Screen saver does not not on Windows 8

Similar Questions

• Screen saver does not work Windows 7

  A minor annoyance, but still... Screensaver on clean installs of Windows 7 Beta and RC 7 fail to activate. None of the Windows screen savers will not work.

  I found this work BACK-code around on the "unofficial MagicJack Forum.  It really works better than anything I've seen, because it actually replace orders that magicJack uses to disable management screen saver and power.  It gives you a feature complete and normal of two things back.  In addition, the patch will stick, even after a reboot.  Just be sure to use the first set of controls to find the correct path for your machine. The differences are indicated by points of question marks (?). Then run the second set of commands by using this path.

  This was posted by "Satoru," who got the information initially to dslreports.com:

  "Here's some new information that will help Windows 7 and maybe Vista users as well. Lending well I got this information from here and have tested to work under Windows 7 starter

  http://www.dslreports.com/Forum/r24708708-lucky-you-I-don ' t-think-so

  The following command displays THAT MJ has a request to prevent the system of visualization and energy savings. If you get an error, you must run as administrator command prompt:

  Code:

  C:\>Powercfg /requests DISPLAY: [PROCESS] \Device\HarddiskVolume? \Users\? \AppData\Roaming\mjusbsp\magicJack.exe SYSTEM: [PROCESS] \Device\HarddiskVolume? \Users\? \AppData\Roaming\mjusbsp\magicJack.exe AWAYMODE: None.

  The following commands replace (turn off) the power request:

  Code:

  powercfg /requestsoverride PROCESS magicJack.exe DISPLAY powercfg PROCESS \Device\HarddiskVolume? \Users\? \AppData\Roaming\mjusbsp\magicJack.exe DISPLAY /requestsoverride

  View a single order has the full path, as it appears in the output of queries. Be sure to use the path of your output of queries. You need both, or energy conservation will not work.

  This patch will survive it recharges. You can check by running the command before and after a reboot

  Code:

  powercfg /requestsoverride

  Hope this update helps everyone"!

• Portege M400: screen saver does not work

  Hi all

  like many of you, I think, I need the screen saver protected by start-up automatically when I let my M400 unattended for some time.
  Everything works fine if the bluetooth is introduced to the wide. Otherwise... the screen saver does not start automatically.

  Site Microsoft learns something about the problems related to (Microsoft mouse) wireless devices that do not allow the screen saver appears.
  The proposed solution is to kill a process called PCMsomething, or download an update windows named KBsomething and install it.

  I actually a bluetooth wireless (non-Microsoft) combined with my PC mouse, but no PCMsomething process is executed and, although my mouse is turned off, the screen saver organizers can't work until I turned off the bluetooth of the M400 too. In addition, windows update does not suggest a KBsomething patch to install (maybe because my mouse is not a Microsoft one?).

  Any idea to solve my problem?
  Thanks in advance.

  > when I let my M400 unattended for some time.
  For this application, Toshiba has designed the FN + F1 feature to lock your laptop.
  When you want to leave your laptop using FN + F1 and lock it.

  It is a lot easier than this solution with screen saver.
  Check it out.

• Screen saver does not work properly

  My screensaver pc does not work properly.

  Hi NavjotChhina,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  The screen saver does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/916256

  Screen saver may not start in Windows XP

  http://support.Microsoft.com/kb/326719

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Screen saver does not always work

  My screen saver works sometimes and sometimes not.  What can be the problem?

  Hi RandyGarner,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. the problem occurs with all the screensavers on the computer?

  4. you receive an error message when the screen saver does not work?

  Method 1

  I suggest that you change desktop theme and then check if the screen saver works.

  Change desktop theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Method 2

  If the previous step fails, then I suggest that you install the updated drivers for the graphics card on the computer by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  See also the below Microsoft article and try the steps mentioned if you have recently installed a wireless computer pointing device.

  The screen saver does not start after the installation of a wireless pointing device

  http://support.Microsoft.com/kb/913405

  I hope this helps!

  Halima S - Microsoft technical support.

• Screen saver does not start automatically

  original title; SCREEN SAVER DOES NOT START AUTOMATICALLY

  My screensaver stopped automatically to come if I use an excerpt it's turns on and will remain lit.  How can I fix or can uninstall and reinstall?

  It becomes a problem growing with the screen savers. The issue is background programs and services that are enough tasks that the computer never thinks that it becomes "inactive". Programs cannot do any real work, but are cycling through their operations individual enough to keep the computer "awake".

  Try to start your computer with a "clean boot", (see Microsoft Support articles below). If this resolves the issue and you definitely want your screen saver, you'll have to discern what substantive programs and services that you can live without being active all the time, and turn them off.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs interfere with your game or program
  http://support.Microsoft.com/kb/331796

  For what it's worth, the systems that I watched recently with this problem were 'smart phone' synchronization software recently installed and who is constantly looking for something to synchronize with regardles to know if they are connected to what whether or not. Change the start of these programs and services 'on demand' to 'always' solves the problem in these cases.

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• My screen saver does not work and it's turnd.

  That check for screen saver does not

  Hi k4trm,

  1. what happens when you set a screen saver? What screensaver you have defined on the computer?

