Screen replcement on Tecra R840

Similar Questions

• Tecra R840-16J - Win 7 installation - how?

  Hello

  I want to make a new one. Clean instal win7 Pro in my Tecra R840-16J (a BSOD appeared only 6 months after I bought it!). I'll install an SSD too!

  Could someone tell me how to do? (I mean, which drives should I have to install hel?) I downloaded al 48 discs and Aps for my model when using win7 64 bit.

  Kind regards
  Paulo

  Hello

  Install the drivers in the following order:

  Windows 7 64 bit

  Driver USB-Serial V1.3.0
  PlayReady PC Runtime 1.3
  Infineon TPM professional package 3.60.2071.00
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface 7.00.02.1164
  Intel AMT 7.00.02.1164 software
  8.801.2.1 - 101225 a-111146C-Toshiba AMD display driver
  Intelligent management of the TOSHIBA v1.0.2.0M screen
  Driver Intel Rapid Storage Technology 10.1.0.1008
  Realtek Audio Driver 6.0.1.6271
  Intel LAN driver 15,7
  USB3.0 Driver 2.0.32.0rior
  ALPS Pointing Device Driver v7.x6.303.106_A
  Synaptics Touch Pad Driver 15.2.4.4
  Driver O2Micro 1.1.4.207G smart card reader
  TOSHIBA value added package 1.4.1
  Ricoh 2.11.17.02 card reader
  Intel Wireless LAN Driver 14.0.0.113.0.s64
  Intel Proset 14.0.1.0.0.s64 & 13. 3.0.0.1.s64
  ConfigFree 8.0.35
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 13
  TOSHIBA Fingerprint Utility V1.0.2.36
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Utility of rotating 180 degrees TOSHIBA v1.4.0.0
  TOSHIBA eco Utility 1.2.21.64
  TOSHIBA HDD/SSD Alert 3.1.64.6
  TOSHIBA HDD Protection 2.2.0.12
  TOSHIBA Service Station 2.1.45
  TOSHIBA PC Health Monitor 1.7.3.64
  TOSHIBA Sleep utility 1.4.1.7F
  TOSHIBA V4.00.4.12 VCR - HAS
  Intel Wireless Display 2.0.27
  TOSHIBA v2.0.4 synchronization utility
  TOSHIBA Media Controller 1.0.85.4
  TOSHIBA Media Controller plugin 1.0.5.13
  PatchFiles

• Tecra R840 - Ethernet and driver sound Dynadock question

  Hey,.

  Tecra R840, model PT429A-007004, does not work with the Toshiba dyna docking station.

  Specifically, the Ethernet and the audio driver for the dock dyna is not installed after running or installing the driver on the cd of the dock dyna or the latest driver on the site.

  Does anyone know a fix for this?

  Note: nothing in Device Manager to say that these pilots to dock a missing, only when you install the driver mentioned the wizard that Ethernet and audio drivers might not be installed.

  He also mentions that the dynadock has a problem with the graphics card edge, but we have not had problems with graphics, for example screens.

  > where to install the driver only mention Assistant that Ethernet and audio drivers might not be installed.

  _Regarding the driver LAN and Audio missing. _
  This theme has been discussed already in this thread
  http://forums.computers.Toshiba-euro...ThreadId=70771

  _The possible solution: _
  Navigate to the folder * C:\Program Files\DisplayLink Core Software *
  And here you should find the drivers for the network and its

• Tecra R840 - atikmpag.sys causes bluescreen

  Hello

  displaying videos on my Tecra R840 sometimes I get a blue screen with the atikmpag.sys driver.

  Happens to every time, but often - about one in four times or more.

  The blue screen occurs especially at the beginning of the video - but sometimes also in the end.

  In the download for my Tecra area, there is only one pilot display of 2012 - I have installed.

  I have Windows 7 64 bit, 8 GB of RAM and the AMD Radeon HD 6450 M.

  Does anyone have a tip for me?

  Thank you very much in advance

  Anne

  Hello

  Because this problem does not always, but sometimes, it would be very difficult to reproduce this BSOD and therefore, it is not very easy to say why the BSOD appears.

  Is that file atikmpag.sys belongs to the graphics card driver.
  It seems that the graphics card driver crashes, and therefore the BSOD occurs.
  But why?

