screen resolution changed by itself and everything is HUGE!

Similar Questions

• After each start up, screen resolution changes

  Under Windows XP.  I replaced my hard drive and since this event, my screen resolution changed.  When I change it back, it's OK for the rest of this session, but then, after a reboot, it is back.  I need to change once again.   How do I 'Finalize' my change to the resolution I want?  Maybe I did something wrong with the installation on the new hard drive.  Any suggestions?

  Thank you

  Mike to GO

  Hello

  You can check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  You can also view the Microsoft Knowledge Base article mentioned below and check if it works.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Let us know the results.

• Screen resolution changes

  Hey guys,.

  My screen resolution changes while I use my computer. The text is the most notable, change to a lower resolution. It seems to happen when I'm using the Windows Explorer, but it's pretty random. Sometimes, the icons in the system tray will disappear too. For example, I have a file open, with a list of files, the screen flickers, the solution of problems and some of the graphics and icons disappear or are corrupt. So if I move my mouse over the names of files, they go back to the right size and resolution. So I might end up with half of the text to the right size and the rest all messed up.

  I use Windows 7 Ultimate SP1 on a Toshiba Satellite T110. I recently updated the driver of the CPU, Chipset, and I see that I have enough RAM. I deleted the software, run virus scans, malware scans, registry scans, lower resolution and changed the display settings and Windows Update, but it still happens. As I said, it happens randomly enough, it'll be fine for a while, and the only constant I can see, it's that happens when I use Windows Explorer. Any ideas on what to do next?

  

  

  Usually after installing a chipset driver a restart is required, so it may of happened after I installed the driver but should not happen after a restart or the next time you turn on your computer.

  J W Stuart: http://www.pagestart.com

• Screen resolution changes automatically

  Hello, I just installed Windows 7 Home Premium in my Toshiba Satellite M200 Notebook 2 weeks. And it seems that I have a problem with my VGA (Mobile Intel 965 Express Chipset Family).

  Sometimes, when I am trying to boot up my laptop and Windows displays the login screen, my screen resolution change to lower resolution. After login, the problem remains the same more Windows to disable Aero. But if I restart my laptop, the problem disappeared. It seems impossible to load the VGA driver during Windows startup.

  I already re - install the VGA driver (had 8.15.10.1912 version of Windows update), also install driver latest Intel yesterday (8.15.10.1930) but they have the same problem this morning. I never had this problem with Windows Vista.

  In addition, in my startup program, I only charge 5 applications: Kaspersky AV HD Audio Control Panel and Intel 3 program (shortcut icon from the bar and screen resolution utility)

  Any help will be appreciated.

  Hello Cliffflip,

  Thank you for your message.  If you want to completely remove Kapersky from your computer, click HERE.  You will need to download/install/run their removal tool.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• screen resolution changed after Windows update

  PC: Dell Vostro 220 s

  OS: Windows XP Professional SP3

  Monitor: Dell 2009WFP LCD, is the native resolution of 1680 x 1050 (according to CNET review)

  Problem: After an automatic update of Windows, my screen resolution has been changed to 800 x 600, where the police has been huge and fuzzy on the screen.  Then, I realize now the display settings only have 5 options, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200 and 1920 x 1440.  The last of them is out of range.  So I put it to 1600 x 1200, but everything on the screen appears stretched.

  I tried system 1) at the earliest days of restoration, 2) unplug the monitor and reconnect the monitor, the monitor 3) download the Dell Web site WFP2009 driver, nothing works.

  Nothing has similar problems, how do I get the near resolution of 1680 x 1050, which is classified to the native resolution for this monitor according to the CNET Web site, and I vaguely remember what the maximum resolution in the display settings.

  Appreciate any help.  Thanks in advance.

  Hi mumimi,

  It seems that your system was shipped with Intel graphics card. As several drivers are appearing with exclamation points, I would say that you can download the latest drivers here-> enter the serial number of your system-> select OS--> download/install drivers in good order as given here.

  Please respond to the findings. He won't be far away.

• Tecra M9: After Vista standy, screen resolution changes automatically

  Hello

  I use a Tecra M9 with Vista SP 1. The current display to the nVidia Quadro VNS 130 M graphics card driver is 7.15.11.126
  My native resolution is 1440 x 900, 32-bit color. (the resolution of the screen)
  Sometimes, when the computer comes out of standby, the resolution changes after the sequence to connect to 1280 x 800 and stays that way. I have to manually change back to 1440 x 900. This isn't always happens, but say all of 1 times 2 the computer wakes from sleep.

  What is a (faulty) driver problem?

  Kind regards

  charlieMOGUL

  > Is it a (faulty) driver problem?
  Perhaps this problem could be related to the graphics driver.
  Have you tried to update?

  See European Toshiba driver and update the graphics driver.

