Screen touch Inspiron 2350 has stopped working

Similar Questions

• My network card on my Inspiron 1750 has stopped working suddenly.

  My network card on my Inspiron 1750 has stopped working suddenly. I left the computer, while I was working online, went for about 2 hours, and when I came back, I wasn't online more. I can't reconnect to the internet. I was on the phone with the cable operator for two hours Tuesday night, and they said that I probably need an updated adapter. My computer tells me it is good, but then again, I can't connect to the internet to check. I tried an ethernet connection, but it is not recogniziing either. What should I do?

  Hi Joyce,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue that you are facing problem with Internet connection in Windows 7. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Aspire 8942G. The on screen volume level display has stopped working.

  When I use the wheel of volume on the keyboard, I would see a numerical value on screen from 0-100 indicating the volume level.  It has stopped working.  The volume and the volume in the taskbar icon work properly.  Any ideas on how to solve this problem?

  Update: I found that the problem was a change of setting in Norton 360.  He is currently working.  Thank you!!!

• Buttons and screen of blackBerry Smartphones has stopped working.

  Hi all

  My Blackberry works today - strange as usually very reliable. Problems: I can used is no longer the screen - it high lights up the apps but they won't open when I push on, buttons work. And he starts to turn his car.  He gets calls, but you can pick up.

  Odd - until this morning it was working fine but now nothing works at all.

  What is really strange it is the sensitive touchscreen, but does not when you click. The screen lock has also stopped working. Basically, everything is bolloxed

  Any suggestions?

  Probably tired...?

  Thank you

  Tim

  Yep, it's pretty common,

  Do this now. Remove the battery for at LEAST 3 days and put the device in a bag of uncooked dry rice. He's going to soak up moisture.

  An alternative to rice, is leave the unit with the battery removed, sitting at 3 days on top heat emitting an electronic device, such as a cable box, stereo amplifier, something with dry heat.

  The recovery key is the several days without putting the battery to check it out.

  Remember, electricity plus water is not good.

• Touch pad/keyboard has stopped working.

  Hi there. im hoping someone can help me with a question im having my laptop. for some reason any my touchpad and keyboard stop working. I tried reintalling windows to correct the problem that it does for one day and then the same thing happens again. When I checked in Device Manager and clicked on the PS/2 mouse, he said that there is an error code 10. If I uninstall ps/2 and reboot the laptop this solves the problem for a while, and then it happens again. My OS is windows 7, I think it has been upgraded to windows vista (I recently bought this 2nd hand computer laptop) so im not 100% sure on that. the date of the driver for the ps/2 compatible mouse is 21/06/2006. I tried to look on the Web site for a more updated keyboard to update driver, but I can't seem to find a. She seems to have all other drivers dismantled for the keyboard driver.

  any help would be greatly appreciated
  concerning
  Johnny.

  Hello

  Test the laptop using the external USB keyboard.

  Its certainly not related issue the keyboard driver keyboard driver is part of the Microsoft System and cannot be installed separately.

• screen internal iMac 2009 has stopped working

  Hello world

  I recently made a bunch of system updates (I've been long) and my internal screen no longer works. At startup, the gray screen appears and then goes to black before loading the full operating system. I connected to an external monitor that seems to work without problems. Every now and then when I wake up my computer, the internal display works for up to a minute then goes black again.

  I tried some basic troubleshooting things that seem to help: 1. turn off the computer, unplug and leave for a few hours. 2 reset the NVRAM 3. I tried to run AHT but I'm do wrong ("D" of operation at startup) or I do not see the it, as my external display only started working once the operating system has started.

  I wonder if it's a hardware problem or a software problem or even how I know.

  A few years ago, I upgraded to 32 GB of RAM, which is not officially supported but have not had any problems with the computer since I did the upgrade.

  I'm on an iMac 27 "2009. MC507LL/A

  Any help would be greatly appreciated on how I can fix this, or at least to know the cause of the problem. Please let me know if there is any additional details that may help to resolve the issue.

  Thank you very much!

  You have the same problem if you try to restart in RecoverHD?  If you do,

  Then, you can pretty well assume that you have a hardware problem.