  I have two different theories:
  (1) the graphics driver is not fully compatible with the new software installed, tools (games), etc., but the fact is that the Toshiba driver page does not provide all new GPU drivers for this model of laptop. The other point is that the same driver version worked correctly in the past and I m wondering why the same driver should not operate correctly now if it worked correctly in the past.

  (2) my 2nd theory is that the BSOD appears due to the higher temperature of the internal GPU. The highest temperature is mainly a reason for blockages of the system and also responsible for issues of the graphics card.

  Have you tried to reinstall/recover the system? Isn't it?
  I would recommend you do this using the Toshiba recovery disc. This procedure should always be made in the event of system problems.

  I also recommend you to clean the modules of cooling using a jet of compressed air. That would help you get rid of the dust. Dust is mainly a reason if it comes to a temperature higher inside the laptop.

• TECRA R840-16V to win7 64-bit to win10 level

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Posted by axiotidis
  

  I tried to upgrade my Tecra R840-16V (number PT429E-05M00KGE) form windows 7 64 bit pro to windows 10 pro through windows update. During the upgrade procedure is complete all seemed ok, but after a while, the system froze (even the mouse). I did a reboot in my system via the power button / stop, the system has worked well for about an hour and froze again. I did a reboot via the Start button / stop, one more time and I had the same problem after all. I did a restore of the system in windows 7 and everything works fine without any gel at all.
  Is this a known issue? Is there a solution or suggestion to update my system without problems on windows 10 pro?

  Thank you

  Hello

  Never solved this problem, I have the same problem with my Tecra R840. I have windows 10 initial installation when it was first released, however had the freezing issue (System fan would also begin running at 100%, that is very strong but whole machine was locked and would require a hard reset). After a few weeks of this question, that I started Windows 7 and which would be fine.

  However, just tonight I thought I would try the anniversary 10 Windows Update to see if that had solved the problem, unfortunately the same problem persists. After you have installed update Windows 10 anniversary (updated to Windows 7), the laptop freezes still. There a simple 3 minutes after connecting the fan turns 100%, and everything froze upwards.

  Thoughts/ideas or help here would be appreciated?

  See you soon

• Tecra R840-S8450 - power problems - help with Blink Codes

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

  Of course quite here, is that no one from Toshiba has the manual to find codes?

  Posted by dgwbdavid
  

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

• USB does not wake up after Tecra R840 goes to sleep

  Hello

  I have a Toshiba Tecra R840 on windows 7 sp1. I use a USB mouse, but whenever I put my laptop to sleep I have to go out and re put the dongle insert it again.

  I've changed the following power options:
  Under devices, USB, USB Root Hub power management "allow the computer to tun turn off this device to save power" is not checked

  It goes the same for generic Hub
  Under control panel, power options, USB, USB selective parameter settings is disabled.

  Does anyone have any suggestions?
  Thank you
  Tony

  Have hmmm you tried to remove/delete the USB hubs and controllers from Device Manager and install it again?
  Usually after restart again the system should automatically find the drivers and needs to be reinstalled all USB controllers once more

• Tecra R840-109 - alert HDD - unable to get disk information

  I turned on my Toshiba Tecra R840-109 and everything looks that the factory settings have been restored, but I still have my files on the hard disk in the users folder (where the system has also built a temporary user I'm connected now, I guess).

  At the opening, the computer asked me to do the things you do when you get a new computer (for example accept the license, install browsers, register fingerprints, if applicable etc.). In addition, it showed an error, alert HDD/SDD saying "Could not get the information from the disk, cannot use the alert function".

  Is there a way to solve this problem, that is, to apply the previous (original) user?

  An obvious solution would probably be to restore the system, but I don't have a backup set to the top (which I will fix as soon as this problem will be solved). Tried to reboot, nothing has changed.

  Information on the mobile phone: http://www.toshiba.co.il/en/disconti...ecra-r840-109/

  Any help is appreciated!

  Hello

  To be honest situation described sounds pretty confusing and not logical for me.
  If you do not have recovery (DVD or USB) media create using preinstalled Toshiba recovery media creator tool.
  After this use this bootable media and reinstalling the recovery image so you will have 'presets' again. After the installation of clean operating system, it is not possible to have the old data stored on the HARD drive, not on the C partition.
  The fact is that before the installation of recovery begins any HARD drive will be deleted and formatted.