• Screen resolution changed with updates

  I just stop my laptop and he proceeded to make updates. After the updates, it changed my screen resolution and I can't get it back. I have a 3 month-old HP G56, someone knows how to fix this? I tried to change the resolution of the screen in the control panel and it always looks weird. Thank you all

  Suggestions:

  1. set the DPI

  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2 do a system restore, back to the date BEFORE the updates of windows that your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Note: change your windows to MANUAL updates.
  After the restoration of the system, the same windows updates will reappear.
  Install them one at a time. Check on the screen. If ok, install another, check on the screen, and so on.
  In this way, you will know for sure if the updates are the culprites.
  If know you that the updates is the culprite mark down its KB # > doing a restore of the system again > when updates will reappear again, right-click the update incriminated > click Hide

  Go to the Windows Update section, ask a question about this offending update.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• screen resolution changes now too big to operate pop-up menus

  With the latest windows vista (Home premium), update my screen resolution has changed. When you try to restore

  the resolution that I had changed the DPI to 150% and reduced my screen resolution to fit the screen so

  make the size of the image is now too big for exploitation (the mode buttons are not visible) of drop-down menus

  Is it possible to change the resolution of the screen and or the DPI without the pop of the menus so that I can change

  the resolution of the screen or adjust the DPI?

  With the latest windows vista (Home premium), update my screen resolution has changed. When you try to restore

  the resolution that I had changed the DPI to 150% and reduced my screen resolution to fit the screen so

  make the size of the image is now too big for exploitation (the mode buttons are not visible) of drop-down menus

  Is it possible to change the resolution of the screen and or the DPI without the pop of the menus so that I can change

  the resolution of the screen or adjust the DPI?

  Set the DPI to 96.

  This tutorial shows you which resolution setting, your monitor must have:
  http://www.Vistax64.com/tutorials/84291-screen-resolution.html

  In addition, refer to your user manual to see which is the "recommended" resolution for your computer.

• I turned on my computer and everything is huge! all sites are too large on my screen. Why? and what do I do?

  What never happened... I want my normal desktop not huge, I don't see the whole page without moving backward... What I can do... I'm what some new to all this, but never seen it before?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• screen resolution went to icons and text oversized; cannot resolve with resolution tabs

  A recent installation of the video to my screen resolution caused Dvd converter enlarge text and icons. I can't go back to
  normal resolution as the adjustment of the resolution "Apply"tab's background." What can I do to normalize?
  Peter; Australia

  A recent installation of the video to my screen resolution caused Dvd converter enlarge text and icons. I can't go back to
  normal resolution as the adjustment of the resolution "Apply"tab's background." What can I do to normalize?
  Peter; Australia

  =========================================
  Two ideas...

  (1) do a system restore to a time before your installation
  the converter should return things to the way they were.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  .
  (2) right click on the bar at the top of the window in question
  and choose... Move.   Then you can move the window in
  position with the arrows on your keyboard / and then press ENTER.

• Screen resolution got really big and now I can't make normal.

  Screen resolution is too large.

  Hello

  Make sure that you are logged on as administrator.

  Use the system restore to a point before that happened.

  Start - Control Panel - restore and backup center - upper left repair Windows

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  ==========================================

  Right click on desktop - customize - display settings - Set resolution.

  Right click on desktop - customize - top left adjust font size (DPI)

  CTRL + mouse wheel works ZOOM

  CTRL + and CTRL - work ZOOM in and out

  Your mouse/touchpad probably incorporates a ZOOM to it.

  Your system also has a magnifier built in which could be a problem - it can also often be programmed
  to work on the mouse/keyboards.

  How to turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  To see if your mouse/touchpad is set to ZOOM or enlarge use Control Panel - mouse.

  The TouchPad also has Hotkey controls to verify with the help of machine to online system
  documentation and their forums, where appropriate.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Screen brightness change by itself

  I have a HP Elitebook turn 810 Windows 7. The brightness of the display continues to change by itself - it illuminates, then fades then brightens and fades. When the brightness changes I check the level of brightness, but it has not changed. I tried to turn Adaptive brightness and the, but it did not help. Thank you so much - it drives me crazy!

  I doubt that it is a Windows 7 problem.  It is probably a hardware problem.  I suggest that you contact HP support.

• Screen resolution changes after Windows updates

  New update keep affecting my screen resolution in large print? When I install as a group, I have to restore it using an external hard drive.

  Hello Steve,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I appreciate your time and patience.

  This problem can occur either because of incorrect display settings or if the display driver is not updated or is corrupt.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions in this article and check the issue.
  Reference:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  If this does not help, use method 2.

  Method 2:
  Update display driver of your computer from the manufacturer's Web site and check out them.
  Refer to this article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  See also:
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Latitude D630 screen resolution changes after no mooring and docking station re

  I have a user with a Latitude D630 running Vista business with an external monitor.  Resolution 1680/1050 the value.

  Stop, UN-dock, take the computer laptop home.

  Lift the rear of the laptop, d-dock, power.

  Now, the resolution is 800/600.

  This notebook is a replacement of his first D630, which had the mobo and other HW replaced until I'm the new laptop as a replacement.

  Tested with several monitors and docking stations.

  Anyone else seeing this?