screen problem drop iPhone 6

Similar Questions

• camera screen problem locked iPhone 7

  When you take a photo in locked screen mode, you can not

  Press to display the image that you just take... He's black? It's as if the link to the photo album has been limited

  Hi Lslymrs,

  Thank you for using communities Support from Apple. It is a little uncertain, the exact behavior you describe, but it can be normal or expected. When you use the camera of the lock screen application, you will only be able to see your photos just taken and only as long as you stay in the camera app. If you return to the screen lock and then in the camera application, even if you don't release it, you will see more photo already taken. Please let us know if this is what you see.

  Kind regards.

• Problems on iPhone screen 6 Plus

  I have problems on my iPhone screen 6 Plus.

  Sometimes from nowhere, I see Apps open and closed when I don't click on them and also wrote the words that I type.

  I have to restart the cell, and after a while works very well.

  It is a general problem on iPhone 6 and 6 more?.

  Thank you.

  Lucas. -.

  It sounds like a defective screen digitizer. I suggest that take you the phone to an Apple Store for testing. I do not think it is a software issue, sorry.

• IPhone screen problems 5

  I have an iphone 5 with screen problems.  When the phone turns first of all, I can't drag the screen to enter my security code.  The screen is blank.  It will take several times before it stand for a long time, just enter the code.  I also have problems with the original key.  I downloaded the virtual home key, and I'm sure now.  However, when the screen is blank, I use the key home, which does not always, to get it back again.  It's very frustrating.  I'm 1.8 GB for use available, my capacity is 12.5 GB so I don't think that's all. I use the cloud for storage of photos, etc.

  Hello. Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Unbelievable, dust under the screen of the iPhone 7

  Good night everyone.

  I've posted a few times before here in discussions about the dust under the screen of the iPhone 6 s, which mine was when I bought it, when they changed my screen 9 times and when they exanged to renovated ones and even an Envoy to Ireland brand new with new warranty at all.

  Last Friday I went and waited all night to buy an iPhone 7 hoping being dust-tight its screen would be perfect, and as I got it, I saw something under the protection of screen thinking it was something that got stuck all by placing, but today, I deleted and found which can be seen in the attached picture (he can be seen in the crossbar left angle)

  Is it not possible to exchange it for another iPhone during the day 14 guarantee now that West no stock?

  Thank you very much

  1st world problems are something to see indeed!

• the screen of my iphone 6 (under ios10) freeze.

  my iphone screen 6 (under ios10) freeze everything using the bluetooth connection and take pictures. Need to reset to get it

  Hello captainmat,
  Thank you for using communities of Apple Support.

  I understand your message that your iPhone 6 is running iOS 10 and there are times when you're using Bluetooth and take pictures the screen freezes. I know how it is important for your iPhone to work properly using Bluetooth and take pictures. I recommend to use the steps in the following article to help resolve this problem:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Best regards

• Touch screen on the iPhone issues 5 after SW upgrade 9.3.2

  Hello

  I have an iPhone 5 that I bought just two years ago. The phone worked perfectly despite the fully loaded with applications, images and music. About two weeks ago, I upgraded the software to 9.3.2. Just after that, the touch screen started to work intermittently. When I managed to unlock, it will take seconds of use of the phone before that the touch screen no longer works again. I have to press the button several times until the touch screen comes back to life (only for a short period of time). It's totally unbearable. I can't yet answer phone
  calls.

  I contacted the technical support and all they got me to trying: restart the phone, restore it via iTunes for a backup, give it a new phone... and the problem is always the same. I've updated then 9.3.3 and same thing. I was informed by the technical support that this could be due to a problem with my hardware only made visible by a heavier operating system. Well, it's just not possible. It is not possible that my phone with applications 0 is unable to deal just with the operating system while running smoothly with the phone completely full before the upgrade.

  Someone faced the same question? If so, did you solve it? Thank you

  He Jeinser,

  Thanks for checking out the communities Support from Apple! I understand that you are having problems with the response of the touch screen on your iPhone. I can understand who want to ensure that you are able to use your iPhone, the way that you expect.

  You have already completed all the steps that I would normally recommend to solve a problem with your touchscreen, including restoring the iPhone and set up as a new device. From the information provided, it seems that your iPhone needs to be repaired. The following link should help you get started with the process and has links with additional information on topics such as the warranty and pricing of the service, replacing the battery and express alternative service.

  Repair - iPhone official Apple Support

  See you soon!

• Strange black screen problem Inspiron 1526

  Dell Inspiron 1526 - Windows Vista Home Premium (32 bit) - Service Pack 2 (problem started all with SP1) - AMD Turion (TM) 64 X 2 Mobile Technology TL-60 2.00 GHz - ATI Radeon X 1200 Series

  This is probably the strangest problem that I've never seen or heard of.  I've owned this phone for about a year and a half without any problem, then one day, I decided to put my computer into sleep mode by closing the lid (I've done several times before without problem.).  When I lifted the lid, the computer woke up, but the screen refused to show.  Thinking it was an easily solvable problem, I restarted the computer.  The computer turned on, but the screen was black.  After having turned the computer works enough times (probably 20), finally displayed screen and the error message say 'RTC Mode Fixed.  Date and time can be wrong. "I couldn't help but think"What the... ". "I ran into my share of issues of computer before, but nothing as weird as this.

