.  Vista 32 - bit OS.  New printer installation, wireless connection to the wireless internet router.  Test results of the wireless network said successful wireless wireless wireless printer installation works, connected, SSID found, the printer settings compatible with the configuration of the wireless router.  Network status says HP Network Configuration page is ready, Active connection Type is wireless, 802.11 Wireless status is connected.

  I can send HPeprint to the computer through the router, and it comes back through the router to the printer when it prints.  But I can't print directly from the computer to the printer, even if the two seem to be connected to the network via the same router.  I'm puzzled.

  When I press the icon on the screen of the printer wireless, it says connected, IP: 192.168.1.105 (I put manually after having read several problem Q & as), with the correct network name and MAC, with a strong signal.  When I click on "I can see that the status is logged on and the intensity of the signal" and then enter the IP 192.168.1.105 and then click Next, the search for a printer "Can't find printer" product and I'm back where I started.  When I jump to the next page and finally get to the HP Print and Scan of doctor, he is unable to identify or fix the problem.

  Hi Allen73,

  There seems to be some problems with the configuration of the network configuration. Please call our technical support to the 800-474-6836 if you're ok with it, they can log on to your computer and take a look to see what settings need to be corrected. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Strangest thing: iPhones can't see the wireless network. Why not?

  Suddenly, an iPhone 5 and an iPhone 6 were not connected to the home network. I thought that the wireless router was to have a hiccup. Reset it and still no. Control a connected computer and internet. Thought that it was a wireless problem, but check the settings (I don't mess with) and they are fine. BUT, I realized my iPad is always connected to the network. IPhones don't even see the wireless network. SSID always broadcast on. I tried to enter the SSID and password manually, but iPhones say that the network does not exist. It's the strangest thing. What would make the invisible network for phones all of a sudden? Both phones are differnet OS running. One is the latest version, probably the previous version. It's a FiOS Actiontec router/router wireless. Everyone has heard of such a thing? I do not understand how it is possible...

  Try this on an iPhone. No matter which even with other iOS.

  Tap settings > general > reset > reset network settings

  You will need to enter the password for Wi - Fi.

• HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

  Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

  Hello @fairgame,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!

  First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:

  HP PC - troubleshooting Internet and wireless network

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• How to get two laptops to access the wireless network.

  My chip wireless on a Dell Inspiron 1520 laptop (intel pro wireless 3954bg) can find the wireless network if I use Intel Pro software, but Windows cannot find the wireless network. My real growth problem trying to connect a second computer; an IBM T42 think Pad computer to the wireless network, but I get a message that the network is secure, and the second computer keeps trying to acquire an address, but will not acquire an address. He just continues to try to acquire again and again, he can never acquire it. This second computer using Windows to configure the Wi - Fi connection and was working fine until I tried to connect the Dell laptop upward. Then, the IBM laptop cannot acquire an address. I go around and try to understand it. Someone at - it information to solve this problem? Both computers are runing Windows XP Pro SP3. My wireless router is a Belkin54g (F5D7230-4V8000)

  Thanks for any help,

  Btk (billy the kid)

  You can control a with either wireless network adapter software integrated in Windows XP (or WZC Wireless Zero Configuration) or with software provided by the manufacturer of the card (for example, Intel PROSet/Wireless), but not both at the same time.

  Most, but not all, software configuration wireless no Windows is smart enough to disable WZC automatically.

  There are a few sites that offer "safety tips" for wireless networks which includes 'hide' your wireless network by disabling the SSID broadcast.  This is not a good idea and does not, in fact, your wireless security.  See http://blogs.technet.com/b/steriley/archive/2007/10/16/myth-vs-reality-wireless-ssids.aspx if you have disabled broadcast SSID of your router, automatic configuration won't be able to find it.

  I get a message that the network is secure, and the second computer guard trying to acquire an address, but will not acquire an address

  If you have enabled encryption wireless router (a very good idea), you will need to enter the correct password in order to connect a find an IP address. What type of wireless encryption configured on the router?

  This second computer using Windows to configure the Wi - Fi connection and was working fine until I tried to connect the Dell laptop upward. Then the IBM laptop cannot acquire an address.

  You have changed something else.  The idea of a wireless network is to allow multiple computers to connect; connection to a computer shouldn't affect how another computer connects.

  The easiest way is to configure your router to connect a computer using an Ethernet cable (if you connect wireless, you will be disconnected when you make a change to the configuration of the router wireless).  For the Belkin router User Guide is here--> http://cache-www.belkin.com/support/dl/p74559-f_f5d7230-4v8xxx_manual.pdf

  Open a web browser (Internet Explorer, Firefox, etc.) and type 192.168.2.1 in the address box.  You should get to the home page of the router. Click on the "Login" link at the top.  The default password for the router is blank (no password) unless you changed it.

  Click on the link "Channel and SSID" under the heading "wireless" on the left side of the page.

  • Make sure that there is to check the "Broadcast SSID"
  • "Wireless mode" should be "g only" or "fashion g and b" (the latter is necessary only if you have a very old b wireless adapter in one of your computers)
  • I suggest you let off QoS (but click on "more info" or see what says the User Guide)
  • The wireless channel should be 1, 6 or 11.  If you have no difficulties, let him you will find
  • "Protected mode" should be off (but click on "more info" or see what says the User Guide)
  • If you make changes, click on "Apply Changes".

