Screen touch S410p has stopped working

Touch screen of my laptop feature stopped working just in time. When I turned off my laptop, tere this update of windows which lasted more or less an hour. After that, the touch screen has just stopped working. Note that there is no installation program before uninstall antivirus - all programs and files in the laptop is as it was when I bought it.

Running Windows 8 unilingual laptop

We'll see. I didn't know what exactly I did, but the touch screen feature is stable now - more no stop service after a certain time. I upgraded to 8.1 and windows updates installed. Who must have done the trick. in any case, I thank very you much for helping me with this problem.

Tags: Lenovo Notebooks

Similar Questions

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

    I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

    Can you help me?

    Hello

    It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
    I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
    I guess that you are having regular problems with a USB mouse.

  • iPhone 6s more touch ID has stopped working

    ID touch has stopped working, I'm in iOS 9.1.

    Is there a fix for this problem?

    Hi rulmer,

    If you are not able to use Touch ID on your iPhone, the steps below can help restore this functionality to the device.

    • If you have just restarted your device
    • If your fingerprint is not recognized five times in a row
    • If you have not unlocked your device to more than 48 hours
    • If you have just registered or deleted fingerprints
    • If you try to open Touch ID & access code in the settings menu
    • If necessary password is defined on immediately under settings > General > Restrictions

    If you still need help, follow these steps. Try again after each step:

    1. Make sure you have the latest version of iOS.
    2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
    3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
    4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
    5. Tap Settings > Touch ID & access code. Make sure that the Unlock iPhone or iTunes and App Store is lit, and that you have entered one or more fingerprints.
    6. Try to register another finger.
    7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

    1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.

    Use the ID button on iPhone and iPad
    https://support.Apple.com/en-us/HT201371

    Kind regards!

  • Satellite Z830-10U - Touch Pad has stopped working

    I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

    Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

    All help gratefully received...

    Hello

    What happens if you disconnect the USB mouse?
    You can use the touchpad again?

    From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

    For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

    You can find it here:
    Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

    One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
    It is worth to check also

  • Then installing game Big Fish, drmactivator application has stopped working, appears on the screen, this program has stopped working

    drmactivator application has stopped working

    Hi Gradatim,

    If you receive the DRM activator error message do the following to correct the problem.

    1. click on start

    2. right click on computer

    3. click on properties

    4. Select advanced system settings

    5. under performance click settings

    6. go in the Data Execution Prevention tab

    7. click on TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY

    8. click on apply and then OK

    This will solve your problem of drmactivator.

    For more information follow the links below.

    http://Windows.Microsoft.com/en-us/Windows7/what-is-data-execution-prevention
    http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista black after login screen and Explorer has stopped working error

    Hello world

    I have a very big problem. Whenever I connect to my computer that is running Windows Vista Ultimate Edition all I get is a black screen and a mouse pointer. I can use Ctrl + Alt + Del or Alt + Ctr + Shift lift the the Task Manager, and from there I can run firefox. Once in Firefox I can use the option open the file to find programs, do a right-click and then run them. But I want my back office. When I try to run Explorer from the Task Manager and then I get an error message saying it stopped and must be closed. I also keep getting an error message for something like 'Windows Search Protocol Host' or somesuch. A large part of time that this will just about a five-minute cycle in a style of window minimized down thing then the error message poopping upwards. I am also quite unable to open Control Panel or MSCONFIG. Whenever I try that they freeze and I get an error message saying that they have a problem and need to close. Also I did not change my software recently. In fact it worked fine yesterday when I was with Photoshop Elements 7.0. Another thing that can help anyone trying to find an answer that is in most of the forums help I saw people talking about going into regedit (something I CAN open it) and put the shell on explorer.exe. Mine is already set to explorer.exe. It is also something else that many videos help and forums have said I should close explorer.exe in Task Manager process tab, then run it again. I don't have an explorer.exe in the processes tab and when I try to run it I just get "WIndows Explorer has encountered a problem and needs to close."

    Please help people, I'm going nuts without a desk job.

    PS. I use the computer with the problem to type this.

    Hi, Eric D1979,.

    Glad that you've found the malware but it would be very wise to check further as there is no program can
    detect and remove any malware, and often some that is easy to find is bundled with others which are very difficult
    and later you really be touched when it is active. Better to be safe now than sorry later.

    Hello

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Satellite M40X-189 - Touch Pad has stopped working

    The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

    Hello

    In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

    There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

  • Satellite L510-S432 - Touch Pad has stopped working

    Hi all.

    I bought this laptop last 2 weeks, it works well at first.

    It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
    However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

    I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
    I try to restore the system, but failed.

    Need help, thanks first to all who help.

    Hello!

    To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

    I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
    But before installing the new version, you need to remove the old version first.

    An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

    Good bye

  • iOS 9.2 Touch ID has stopped working

    I have an iPhone 6 Plus and recently upgraded to IOS 9.2.   Unfortunately, the contact ID no longer works.    I added a fingerprint, but using the new footprint does not work either.    It was also very difficult to form the new imprint. Now in applications such as Amazon and Apple pay don't work at all using the fingerprint. I tried to reset and nothing changed. Any ideas?

    Restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Touch laptop has stopped working!

    Yesterday, 31/07/14, my mother was uploading images on my laptop HP Pavilion TouchSmart 15. When she finished, I wanted to watch a video on YouTube so I'm on the computer, but on the lockscreen, I couldn't drag and so I had to click and when I got to my place of password, he didn't touch keyboard that appears usually there. And now I can't read some of my games and I have lost some capacity that this laptop great brings me. Can someone tell me what I did? My mother said the only button what it does press f5 at the top of the keyborad. What is the problem?

    Hello Great_Glob,

    As you have gone through the entire document above without success, I have recommended to perform a backup and restore of the operating system on your system. To do this, please follow this document on the backup of files (Windows 8) , and more to perform a recovery of the HP (Windows 8) system. This should help to restore your system to its original configuration by the manufacturer.

    If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

    http://www.HP.com/cgi-bin/hpsupport/index.pl

    I hope this helps!

    Concerning

  • Touchpad has stopped working in my Satallite L850

    Hello

    My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

    Kind regards
    DAV

    > Touchpad has stopped working in my Satallite L850
    How to understand this?
    You can toggle touchpad by using the FN + F9 key combination?
    The touchpad driver is installed correctly?
    Touchpad is listed in Device Manager?

  • my Skype has stopped working

    I updated latest version of Skype and I use family vista premium, I can always connect but after a few seconds message appears on the screen of Skype has stopped working...

    Looks like you have successfully updated from Windows XP to Vista, but have not updated device drivers. They are virtually all versions of Windows XP. Try firat to update drivers:

    http://www.service.ASUS.com/#! downloads/c1wax

    In addition, uninstall application ASUS Virtual Camera, this virtual video capture device we know conflict with Skype.

    Also, make sure you have the latest version of IE9 Internet Explorer installed.

  • Scrolling touch pad has stopped.

    Scrolling touch pad has stopped working when you slide your finger upwards & downwards the edge on the right side, what could be wrong?

    Hello

    Control Panel - mouse - look for the TouchPad settings - mine is on the device settings tab
    and yours may be different (it is NOT the Scrollings tab which is for the mouse). On some
    You can enable and disable the scroll and/or the size of the area and the sensitivity of the value
    the touchpad.

    Some will have a TouchPad progam/control icon in the Notification area near the clock-
    at the bottom right.

    Check with the manufacturer of system support, documentation in line, or forums as there probably
    are shortcut keys that enable and disable the touchpad functions.

    ==========================================

    If necessary: (make sure that you have restarted at least once, if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
    The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
    (drivers), now right CLICK on the touchpad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
    RESET

    This will refresh the driver for the TouchPad and battery USB.

    Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
    device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Microsoft Picture Manager has stopped working I am facing this problem two previous hours__

    Microsoft Picture Manager has stopped working, I faced this problem two previous hours.when I open programs view massage on screen photo managrt has stopped working

    Hi Araud,

    What programs do you speak? Remember to make changes to the computer before this problem?

    This problem can occur because of no present conflicts of Microsoft programs on the computer, I suggest you try the following steps:

    Step 1: Put the computer to clean and test start

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • PCD.exe has stopped working

    Sometimes I get an error message screen: "PCD.exe has stopped working".  The query option MS to check the problem shows no effect or results.  Closing screen is the only other choice, but it recurs regularly.  Is that indicates any problem specific to worry and can be corrected.

    Thank you

    Hello

    PCD.exe is PC Doctor, a diagnostic tool that comes on many Dell computers. Call Dell Support and
    help forums. Cleaning below might help once you know that the system is malware free.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    It has also been known to be replaced by malicious software then you should check for this.

    No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
    is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
    than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
    you are, of course, that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
    Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
    the anti-virus software, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Do this cleaning once you are sure that the machine is clean.

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Tecra M11-134 - Windows 7 USB ports problems

    I have three USB ports, that which is a SATA port. SATA port stopped working earlier, but I reinstalled it, after what it worked again. One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show

  • Re: Can't do anything when I open Office 2007

    I can't do anything when I opened the Office at all, I'm free emplyed and do my books as soon as possible. It asks for the product key but the sticker at the bottom of the laptop has rubbed off. up until last month I was able to use word, exel etc. f

  • Qosmio F10 and WinDVD Creator: capture unrecognized devices

    A similar problem in a previous post, but the proposed solution does not work. I am trying to record from VCR using the creator, but it lists no capture device, despite video and audio going OK on composite in. I have to do to get to recognize the en

  • DAQmx and PDM not always work

    Hello I am new to the DAQmx and PDM vi and I'm hoping someone can help me. The attached code contains several structures of matter, but only one of them has the DAQmx and PDM vi running through them. My intention is to record the output voltage of tw

  • Integration with JMeter

    Hello Ask the advice of any plug-ins available for JMeter with Foglight? Need to match and the JVM statistics into JMEter business scenarios... Thanking you advance all n, SR