  Assuming that everything was fine, I let the computer start normally and shortly after the BIOS, the computer screen suddenly turns off.  The only way I could get the boot sequence to pass the BIOS screen and start normally, I had to remove all the devices (including the power cord.)  After the computer has finally loaded completely, I was able to function normally.  Almost every time that I cut it however, the black screen problem happen again.

  A solution will be greatly appreciated.

  If you still experience the problem, or if you arrived after doing a search for the same problem with your Inspiron1526 (or other). The solution is to replace the CMOS battery. There was some problems with the connector of the screen becomes loose, but if reinstalling the display connector does not solve your problem, then the battery is dead.  The Mitsubishi CR2032 batteries from CHINA are down less than 1.5 volts in only 1-2 years. Looking at the battery that looks like they're a cheap copy of bootleg and probably not at all Mitsubishi. They all have the "Made In CHINA" stamp on the bottom edge. Unfortunately to get to the CMOS battery, you will need to disassemble the laptop computer entire almost to have access, but by replacing the bad battery with a reputable CR2032 3 v battery will solve the problem. After the first reboot, you need to give time for the BIOS to reconfigure and you need to reset the time system and date but the laptop will resume its normal operation after that.

  Unfortunately many calls to Dell technical service gave no help to this problem either. Technicians have even claimed to have no knowledge of what the CAPS and the blinking NUM LOCK lights meant. If you are lucky, you may be able to restart a couple times before the laptop doesn't start is not at all, but the time system must be reset - if this happened to you, it's a dead giveaway that the CMOS battery is about to fail. Once you hear the voltage of the battery drops to initial power engage readers and the fan will run for a few moments and then the unit will completely disable. Nothing appears on the screen.

• iPad 2 after iOS 10 air black screen problem

  Hello

  After having upgraded to iOS 10, my iPad 2 Air starts to behave himself regularly.

  After that have not been used for a while (maybe after say, a few hours or so), I cannot wake it up by pressing the home and power button. It is just black. So, I have to restart in order for me to use it.

  Does anyone else know this?

  See you soon,.

  Masimo

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Hello. I hawe a bit of problem my iphone 5 s. My flashlight is off work. Happy to help me.

  Hello. I hawe a bit of problem my iphone 5 s. My flashlight is off work. camera works but the only flashlight didn't work. can someone tell me, what is wrong? o, put an end to my flashlight button isn't greey, is normly, his show the flashlight is torned on but led not glowing.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• A red faded spot Appeard on the upper right of the screen of my iPhone 6. Is their a fix? What could have caused it? OS there a risk it my spread or worsen?

  Just today, I noticed a red fainted to task on the upper right of the screen of my iPhone of 6... Does anyone know what caused it? Or if theres a fix, is their a GTA it could spread or worsen?

  It very probably has some damaged pixels of the screen. Something like this should not "spread" on the screen, so if it not bother you that much, it should be OK to leave it for now.

  If you are embarrassed by it (or for some strange reason, it's even worse), I would say on a date in an Apple Store for them to have a look for you booking. They will be able to get it repaired if necessary.

  I hope this has helped

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• the screen of my iphone 6 is black since last night and it still does not

  The screen of my iphone of 6 has recently turned black. It does not work. I tried with everything: by pressing the main button and power that at the same time, connect to a computer and I ran out of options. I hope that this is not something difficult or expensive, as it is barely a month since I bought it.

  romuscavuzzo wrote:

  The screen of my iphone of 6 has recently turned black. It does not work. I tried with everything: by pressing the main button and power that at the same time, connect to a computer and I ran out of options. I hope that this is not something difficult or expensive, as it is barely a month since I bought it.

  Since we don't work for Apple or Apple here in this technical forum of user to user, schedule an appointment with the Genius Bar and enjoy your phone so that he was looking at.

• Split screen on the iPhone 6 sec more

  Is it possible to get more split screen on an iPhone 6s?

  N ° split screen was designed for iPads, iPhones not.  I've seen videos of youtube on the 'hacking' iPhones to activate the split screen, but I wouldn't recommend it.

• On the Satellite 1800-921 black screen problem

  Hello
  My satellite 1800-921 has started to give me a black screen after I turn it on. It loads well, go to the desktop and then the screen turns white and I can't make it respond. We can just distinguish the dialogs on the screen so I don't know if it is a screen problem or things I see on the screen are just ghosts...
  It's a bit worrying!
  Does anyone else have this problem? So far, it seems to happen when I turn it on. Usually, I have to turn it off and reboot to get it back and then it works very well.
  Thank you
  Nancy :)

  Hello

  to the old series, it may be that the FL inverter is broken or damaged the tupe of backlight. In both cases, you can see the screen but without backlight!

  To differi if it is a hard - or software error, you should start the laptop and ESC immediately to enter the BIOS. Then the machine must be running half an hour in the BIOS. When the rupture occurred it is quite sure that some hardware is broken. Otherwise, it is a software based and a restore with recovery CD Toshiba should solve the problem!

  Goodbye, TOK