Screen SP2009W gel

Similar Questions

• Satellite A200 - white screen and gel

  Hi Experts,

  I have this machine for 2 years. It was no problem. Last month, he began to display a white screen, and at the same time, it has been frozen after 3-4 hours running. Push the power button to restart, it fozen soon. I replaced a new fan and cleaned the dust inside. But the problem is still there. Someone has ideas what is the problem?

  Thanks in advance.

  Hello

  The issue appears only after a long period of use is good?
  Eventually the higher temperature affects the graphics chip.
  The question would appear again until the graphics chip to cool
  This is my theory
  What do you think about this?

  It could also be a RAM problem anything is possible and that is why each part must be verified
  In your case, I recommend you to contact a technician for laptop. The guys could check the parts. I mean it of better to check the hardware, then replace only the defective part rather than buy parts and hoped that the replacement would solve the problem.

  But listen buddy; If the graphics card chip is really affected then replace the motherboard and this could be a costly affair!

• (FIXED) Screen XT1068 gel

  Hello!

  recently started having problems with my phone XT1068 unlocked bootloader

  After locking the screen when I press the power button / stop

  I slide to unlock and is it the screen is frozen can not do anything

  work a sometimes lower and upper part of the screen

  When the upper part is running I can get in settings and everything works it

  but when I return to the office are frozen again

  (see photo) and there's another weird thing down left there is icon phone sometimes zoomed in it's like I would move it to the other place, but I'm not in touch with her. And it's frozen!

  Sometimes, it works as it should be

  Do you have a factory original, launched without configuration noting helped...

  Safe MODE does not help!

  Help, please! is this software or physical damage?

  To cancel the guarantee completely disassembled the phone...

  and what I found A LITTLE(don't know not material) CONNECTOR of CABLE WHITE "FLAKE, DUST, RESIDUE" WE (law on contacts) Of SCREEN/DIGITIZER (stupid me took no photos...)

  EPIC MOTOROLA THANK YOU for this beautiful quality construction

  FIX of a problem

• HP 310 1125Y - blue screen and gel

  I have a HP 310 1125Y that was purchased in April of this year.  The operating system is Windows 7.  I get the blue screen error message or it will freeze when on internet or application such as Word 2010 and Excel 2010. Once in the shop, the technician has played a DVD and it just stop, deleted and would not come.   I got it in the shop twice. Whenever they tell me that's not material, it's the software.    Someone had this problem?  What did you do to solve it?

  Hello pmb222: this can help until an HP expert can answer you back. I'm just a Toucsmart computer user. Click on help and support next to your program from the right list under default programs. During the opening type on the blue screen error in the search box. The next window will say resolution stop (blue screen) errors in Windows 7 there are given several options to help solve the problem. You already know that this is not a hardware problem. So that makes it easier to fix.  Read it, so most likely you will have to restore back at an early stage as long as it's software problem. Good luck. If you still have problems let us know.

• M6-1205dx Windows 7 screen Freeze/Pixilation

  I got my computer from windows 8 for windows 7. I did it before I had done all the research on how this is something that will be super hard and give me a lot of problems. Evil goes through what I did so that we can try to understand what went wrong.

  I tried to install windows 7, he said he did not support Legacy mode enabled, then I have partitioned the hard drive and erased everything, I used the GParted program. I was able to install windows 7 after that. I didn't think it through that I had not all drivers readily avalible to install on my computer. I made a post here and has been gently guided to were I could get some work drivers for my computer.

  Now I am Reciving is that. I at randome times screen Get gel/pixilation - the pixilation isn't all over the screen right into small sections or small lines on the screen, the only way to deal with this is to make a manual stop by holding the power button. The other question I am reciving is also at randome times my computer will restart, and then start back upward with the error message that allows me to choose if I want to start in safe mode or not.

  I understand that I could probably reinstall windows 8 and solve all my problems, but I don't have a windows disc 8 to do this. Any help would be really great.

  This is a brand new computer I just picked up 12/06/2013 did a bad Hardisk sectors check no..  Do you have a RAM check all past and I have also not found that any errors in the event log.

  Hey mmacegan91,

  Windows 7 is not supported on your platform, no official drivers are available for that combination of operating system and platform, and so questions are likely.

  That said, the best option is to install an operating system supported, that the system has been designed - in this case, Windows 8. If you did not create recovery media before you erase your drive, you will need to order some directly contacting HP Support (800-HP-INVENT).

• Satellite A30-203 freezes during installation of a different operating system

  Hello

  I tried to install Windows XP Professional on my laptop.
  It came with a pre-installed version of XP Home Addition.

  I tried many CD, Windows 2000 Pro, Windows XP Home, Windows XP Pro, but every time that I boot on this CD, the screen n gel 'instilation Windows is putting on' manage to get the menu section.

  I've also tried 2 other drives with the same CD, and they always give the same results as before.

  It would be a great help if someone could advise me more.

  Kind regards
  Al

  Hello

  I think that the on pre-installed home version of Sp1.
  If the installation cannot be performed with different OS, so in my opinion however, something wrong with the hardware.

  It s very strange what happens on two different HDD so I don't think the HARD drive is damaged. Maybe the dysfunction of memory?
  I put t know exactly why this happens, but you can try to remove a module, and check if it happens again.

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• The camera USB driver

  My guard computer crashing, either go to the blue screen or gel so bad that I have to press the power button. Then windows troubleshooting tells me that the problem is due to a camera USB driver, but she doesn't tell me how to remove it. When I try to find this driver, I can't. Can someone give me some ideas on removing this driver? Please keep in mind that I am barely computer literate.