  Sorry if I got you. If you have any concrete and clear questions do not hesitate to ask.

• Tecra R840-10 t: what interface supports the ODD

  Greetings,
  Tecra R840-10T (PT429E-00M007EP)
  Can someone tell me if the DVD drive is IDE or SATA? I'm assuming SATA but I want to know without a disc phillips and none of the form pages that I found mentions it.

  > Can someone tell me if the DVD drive is IDE or SATA?
  The new generation of portable supports for the majority of the SATA ODD (optical disc) and HARD drive interface.
  AFAIK this Tecra R840-10 t was equipped with the DVD-SUPER MULTI (DL) and this player supports the SATA interface.

• Tecra R840 mSata SSD installation in module 3G position

  Hello
  I have a Tecra R840-110 model, there is also a 3 G module inside, I would install the mSata SSD pcie slot.
  Is possible to use the mSata SSD instead of module 3 G pcie slot?

  Thank you very much for your help!

  I think that something like this is not possible. Card mother ports are not a kind of flexible ports.
  In the past, that Toshiba gave the second HARD drive, upgrade instead of the optical drive using special adapter.

• USB drive not recognized on Tecra R840

  My Tecra R840 will not only recognize the USB memory sticks. USB works fine with discs hard USB and wireless USB mouse. Help! Any ideas? Thank you very much

  Have you tested with different USB keys t and connected to different USB ports?

• Re: Tecra R840-199 - cannot get its ethernet card to pick up the IP

  Hello
  I have Tecra R840-199, Running Win 7 64 bit.
  I installed intel drivers for the network card. (Intgel 82579LM)
  the card is recognized on the system,

  but it will not pick up an IP address. (the network cable and port are working)
  Any suggestions on how to solve this problem.
  Ive updated the bios, and software service does not pick up all updated

  Hello

  According to the specifications of the laptop this laptop was offered with preinstalled professional Win7 64 bit. Original recovery image contains all the necessary drivers and after first boot all hardware components are installed correctly.

  Usually the LAN connection cable should be enough and your laptop should have full access to the network.

  Until we start the discussion, I have some questions for you:
  You use this original OS version that you got with your laptop?
  You have installed driver from the Toshiba download page?
  You may have problems at home or in your business?

• Tecra R840-16V down internet (no wireless or ethernet) connection

  Hello

  I have a Tecra R840-16V and I lose the internet connection for a few seconds 'all time' I power plug (or rear) or an external monitor (with VGA cable) or an external hard drive (USB port).
  This isn't really a problem! It's really annoying...
  Does anyone of you have suggestions?

  Thank you in advance!

  > I lose internet connection for a few seconds "every time."
  To be honest I've ever read on this issue. What do you mean by lose exactly?
  No interruptions of connection while loading some files or how did you notice connection interruptions?

  You said that to happen just for a few seconds so normally this shouldn't be noticeable.

  Your comments are greatly appreciated

• Re: Tecra R840 - 15K not recognized

  I recently bought a reconditioned-Toshiba laptop Tecra R840 - 15K. I can't find this model anywhere on the Toshiba site. When I enter the serial number Tosh. was told that there are no.

  My questions:
  a. What is an authentic machine or a fake?
  b. I want to improve the HD; the current HD is 2.5 "x 7 mm. Can I mount a 9.5 mm 2.5 "instead?

  Thanks for any help.

  Fake? How can it be wrong?
  Toshiba sticker, you can find the model number (PT42GE), and if you visit the Toshiba support page you can find this model of laptop.

  And Yes, you can use 9.5 mm hard drives.

• Tecra R840 - energy SSD after closing

  Hello

  Could someone tell me what than a ssd power consumption when the computer is turned off?

  I have a laptop Toshiba Tecra R840-16J (bougth 6 months ago) with a sweet Plextor M5Pro 512 GB ssd intalled. Yestarday, after a charge of 100%, I liquidated the laptop and today (after 4 pm) I turn it on! The battery was at 93%. Is this normal? What could be the cause of this decline of 7%?
  I use a bluetooth mouse but I thing that when I stop the laptop everything must be switched off!

  Kind regards
  Paulo

  Hello

  Some options such as wake on LAN or wake on keyboard drain on the battery even if the laptop is turned OFF.
  To avoid this, you need to turn off these options in the BIOS.

  Note: Don't forget save changes when settings have been changed.