  Click on the 'Security' line under the heading "wireless".  You should be able to see both what type (if any) encryption is configured (64-bit WEP, 128-bit WEP, WPA, or WPA2) and the password (if any).  Unless your computer maps are old, you should use WPA2.  If the adapter in one or more of your computers is too old to be capable of WPA2, use WPA.  Regardless of the bit, WEP length, is easily broken.

• My PC is connected to the wireless network, but it is impossible to open any internet page. I went through the diagnosis of Internet Explorer, see below.

  Diagnosis of last run time: 28/01/12 10:16:32 Gateway diagnosis

  Entry door

  Info the following proxy configuration is used by IE: automatically detect settings: enabled Automatic Configuration Script: Proxy Server: Proxy bypass list:

  info could not get the proxy settings via the Proxy Automatic Configuration mechanism

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  repair automatic action: reset the network connection

  action to disable the network card

  activation of the card network action

  successfully activated information network adapter

  Info this computer has the following (s) default gateway: 0.0.0.0

  warn that there is no default gateway entry

  user redirection of information in support of the appeal

  IP layer diagnostic

  Corrupted IP routing table

  prevent the default route is missing or not valid

  Invalid entries in the ARP cache

  action cache ARP has been emptied

  Diagnosis of IP Configuration

  Invalid IP address

  detected info valid IP address: 192.168.0.1

  Wireless diagnosis

  Wireless - Service disabled

  Wireless - user SSID

  required user input action: specify the name of the network or the SSID

  Wireless - first installation

  Info the name of the wireless network (SSID) to which the user wants to connect is IrinaLaptop-router.

  Wireless - Radio

  detected info valid IP address: 192.168.0.1

  Wireless - off limits

  Wireless - hardware problem

  Wireless - Novice user

  Wireless - network Ad - hoc

  Wireless - less preferred

  Wireless - 802. 1 active x

  Wireless - Configuration mismatch

  Wireless - low SNR

  WinSock diagnostic

  WinSock status

  info all base service provider entries are present in the Winsock Catalog.

  channels of information the Winsock Service provider are valid.

  Info entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.

  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.

  Info entry RSVP UDP Service Provider provider passed the loopback communication test.

  Info entry RSVP TCP Service Provider provider passed the loopback communication test.

  Info connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter

  Network location detection

  Info to help home Internet connection

  Identification of network adapter

  Info network connection: name = connection to the LAN, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN

  Info network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless

  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394

  Info network connection: name = connection high speed, device = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info network connection: name = blank, peripheral = Miniport WAN (PPPOE), MediaType = PPPOE, type = NONE

  Info both Ethernet connections and wireless available, ask the user for selection

  required user input action: select network connection

  Info Wireless connection selected

  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn HTTP: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn HTTP: error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  WARN HTTPS: error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  WARN FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  WARN FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  error could not make an HTTP connection.

  error could not make an HTTPS connection.

  error could not make an FTP connection.

  I did not want to do this (restore point). However, I found a solution. It comes: http://forums.techguy.org/networking/1029348-network-connection-status-media-disconnected.html

  Where there are two crucial steps (do not know if the two were needed) RUN command (1) netsh int ip reset reset.log and (2) netsh winsock reset catalog
  
  
  After a restart, hey presto my wireless connection was repaired. This seems useful, but not essential (shows wireless performance but not the solution): http://wpc.475a.edgecastcdn.net/0047...etup.1.2.0.exe which is run Xirrus Wi-Fi Inspector 
  Thanks for your time!
  Good bye

• OfficeJet 6700 cannot find the printer on the wireless network

  Printer is connected to my wireless network.

  Print diagnostic shows PASS for everything and I have ip (DHCP 192.168.2.19)

  The printer is able to connect to the internet to download updates and pull content for apps (colouring etc...)

  I disabled my firewall of windows to resolve the problems, but the HP software was listed as exceptions anyway.

  Using the printer on my computer connection wizard I entered both the IP address and the host name but it is "impossible to find the printer.

  My router is a netgear WNDR3700.

  The ssid that I am connected is good.  I have a network of both comments, but it does not broadcast its ssid and I am not connected to it.

  I am getting very frustrated.  I'm tech-saavy and it should be much easier than this.

  I wonder if anyone else encountered this problem and can anyone offer suggestions?

  Thanks in advance...

  Hi mbelsey,

  By following the steps below resets the defaults on the printer. Reconnect the printer to the wireless network using the address assigned to the router DHCP. Once you have connected it to try to access the EWS and Ping the printer. Let me know what you find?

  First step: restore the default settings of network on your product

   

• WRT110-cant connect 2 computers to the wireless network at the same time

  I recently got this modem-

  It works very well with a computer, but if you are trying to connect to the network wirelessly with a second computer the connection is lost for both computers.

  A computer is a macbook pro installed osx 10.5.7 is either a computer dell laptop on vista

  First of all, you should get your router updated firmware...

  Download 2.77 MB firmware...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Flea market Vista laptop connects to the wireless network

  Hello

  I just got a computer mobile opportunity and I can't connect to our net at all. We have another laptop and a PC that both executed 7 that connect to it no problem at all. It is very strange that the laptop works perfectly, displays the connection, but point blank refuses to connect! I wonder if it is because it is not password protected? (I know, I know, but the PC does connect to him otherwise, that's weird). Any help is most appreciated!

  Hello

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul