Screen saver goes my screen even when I use it.

Hi, I have an iMac (late 2015) and the screen to go to the screensaver, even when I use it. My screensaver is located at 10 minutes before you go to the screen saver mode. It happens as if the meter time don't know what I'm doing. It happens more frequently when I change from one application to another. Any ideas why it does this? Thank you.

Is it possible that you have active corners enabled and you moved the cursor in the corner and trigger the screensaver?

Tags: Mac

Similar Questions

  • Satellite M30: random characters came on the screen even when installing

    Hello

    I have problems with my Satellite M30. It shows random characters or signs on the image. Other than this computer works well. I thought it could be virus, because I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.

    So I reinstalled it but random characters came on the screen even when installing. If anyone can advise what this could be?

    My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

    >... I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
    > Then I reinstalled it but random characters came on the screen even when installing. Can someone advise what this could be? My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

    For me it also looks like a GPU malfunction... what you is to connect the external monitor to the laptop. If the same strange signs, characters will be visible on the second screen while the GPU is defective...

    Well, it would be the worst case, because the whole motherboard must be replaced in case of malfunction of a GPU chip...

  • Photoshop CS6 - screen flashes when you use brushes with new MacAir 2013

    The Adobe team would you please answer the questions reported by multiple users:

    http://forums.Adobe.com/message/5449199

    Several users have some severe in Photoshop CS6 screen flicker when you use type tools more large brush (cloning, Eraser, brush, healing spot, burning and dodging).  As many on this thread know it's ugly and unusable! The glitter is widescreen black boxes, sometimes the entire screen goes black.  It only seems to happen when we put the cursor on the image to change.

    Hardware: MacBook Air 13 ", Haswell 1.7 GHz, 8 GB, SSD 512 Software:

    Photoshop CS6 v13.1.2 20130105.r.224, v10.8.4 OS X (and perhaps others)

    Looks like a CS6 is not compatible with the new MacAir. Please look into this and advise.

    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64 operating system: Mac OS 10.8.4 system architecture: Intel CPU Family: 6, model: 69, Stepping: 1 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

    Post edited by: GSVAI

    Apple has released an update to the MacBook Air 2013 which corrects this problem: http://support.apple.com/kb/DL1672

  • Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

    I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

    Firefox Pei
    "C:\Program Files (x 86) \Mozilla" PEI

    Nothing happens with every order.

    I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

    If you have any ideas, I had appreaciate that your expertise!

    Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
    you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

    Fix Firefox problems caused by malicious software

  • How to put a foot in a scrolling page, keep it visible site even when scrolling, using PC

    How to put a foot in a scrolling page, keep it visible site even when scrolling, using PC

    Hello

    Please select the footer items and pin them on the bottom like the screenshot below.

    Concerning

    Vivek

  • What do I need to run irca.bat, even when I use (only) Olite DB integrated?

    As we know, can I use an external (full) Oracle database or a database of internal Olite.

    I have to run the script in irca.bat even when I use the built-in DB of Olite internal?

    Where is this irca.bat? I not found it in the installation folder.

    The 'default' field is automatically created without the script irca.bar or the part of it?

    Peter

    Not the basic version manages this for you. But if you upgrade to any other version 10.1.3.1 you need run the SQL scripts to olite.

    see you soon
    James

  • Print layout on screen rotation when you use the arrow keys

    I must have accidentally pressed a wrong key combination.  Now, when I use the arrow keys on the keyboard while typing of text, orientation changes screen, according to which key I hit it, I hit the down arrow, the text on the printed page rotates 180 degrees.

    How can I fix it?

    Biggar Gordon

    Houston, Texas

    Thanks for your reply.

    I googled the question of fun and learned you can hit CTRL + Alt + an arrow key to change the direction of the display on the monitor.  Pressing on the same new keys cancels the function.  I must have accidentally done to create the mess in the first place.

    I've done the same thing if I had rebooted the system.

    Thank you very much!

    Biggar Gordon

  • my HP Pavilion 15 e-038tx screen fades when you use internet

    I bought a new laptop from HP Pavilion 15-e038tx 2 weeks before, now, it seems that when I use internet when a blackish site comes, it fades and when I change the site of a white backgrounded one, it turns out normal return. I have an AMD Radeon 1 GB graphics card to the inside. I n don't know what is happening on my laptop. Please help me with suggestions. God bless you!

    Hi cecilsunny,

    I'll be happy to help you with questions of gradation you encounter. It is indeed a question of power. Here is a document to a third party site that show you how to change.

    http://www.eightforums.com/tutorials/21702-Dim-display-automatically-turn-off-Windows-8-a.html

    Thank you

  • Why is my desktop stop often randomly, at all hours of the day and night without prompting even when I use the computer. This is even though I changed the power option setting.

    Why is my desktop standby stop so often?

    It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.

    It happened like this:

    1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.

    2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.

    3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however.  He showed the computer CPU is entered in mode 'sleep'.

    4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.

    5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.

    6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.

    7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.

    8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...

    9. However, even if the VGA cable is changed, the stop is always the same, as before.

    10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.

    11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.

    12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.

    13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.

    14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.

    15. for more information,.

    My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.

    Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware.  I don't know what problem is.

    I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.

    16. the information contained in the computer, start/program/computer/properties, gives the following information:

    It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.

    It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.

    17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.

    18. I hope to hear your solutions with you. Thank you.

    Run "cleaners" or optimizers may have caused a number of problems.

    And since you have them installed some time ago a system restore won't help.

    Run the System File Checker

    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/

    Maybe to repair your installation of win

    Ensure that the chipset drivers have been updated by the author of the motherboard

  • Keep the bar from the top hidden in full screen, even when said on

    When you are in full screen view and you press the cursor of the mouse to the top of the screen, you will see the top bar.

    Is there a way to do not do? (You will then need to press F11 to get out)

    Add code to the file userChrome.css below default @namespace.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    #fullscr-toggler { display:none!important; }
    

    The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

    You can use this button to go to the current Firefox profile folder:

    • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
    • Use a text editor like Notepad to create a userChrome.css (new) file in the folder chrome (file name is case sensitive)
    • Paste the code in the userChrome.css file in the Editor window
    • Make sure that the userChrome.css file starts with the default @namespace line
    • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css.
      Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file
  • Why Muse is extending out my screen even when enlarged?

    Muse dialog boxes are open in weird, be huge. The first image shows the Site Properties box, as it opens. I am able to grasp the top gray bar and move around, but not resize. The second picture shows my whole screen when the Page Properties box opens. Some of the options are visible in the upper left corner. I can't move this box autour, so I can't access these options.

    The problem is also present on the screen in outline view. The Master-pages section, which is usually at the bottom apparently hangs "off screen". As I increase the size of the icons on the page, the tops of the master pages come into view at the bottom of the screen.

    The dialog boxes will open normally when I reduce my resolution at about 1280 x 1024. When I bring res up to 1920 x 1080 normal, the problem reoccur. A thought is that Muse can operate as if I extend my screen to another monitor.

    Things I've tried: reboot the PC, resettlement of Muse.

    Site Properties.JPGPage Properties.JPG

    Hello

    Thanks for the tip, Muse works properly again. The real solution was very similar:

    1. find the Muse app / exe file and right click

    2. Select properties, then go to the tab "compatibility".

    3 deselect option: turn off the display settings high ppp phasing

    Thank you!

  • I want to print the data on the screen, even when the print command is not available

    When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.

    Hi Whitepolarbear70,

    Thank you for visiting Microsoft Answers.

    I have some steps that may help you.

    Method 1

    Try to take a screenshot of the library. To do this, follow these steps:

    1 open Windows Media Player.

    2. open the library and click on the following combination of keys
    -Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).

    4: open Paint or Microsoft Word, and then press the following key combination
    -Ctrl + V which will stick to the screenshot that you took
    3. adjust the size n PRINT

    Method 2

    You can try export playlist of media information by an application word by following the steps in the link below:

    http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/mediainfoexp.aspx

    We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.

    The process is a little different:

    Follow this workaround solution to install the exporter of media:

    Step 1 - Download and install Media exporter Info

    You can try to run the program in compatibility mode for Windows XP.

    Make older programs in this version of Windows

    http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

    Step 2 - use of the exporter to export of information media

    Open Windows Media Player.  A small Media exporter Info window must already be open.  If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media.  If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.

    Click Properties to select where the file is saved and what application to load it in.  Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).

    Click Export.   The file will be exported, but it will contain much more than just artist names and album information.

    See the link given below where the user had a similar problem.

    http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/adc55535-e1a5-42E7-9EA1-f93c6334b523

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why Firefox garble my text on the screen. When I use my zoom to a larger text windows stops. Other browsers don't do that.

    The text becomes garbled (fuzzy) to the smallest font size. When I increase the font size in Windows help zoom feature that confused blurreness goes.
    I am running Windows 7 Home Premium with a PLANAR PXL 2430 MW monitor with an ATI Radeon HD 2600 XT graphics card.

    This problem does not occur in Internet Explorer or Google Chrome.

    Please notify

    Some problems rendering of fonts are caused by the graphics driver incompatibilities. Could you try disabling the use of Firefox graphics acceleration hardware?

    You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    the button Firefox orange (or the Tools menu) > Options > advanced

    In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

    If you restart Firefox, display is improved?

  • sites Web isn't going to erase, even when I try to clear the history and restart... They ALL return dozens of them. This makes unnecessary Firefoc. Why?

    Why did this suddenly happen that when I go to Firefox the screen is clogged with websites, I've been on in the last hours, and they don't fade and do not allow me to return to my home without difficulty bbc site

    In the Options window to the general Panel to scroll and put SHOW MY HOME PAGE(you probably have show my windows and tabs from last time here), if you set the BBC homepage, then whenever you open firefox, you should see your homepage from BBC.

    See:

    https://support.Mozilla.com/en-us/KB/options%20Window%20-%20General%20panel#w_startup

    See also:

    https://support.Mozilla.com/en-us/KB/session%20Restore#w_configuring-session-restore

    Thank you

    Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

  • Qosmio F60 - change the screen settings when you use the DVD player

    When I try to play a DVD using the DVD BD player a message that tell me to change the setting of the screen I followed their instruction to no availo. I am running Windows 7. The DVD plays on windows ok support.

    Any help would be appreciated

    Hi ametec.

    This DVD BD drive has been preinstalled on your computer?
    Which message get you exactly? Maybe you can download a copy of screen or something else

    In my opinion this problem is only related to this because the Media Player DVD player everything works
    For example, I use VLC media player for all my audio and video files. It s a small freeware player that can play most audio and video files. In addition it s not necessary to use a special DVD playback software.

Maybe you are looking for