  Hello

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  If you still bluescreens then so tell us BCCode or Code numbers to stop.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• New computer laptop freeze after power connection (there is a delay, not immediately)

  Hello

  I'm having a problem with my laptop Fujitsu Amilo Li 3710 newly purchased. When I plug the power while the computer is turned on, it would freeze completely (no movement of the cursor or keyboard) I put off and then back on to fix. Often, but not always.

  But I realized that this isn't an instant freeze, because the laptop starts to load and changes the brightness of the screen according to the Power Options before the frost. So I guess it's not a motherboard problem.

  I disabled the battery in the Device Manager if the system will not recognize AC battery operation, the problem disappeared. But it won't let me see the remaining battery charge.

  My installation of Windows is fully updated. It's the SP2 of Vista Ultimate x 64.

  What can we do?

  Thank you.

  Hello

  Thank you for your answer, but I'm sure this isn't a hardware problem because I think I found the culprit who is "State of the PCI Express link" in Power Options that should be set to OFF.
  In addition, the laptop NOT Batt-AC swtich successfully, but when he FOLLOWS the rules Power Options, it freezes.

  Scenario:
  Charger plugged in,
  Battery charges,
  Changes in screen brightness,
  Gel.

  If it's a hardware problem, he would certainly like:
  Charger plugged in,
  FREEZE (as the power glitch will take effect so little time before dealing with the brightness etc...)

  Again, so far, the "State of the PCI Express link" seems have solved the problem.

  Any other explanation or the info is welcome from all over the world.

• Media player controls

  Hello

  is there a way to implement the player controls (play, pause, stop,...) as those used in the drive multimedia blackberry shipped for use with the Player object?

  More in detail, how can I show/hide commands? Pushing another transparent screen containing the controls on the top of the screen causes gel video...

  Can someone show a code example?

  Thank you

  You can do with BlackBerry OS 7, but not in earlier versions.  In previous versions, you must change the video to be able to adapt the controls around him.

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Gel to the import screen?

  Hi all. Me once again. Currently, I am trying to import images and FCPX freezes on the import screen, then I have to force quit and open it again, only so he can freeze once more when I try to import images. The program itself seems to work fine, aside from that. I tried just by clicking and dragging the video files, but who doesn't, either. Any suggestions on how to fix, or alternative ways to import media? Again, thank you all for your help! You are great!

  You must give the tech specifications complete media you speak and your system.

• Satellite A500-17 x gel when it is in full screen mode

  I bought a Satellite A500 x 17 in December-, it came with Windows 7. I am really disappointed with her because she seems to have a number of construction problems.

  The most annoying is that I can watch streaming of videos on Youtube or iPlayer but mode if I set the screen mode full screen, it works for a few seconds then freeze. The sound continues, but the video is frozen. If I hit escape he will happily play the video in small but put it back to full screen and the screen freezes after a few seconds.

  I've updated the video driver to the latest version and have the latest version of the bios installed.

  Any ideas?

  Hello

  To be honest, a good friend of me bought a Satellite A500 too but it is very statisfied with it. I talked a little bit with him this phone and Windows because I too think about buying it. He can t notice any problem and Windows 7 works like a charm, much better than Windows Vista. The same thing that I read many others

  As regards your problem it is difficult to say what is the cause. You have already updated driver display and BIOS, which was a good decision I think. But the more interesting thing: which Internet browser are you using? I m using Firefox browser and I can recommend it.

  In addition, it would be interesting to know if the same happens if you watch DVDs (without streaming on the Internet)?

• Re: Satellite A200 1 M 5 blue screen & gel

  I have an older A200 10 months under Vista Home Premium that came preinstalled on purchase.
  Since the beginning, but more regularly now, it freezes in any program several times a day and is now crashing with the blue screen to come before the dumping and restarting itself.

  It seems to be a major problem, according to the number of people making similar comments on the net and offering all kinds of weird answers and solutions.

  I use this computer every day for business and cannot afford this ridiculous downtime nor I believe that should I have to do anything... it's a new computer!

  What's his problem?
  What is the cause?
  Can it be fixed?

  I can't afford to be without it, or I can afford a the size of the time in the repair shops, until the answer?

  Thanking you in advance for any possible solution/s

  Andrew Putyra
  OZ-LINX.

  Hi Andrew

  AGENTS can result from severe software or a hardware problem.
  But the fact is that the BSOD is a deviation and so it is not easy to say what causes this problem.

  First of all, it is necessary to know if its software or hardware related problem.
  You can find it using the Toshiba Recovery CD. After the new installation of operating system the laptop should run stable and should not occurs the BSOD.

  But if the BSOD will persist, then the problem could be caused by faulty hardware.
  The BSOD appeared on my laptop Toshiba-not too much, and it was related to the temperature inside the laptop.
  The high temperature was a bad influence on the memory modules.

  I cleaned then cooling of modules using a jet of compressed air and the BSOD appeared not.
  But look, man. This does not mean that this could be the reason even to find you BSOD errors.
  So as you can see, it's really not easy to say what could be wrong.

  If the BSOD will persist even after recovery again then I recommend to contact technical service for a detailed notebook check.

• New screen of the iPad 1 Air gel IOS 9.2.1

  The iPad I bought last week has an intermittent screen freeze. If you restart it, by pressing the HOME and ON / OFF buttons it will reset and work for a short period of time, but then the screen freezes i.e. you cannot select any of the icons on the Home Page. Can I have a defective unit?

  I have the same problem with an iPhone iPad Air 2 and 6.  The iPad can go through many cycles of freeze/reboot and then is OK for several hours before the problem repeats.  Sometimes after a reboot, it goes directly to the home screen, without going through the PIN/fingerprint reader.