  2. you receive an error message?

  3. did you of recent changes on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the screen saver does not to work.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails then I would suggest that you update the driver for graphics card on the computer visiting the site of graphics card manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Change your screen saver

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen saver does not react when I "wiggle" the mouse or press "Esc"; 'Enter', etc.

  I had the same screen saver running for centuries (it goes right through my photos), but in the last few weeks, I am unable to find the screen to 'wake up' 'wiggle' of the mouse or press "Esc"; 'Enter' etc etc.  Its very frustrating because I have to press several keys at random and then wait about 5 minutes for the screen saver turns off.  I'm still on Windows 7 and it is up to date.

  No idea how to get the screensaver to respond normally again?

  Hi Christine,

  I understand that your computer screen saver does not react when you move the mouse or press ESC.

  This problem may be due to the following reasons:

  • Several processes that run in the background.
  • Problem with screen saver.

  Please follow the methods and check them off below if it helps:

  Method 1: Clean boot

  IF this problem is caused by several programs running in the background, clean boot will help you understand.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Change the default screen saver

  Please refer to the following article which will help you change the wallpaper and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Hope this information helps, for assistance please answer.

• screen saver does not work when magic jack is pluged in. unplug mj it works

  screen saver does not work when magic jack is pluged in. unplug taking magic, the screensaver works properly.

  09/05/10 the MagicJack has released an update that prevents the screen saver and "standby" mode. They are aware that people are upset on this issue, but they seem not to care.

  Here is a simple solution to the problem. I've used it since 10/09/10 and it works perfectly.

  Restore the functionality of screen saver / display after MagicJack diverted these features...

  Click on the Start button in Windows 7

  type cmd in the search box

  Right click on cmd and run as administrator if you are not running as an administrator it will not work!

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY

  Make sure that you type the capitol letters and lowercase no look of magic make 'J' ack it's capitol as well!

  Press enter

  Now unplug your magicjack

  Restart your computer and let the unplugged MagicJack

  Once the computer starts together your screensaver for a minute then let it sit for a minute activate screen saver...

  Now plug your magic let sit for one minute Alto screen saver is now active!

  If you want to activate the sleep as well, follow the same instructions as above, but simply type this line instead.

  type: powercfg /requestsoverride PROCESS magicJack.exe DISPLAY SYSTEM
  
  If you follow these instructions, your sleep/screen mode will work as before.

  Kind regards
  ZzyzxDude

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you

• screen saver does not - says he needs the following file: dsdx932.dll where I get it

  screen saver does not - says he needs the following file: dsdx932.dll where I get it

  Try the Direct X Installer Web -.

  Download details: DirectX end-user performance

  If the d3dx9_32.dll file is missing in fact the Web Installer will install a. If it is corrupt you then if you delete the file Sytem32 and SysWOW64 (with 64-bit Windows) Web Installer will install a new copy.
  The Web Installer does not overwrite existing files.
  When you do not get an error of direct x with a specific file name. You must use the
  Direct X Redistrubitable June 2010 as it will overwrite existing files of DX.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Screen saver does not start on my Qosmio F20

  My Qosmio F20 screen saver does not start even after reaching the specified minutes 'wait '. I tried several ways to fix it, but to no avail. I really want the screen saver to appear.

  Hello

  Well, usually the common screensaver that are pre-installed on the operating system to work properly. I put t know what screensaver you use, but I guess that you have installed a 3rd party screensaver. In this case you should check these settings. For the most part a screensaver 3rd party has a parameters.

• Screen saver does not fire

  The screen saver does not illuminate.

  "LTC-311" wrote in message News: e6e49e12-de5b-4db6-854 c-63716c63842e...

  The screen saver does not illuminate.

  Check what is running in the background - use the Task Manager first.
  The screen saver while using more than about 5% of the processor will prevent activation
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Screen saver does not work under Vista.

  I am running Vista Home Premium, but I was never able to get the screensaver running. Done everything I should, but it just never worked.

  Is there a solution?

  Here is the article from the MS Support about wireless pointing devices and screen saver...

  The screen saver does not start after the installation of a wireless pointing device

   http://support.Microsoft.com/kb/913405

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 3D Windows XP screen saver does not work after a CMOS battery failure

  I have a dual-boot Windows XP / Windows 7 Ultimate 64 bit set in place.  Somehow, after a flat battery CMOS, my 3D screemsavers do not work.  I mainly use the Windows 7 but I'm checking the XP.  The screen saver settings seem OK but the preview and the screen saver appears not to do 3D.  I've updated my drivers nVidia GTX 275.

  Note Pleaser that everything works well under Windows 7.

  Hi smlunatick,.

  (1) what version of Windows XP are you using?
  (2) if it works much earlier?
  (3) you use multiple screens?
  (4) were there any changes to the computer before the question?
   
  See the method mentioned below.
  You receive an error message when you try to use or to preview a 3-d screen saver in Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/925086
   
  Three-dimensional screen savers may not appear correctly on computers that use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/839693
   
  3D screen saver may not work if you extend the desktop on some portable computers
  http://support.Microsoft.com/kb/325550
   
  Get back to us with more information on the issue so that we can send the exact resolution.