  If the startup in RecoverHD works fine, then restart normally with the external display

  and back up all your data as a precaution.  Then reboot in Recovery and reinstall

  OSX.  He should ' t do anything else, but the backup must be just in case.

• the envy 100 printer screen is partly dead (has stopped working)

  E screen has a problem. the bottom of the screen in part went dead the bottom to wy about half to the top of the window. This dead zone seems to be getting bigger.  The printer is atill impression, but the "copy" button and other actions went walkabouts!

  Hi gaorr,

  I understand that the display does not work.

  I'll be happy to help you.

  Make sure there is no damage to the power cord and it is connected directly to a wall outlet.

  The printer should not be exposed to an electric or magnetic field.

  I would like to do a hard reset of the printer.
  While the printer is still on, unplug the power cable to the back of the printer and the wall outlet.

  Wait 10 seconds and connect the power cable to the wall then the back of the printer.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Contact ID has stopped working

  After the 9.3.1 update my ID of more Touch iPhone 6s has stopped working. All my fingerprints have been deleted and it won't let me add them. The option is grayed out.

  Looks like a hardware problem. Before taking your phone to the local Genius Bar, make sure that you follow all the steps below:

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Visual Basic 2010 Express application - 'windowsapplication1 has stopped working ".

  Hi guys,.

  Next week, my 11 year created with visual basics project is due. My program is complete and works perfectly when debugging. However, we hand upward like a file executable/installation files + project. Only problem is that as soon as I try to install my program, he stops at the splash screen and displays "windowsapplication1 has stopped working" instantly. I tried it on several computers and failed on all three. They were running Windows 7 (Home Premium x 64), Windows 7 (Enterprise x 86) and Windows 8 Pro x 64 which all .NET 4 nave installed.  I'm new to this so if you need more information, ask if you please.
  See you soon,.
  Daniel

  Hello

  You should report this issue in the Visual Studio Forums: http://msdn.microsoft.com/en-us/vstudio/aa718325.aspx

  Additional information.

  Troubleshooting Visual Basic Express: http://technet.microsoft.com/en-us/subscriptions/ms172574.aspx

  Thank you.

• Screen touch S410p has stopped working

  Touch screen of my laptop feature stopped working just in time. When I turned off my laptop, tere this update of windows which lasted more or less an hour. After that, the touch screen has just stopped working. Note that there is no installation program before uninstall antivirus - all programs and files in the laptop is as it was when I bought it.

  Running Windows 8 unilingual laptop

  We'll see. I didn't know what exactly I did, but the touch screen feature is stable now - more no stop service after a certain time. I upgraded to 8.1 and windows updates installed. Who must have done the trick. in any case, I thank very you much for helping me with this problem.

• iPhone 6s more touch ID has stopped working

  ID touch has stopped working, I'm in iOS 9.1.

  Is there a fix for this problem?

  Hi rulmer,

  If you are not able to use Touch ID on your iPhone, the steps below can help restore this functionality to the device.

  • If you have just restarted your device
  • If your fingerprint is not recognized five times in a row
  • If you have not unlocked your device to more than 48 hours

  • If you have just registered or deleted fingerprints
  • If you try to open Touch ID & access code in the settings menu
  • If necessary password is defined on immediately under settings > General > Restrictions

  If you still need help, follow these steps. Try again after each step:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Tap Settings > Touch ID & access code. Make sure that the Unlock iPhone or iTunes and App Store is lit, and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.

  Use the ID button on iPhone and iPad
  https://support.Apple.com/en-us/HT201371

  Kind regards!

• U920T satellite screen has stopped working

  The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  Any help in this matter would be appreciated.

  > It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet.

  This means that there is nothing wrong with the graphics chip on the motherboard, but without doubt the connection between the screen and map mother isn t OK or maybe the internal display is faulty.

  Is that it is a hardware issue and you should contact Toshiba authorized service provider in your country for repair.
  If the warranty is valid, the laptop must be repaired for free.

  Welcome them

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite A100 - screen has stopped working

  Hello

  yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

  The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

  This has me worried and I reinstalled vista from the cd, but now the screen never... never.
  But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

  Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
  Does anyone have experience with this?

  Hello

  I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
  Did you ever done some update the BIOS on this machine?

  Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

  Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

  If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

  You can also try some update BIOS if it is not already done...

  Welcome them