Screen on Satellite C series is black with white writing

Hello

I need help, I've only had the phone for a few weeks so still to get used to it. (first computer).
It was working fine but now I have a black screen and all the writing is white and yellow.

Either I or my children have touched something we shouldn't have, it still works very well that the screen is annoying
and not all icons appear.

Also need help with a printer to use with this laptop, which is best to use.

Thanks for any help you can give me Jo.

Advertisement

> It was working fine but now I have a black screen and all the writing is white and yellow.

Please don t be angry with me, but your description isn't very useful.
First you don t say anything on your laptop model and the system you are using.

Secondly you said something about white and yellow writing on the black screen, where did you see that?
It is not by using special software such as Microsoft Office Word?

Please share more details with us!

Tags: Toshiba

Similar Questions

  • iPhone 6 my screen is all black with white lightning

    The screen is all black with white flashes when I turn it on. Is it a broken screen / digitizer or would it be a hardware problem? This also happened to me a months I did a factory reset. The screen flickered a few minutes after, but was wrong after that until now. Tried to do the same thing again with no luck.

    I suspect a hardware problem. But try:

    -iOS: do not respond or does not light

    https://support.Apple.com/en-us/HT201412

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    How to make a genius bar appointment? Apple support communities

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

  • Satellite L650 - 12 p - black and white colors on webcam

    Hello people I have a quick question on my laptop which is a Satellite L650 - 12 p.

    When I bought it, I'm sure that the webcam was color, but now it turned black and white. I tried different settings but cannot retrieve the color. Why it happened and what can I do?

    Someone please help.

    Hello

    The webcam shows usually more colors like black and white only.

    I think that it s just something wrong with the parameters of the webcam. You should check out this article from Toshiba on webcam different parameters:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=59

  • Satellite A100 - 294 PSAA8E: black and white TV without sound picture

    Dear all,
    When I select the TV mode, my TV shows black and white color without noise.
    WHY?

    I have:
    Satellite A100-294
    Part number: PSAA8E-02T014GR

    I check the cable to use it in my CAM.

    Hello

    I assume that you have chosen the wrong settings of PAL/NTSC.

    Please check if you are using the right settings that correspond with your country where you live.

  • Can not see the videos full screen on satellite U-series

    Hello.
    It's ok when I watch TV on my laptop. But when I want to watch it on full screan so there is no problem.
    Because I see nothing just black screen. But I can hear the sound.
    I have my laptop for 3 months and everything was ok. This problem started 2 days ago.
    Could you help me please?
    Thank you

    As far as I know laptop Satellite u have no TV tuner. So I would like to know how you watch television. If you use additional software to watch TV I recommend you contact their support. The fact is that Toshiba does not support the third party software, and the third part of external devices.

  • SCREEN BLACK WITH WHITE AFTER START POINTER

    I went on vacation and turned off my computer.  When I got home, I stupidly plugged in my blackberry storm, while the system was starting the system.  Now all I get is the black screen with the white pointer stupid.  I tried the solution of Task Manager and a few others who were listed in the similar questions to no prevail.  At one point I did a boot repair tool and he returned with it could not repair the iso standards, ico or something like that.  I did a system restore to an earlier date to before I left and that did not help.  Please help me.  Thank you.

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (a line type or copy and paste one line at a time and hit enter - enter a bracket)
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite Pro M40 sometimes starts with white screen

    Hello!

    I'm pulling out my hair with this problem.

    For no definable reason that according to me, my laptop will start with a blank screen.
    Not all the time, but, seemlingly, whenever it feels like I need extra help stress on my plate.
    For the most part, with perseverance (starting with or without battery, with or without the adapter, with or without pci with or without mouse usb network card and any combination of these elements), it ends by lights correctly, but sometimes Nothing that I won't get it to start and show me a screen.

    My M40 is 4 months old.
    Since it's purchase sent to Toshiba for repair twice for this problem, when I have exhausted myself trying to coax it into life. Whenever he was sent by saying either the problem has been fixed, or that he had no problem found/all systems ok / "it works very well for us, after testing all week."

    This week [edit: it was Wednesday], I sent it to me, and Yes, I checked the trunk upwards and gave a sigh of relief that there is an image on the screen.
    I wrote a letter to this topic a day or two later (that day he first gave me a screen white, but on closing down and restart, it was fine).
    Today, however, not a week later, I have a white screen again.

    I am reluctant to send for repair again, due to the stress involved and the time it takes and the technicians speaking it works for them.

    If anyone can help, or was faced with a similar problem, please respond.

    Oh, and the solution does not lie with the keys FN + F5, because I tried several times... unless there is a way to 'special' to build on them, I'm not in the running for!

    [Edit]: several hours later, as a demonstration of her bored this problem is, my screen is once more working.

    I went on once again, at the time and no joy. Then, after switching OFF, count to ten and the restart, eureka.

    I'll update with news as it happens. If there are all the necessary specific details about "switching on the environment", just let me know.

    Post edited by: jazziefox

    Hello

    Thank you for your update.
    It's a very strange question, and it would be very helpful if you can put yourself more observational.

  • Screen blackout Satellite A series

    A few weeks ago, I very kindly filled a questionnaire online for Toshiba. The theme was: "it is now more than two years and it still works. A week later a big boost two line appeared in the middle of the screen! My last laptop of a different manufacturer lasted me five years and my beautiful has now used for two or more without event.

    I thought I would say Toshiba out of unhappiness. I logged onto the Web site support pages and looked for information 'contact us '. Nowhere to be found. Therefore, it seems that I need a new laptop.

