Screen on the Libretto 50ct problem

Hello!

My L50 has a problem with the internal TFT display. It starts and runs normally and I can control using UltraVNC or by attaching an external monitor, so it isn't a problem with the graphics chip.
But the internal TFT remains mainly black - after ignition, it gives a short flash showing noise colored with a darker in the middle of about a second task, then becomes almost black and shows that vertical lines brighter and darker than the change in appearance a little whenever the content of the screen is changed.
The * backlight still works * and on very rare occasions, the screen * lights correctly * and then shows no signs of a problem until I restart.

Since your laptop is not very useful when you can't read the screen, I used it as a small, low-power 'server' for the last year and a half, which did not cause any change in the situation of the screen.
I tried to re-allocation of places each connector who may be involved - the great connector of the main card for the Group of experts, as well as all connectors that leads from there to the module Sharp TFT itself and the connectors inside the module. I noticed a few connectors which, when unplugged, causes a white screen Uni, but otherwise, the problem persisted.

It would be a shame to withdraw from this cute little thing in a drawer just because of the screen.

Does anyone have a suggestion as to what could be the cause? If I knew for sure that would solve the problem, I could buy a replacement screen or wait an article damaged on ebay that has a working screen.

Best regards and greetings from Bavaria :)
-Tobias

Hi Tobias,.

Man, it's a pretty old baby. The last time I had something similar in my hands was 4 or 5 years ago.
In this case, I would say that the screen and the cable must be exchanged because the jury should be OK.

Why the screen and the cable? Because if the connector on the screen has some damage then the cable she also.
I guess that the controller of the screen has a few hitches, maybe a touch loose?

Hope you will restore your machine and should not be retired. :)

Welcome them

Tags: Toshiba

Similar Questions

  • Screen on the Libretto W100-106 of Secondany problem.

    I can't get the cursor on the secondary screen. He recorded I'm not touch as it moves the cursor to the top of the screen in normal view. And when I run in mode 'book' I'm getting the same problem. As in the right screen will not have the cursor on it, but will always record be affected by moving the slider on the left screen. Can anyone help?

    You found the solution to this?
    Yesterday, I saw this new booklet by my local dealer. I ve checked how it works a little and if I m remembering well, there was no problem to move the cursor on the secondary screen.

  • Satellite A105-S4114 - black screen, maybe the heating problem?

    Hey all

    I'm new to the Board and I really hope that someone can help me with my computer problems.
    I have a Toshiba Satellite A105-S4114. In the last week or so, it started to get a black screen. If I m in the middle of watching a video, the sound would just go to a repetitive tone (very annoying sound) and the screen freezes completely.

    He sometimes goes to a black screen. The screen is not black as if the CPU is off but it's dark and nothing is displayed. This occurs when the computer has been for a little. I have had it over 2 hours now, and if this problem persists, it will happen more frequently. I've updated all the software and windows xp. Some people tell me that my motherboard is dying and I can't do anything, but some people say maybe it's an overheating problem.

    The vent on the left hand does not always give off light, but the laptop gets hot enough. Is it possible that my fan is dying? In the case of this "black screen", the computer is not power down and for this reason, I ve people had told me that he is not an overheating problem.

    Any ideas?

    Help, please. I sprayed the CPU down to the dust, and it has gotten a little better. I hold hope that I don't need to buy a replacement right away. I've had this for about 3 years.

    Thank you, Danny.

    [email protected]

    Hey mate,

    I think that for the moment no one can really say what the reason, but I also think it might be an overheating problem and you should start cleaning your laptop first. The point is that if the laptop is overheated (e. g. graphics card), you might get a black screen, freezes or your laptop stops immediately. So if please try to clean and follow these instructions: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

    Of course it could also be a motherboard problem but the laptop cleaning is cheaper and quicker ;)

    If it doesn t work you can access a service provider authorized professional assistance.

  • When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

    I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

    I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

    I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

    > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

    > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

    Thanks in advance for your help :)

    Do restore of the system as a first step. If this fails,

    1. uninstall all software of Monitor 2

    2. unplug the monitor 2

    3. restart the computer

    4. connect the monitor 2

    5. install all the software monitor

  • my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

    my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

    Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

    If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

  • I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

    I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

    Hi Izzy Nagar,

    ·         Exactly when you receive this error message?

    ·         Did you do changes on the computer before the show?

    ·         Do you have any extended monitor connected to the computer in the past or at the present time?

    Follow the suggestions below for a possible solution:

    Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

    Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

    Ways to improve display quality

    http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

     

    Flicker of the correct monitor (refresh rate)

    http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

    Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

    a. click the Start button, click the arrow next to Shut Down and then click on restart.

    b. do one of the following:

    ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

    c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

    d. connect to your computer with an account of a user who has administrator rights.

    e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

     

    I hope this helps.

  • I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

    I have a message on the screen indicating the dell support center has stopped working how can I solve this problem

    Hello

    as you have problems with the Dell software, contact Dell

    http://support.Dell.com/

    Dell support at the link above.

    http://en.community.Dell.com/support-forums/default.aspx

    or ask in the Forums of Dell Support

  • I hope to find a solution to the problem of the video screen FOR the dell latitude 10 Tablet

    Hello

    I have the dell latitude 10 Tablet

    I have a problem in the video display device and especially if the video is HD with precision
    Video is very slow and "forced" terribly... I'm surprised this problem.
    Formate worked for the device is not not to solve the problem... Experience the same video on the w510 Acer Tablet and it works fine
    Fact the imbalance of the is the problem of my camera... or what specific problem... Help, please

    Hi ALI IBRAHEM,.

    If I understand you correctly, HD video playback problem has been resolved by installing the driver Pack for the user installing Intel.

    To control the imaging (Webcam) of Windows 8 machine does not need to install the camera application. Windows 8 operating system has 'Camera' app. You can access the application 'Camera' of the start screen. In case you are not able to see the application of the 'Camera' on the start screen, you can download it "Windows Store Apps".

    • In the start screen, click the tile 'Camera' to open the application
    • If the app invite you to use your camera and microphone, choose "allow".
    • Adjust the settings, if desired
    • To take a picture, click anywhere on the screen
    • The camera app saves all your loving photos and videos in a folder called "Camera Roll" in your photo library.

    Answer please if you have any other questions. I'd be happy to help you.

  • Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.

    Last month, I had a series of blue screens.  The problem points to the files Volsnap.sys or Classpnp.sys.

    I have a Dell Precision T3500, running 64-bit Windows 7 Prof.  The system is configured with RAID.

    Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that.  It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.

    No idea on how to stop this would be really appreciated!  Thank you

    Hello

    Results verified BlueScreenView WinDBG / DumpCHK.

    TrendMicro is most likely part of this question, as it is known to have caused or
    make these problems worse. Uninstall it and run the removal tool to prevent
    remains of troublecausing. The following recommendations to use during the test,
    even better all the time.

    TrendMicro removal tool
    http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

    List of tools to clean/uninstall anti-malware programs
    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

    ------------------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 6.x and 4.8 x

    Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    ==========================================================

    The Bug_Checks were D1 (19 long happened if he should really
    do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
    Components of Windows, which means something else led in error.

    1. Uninstall TrendMicro as it has a role - is not enough to just disable
    such that it will still load chunks of itself in memory.

    2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
    or other corruption could be at stake. Classpnp.sys is the SCSI class system
    dll checking and disk problems will affect the it. Run SFC/scannow, and then
    Checkdisk (chkdsk /f r).

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    =========================================================

    Other troubleshooting methods:

    BCCode: D1 0x000000D1

    Check these KB

    Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
    from sleep or standby extended: "STOP: 0x000000D1".
    http://support.Microsoft.com/kb/978982

    Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
    system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
    http://support.Microsoft.com/kb/2320550

    Those 7 other KB Articles are available
    http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10

    --------------------------------------------------

    Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
    methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
    programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
    If necessary.

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.

    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    I hope this helps.

  • Problem in the display of the icons on the screen of the device

    Hello

    I want to add labels or icons of the image on the screen of the device. I did it through canvascomponent.

    But the problem is when I run the application I got the label or the icons before the opening of the screen of the device. So, is it possible to set the position of the label on the screen?

    When I run the app I got the screen of the device and labels at the same time?

    I found the solution...

  • Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

    Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

    Hi Sammo,

    See this thread: Re: photoshop, 'kernel security check failed'

    Kind regards

    Claes

  • I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

    I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

    You MUST have a 64-bit computer and operating system... What is your computer?

    -Programs are supposed TO not view or download if they are not installed on your computer

    MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

  • My phone screen is not full screen on the phone, as they appear in Design view.  How to solve this problem?

    My phone screen is not full screen on the phone, as they appear in Design view.  How to solve this problem?

    Hey Wilson,

    Please contact the technical support contact customer service if the problem persists.

    Kind regards

    Akshay

  • When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

    When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

    Randy Ruttger

    Thanks for the follow-up.

    Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

    The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

    You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

    On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

    So the solution to the problem you presented in this thread could have been...

    1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

    2. move to a different version of Premiere Elements (which you did)

    I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

    Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

    Best wishes

    RTA

  • With the new Apple TV, I'm stuck on a black loading screen in the application to access all CBS. How can I solve this problem?

    I have the new Apple TV, and after seeing a show in the application to access all CBS I'm stuck on a black loading screen. This happened almost 10 minutes now and I don't know what to do to be able to find the main screens of the application and to be able to continue to watch the shows within the app.

    Press twice on the logo TV button then slide upward on the touchpad.

    The CBS app is stuck and hitting the button twice allows you to force the application to quit.

Maybe you are looking for

  • Why not Firefox 22 import profiles?

    I have upgraded to Windows 8 and 22 FF, unfortunately there is no Manager profile and no way I can find to import any old preferences. The information in the Support section seems hopelessly obsolete. And a Google search brings nothing useful. Does a

  • Cannot open Firefox: Mozilla Crash Reporter

    Recently, I have updated my firefox but in a few hours, it has stopped working. I constantly get a "Mozilla Crash Reporter" who says:"We are sorry". Firefox has been a problem and crashed. We will try to restore your tabs and windows when it restarts

  • How can I make Firefox request the password if the PC has been idle?

    If I leave the browser open it keeps all passwords, even if the computer goes into sleep mode.

  • y500; remove a ultrabay graphics card and put in a disk drive

    HI - first post - I want to remove the extra graphics card I have in the ultrabay (easy to do) and want to put in a disk drive it. Is there a particular type of hard drive I need? I'm a noob to this sort of thing. Any help is appreciated!

  • Support for Perkin Elmer 16PC FT - IR

    LabVIEW support a spectrophotometer Perkin Elmer of FT - IR 16PC?  I do not have the original software and need something to communicate with the instrument and make the %T and %R basic plots.