    It is very a pity but what to say. Each notebook is a high-end product and I think that a hardware failure can still happen.
    To avoid a disadvantage, I always recommend buying an additional guarantee.
    In this case, the warranty will cover everything.

    In just a few words about the blackout;
    Well, it sounds like a GPU (graphics chip) fault.
    But to be 100% sure, you can connect the laptop on the external monitor. If the same appears on the external display so you can be sure that it is a graphics card failure.

    Unfortunately, the graphics card is set on the map and it of not possible to remove only the GPU. In this case, the entire motherboard must be replaced.

  • Text in black with white border

    Hello

    I draw a text on the map with drawText and the text color is black. I want the text has a white border for visibility.

    Something like this:

    Is there a solution for this problem?

    THX,

    Andy

    Try this:

    paint the text to the x - y, y-1 in white

    paint the text to x + 1, y + 1 white

    then paint the text in black to x, y

    This should give you a reasonable facsimile of what you are looking for.

  • Satellite L350 - D 215 black screen with blinking cursor

    Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

    I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

    I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

    Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

    Hello

    I agree with Akuma.
    Blinking cursor means that the Windows OS can not be loaded / booted up.
    You need to reinstall new OS.

    If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
    Otherwise, you would need order a recovery disc Toshiba from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

    After a download from Microsoft update last week, my system has rebooted. He first had a screen blue error, rebooted, reported a disk error and automatically run CHKDSK. Since then, the system has started a black with white slider screen and nothing else. This happens at startup options (Normal, safe, safe with the last command good known configuration). Not even sticky keys would come to the top. CTRL-Alt-Delete, Ctrl-Alt-Esc and all other keys has nothing did. Even with a right click.

    I searched all over the web for solutions. I found (and tried) several over the past week, but nothing has worked.

    Here's what I tried...

    F8 held key on boot to the top and entered the startup recovery. Ran of recovery. Initially so found of disk errors. Those fixed. Then he said he could not repair the system and reported two pilot errors.

    Tried system restore. He said that I had no restore points (even if I know that I had before).

    With the help of recovery options, I went to the command prompt. Asked to RegEdit and load the Software hive. Checked the connection entry Windows NT; made sure, it has been set to explorer.exe

    The system, checked RpcSs Key hive. Already the NT AUTHORITY\NetworkService value

    Renamed event connects winevt and not create the Logs folder

    Removed the hard drive. Attached to another system (as slaves), and the registered file permissions. They have screwed everything up. The fixed file permissions and drive put back in original system.

    Œuvres self-retaining keys now. Do not, however, as my sticky keys doesn't have a link to configuration.

    Went back into recovery startup via the F8 key at startup. Now, when I run start recovery, it says that everything is going well and there is no problem.

    I have download the hotfix from article 977675 Microsoft, but I don't know how I can apply it without being able to get into windows. I would like to contact MS e-mail or chat support, but I can't get the product ID without being able to connect (frustrating talk).

    I would like to reinstall OS, but HP does not provide an installation disc with their systems (only a full restore partition). My system is backed up (with the exception of the Windows folder), but I really don't want to have to make a full recovery, as I have a lot of specialized programs and settings that would probably take me a week to re - install and re - set.

    Anyone have any new ideas?

    Hello

    Here's my usual BlackScreen convenience store, because it may be that you haven't tried
    or if you have access you might be able to come back and start some of them.

    ----------------------------------------------------------------------------------------------------------

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
    manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore there only to)
    being bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • setttings seem to have changed, now black background with white text. How do I change back? ___

    The settings seem to have changed (CAT sleeping on keyboard) wallpaper now black with white text and how the format appears on the screen has been altered.  How do I change back?

    The settings seem to have changed (CAT sleeping on keyboard) wallpaper now black with white text and how the format appears on the screen has been altered.  How do I change back?

    > How the format appears on the screen has been altered.
    I don't understand this part. Maybe you don't mind developed.

    Do a system restore. Pick a date before that happen as your restore point.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Black and white gradient?

    I am a tutorial and select a fill of a shape and choose the black to white gradient in the gradient panel grade

    1. I don't seem to have the black and white gradient. I don't see the fade to black shade of gradient. Is this the same thing, if not how to black with white shade of gradient?

    Thank you.

    This is the problem of the value by default is black to white this is what you're missing. You may accidentally selected among other predefined gradients and the default value is lost and you must re-create or reset preferences and then save before you perform a new or create a new document that he will also receive. But to do with the document you now you must re-create it. Watch the videos

    http://www.wadezimmerman.com/videos/BWGradient.mov

    http://www.wadezimmerman.com/videos/BWGradient2.mov

  • Why the objects on the artboard black and white?

    I was working in Illustrator this morning and has the selected text tool.  I clicked on the screen and somehow, everything changed in black and white, even if when you click on an object, it shows it is in color.  Also, I am not able to move anything.  I have no idea of what I did, but when I open a new document in Illustrator, it displays the same thing... only the contours.  Maybe someone knows how to solve this problem and what I did?  Any help would be appreciated.  Here is a screenshot.

    Thank you

    Cassie

    page1.png

    You can view entire contour

    If you're on a Mac (and you don't say) you have reached Cmd + y

  • Satellite L850 - 17 k - black screen with blue dots

    Satellite L850 - 17 k black screen with blue dots see photo
    It is THE video card, can't find it.

    See photos

    If you see the same on internal and external display LCD, I presume that the video card is faulty.

Maybe you are looking for