Screen turns off during a video session on Sony Bravia TV.

Similar Questions

• the phone screen turns off during a call... No control over the phone

  My Defy screen turns off during the reception or to make a call... Impossible to control the phone... need to take out the battery to turn off the call... Help! PS this could be a software issue or user?

  Do you have a case on your phone? It seems that the proximity sensor is processing the phone as if it were close to your face. A case or a screen protector can cause problems if it includes the proximity sensor - near the earpiece.

• Laptop screen turns off during an update of the windows system

  Hello world

  I got a new acer laptop with windows 8 last week. Today, there was a small system update that requires a restart of the system to apply the updates. So I restarted my laptop, but I have not seen any sign of update 5 minutes (maybe my internet connection is slow, I don't know...) So (stupidly), I decided to manually cut my laptop and maybe he would return to his State to not update so I might update later. But now the display lights. I can hear the fan working and lights are turning, etc. But I don't see anything. Please help me.

  You are amazing for the quick response. Seriously. I got to the store and they said it had nothing to do with the update or turn off the power. It is the LCD LED screen. It was defective, and I got a new free of charge. Thanks again

• Screen turns off during the passage of programs (version 38)

  Second time thanks to this... It started yesterday. When I tab (switch) between programs on my desktop, the thunderbird display shuts off. Sometimes, he returned in a few seconds. Otherwise, if I click on the Calendar tab and then return to the e-mail tab, it clears... until I have turn back. This does NOT happen with other open program windows. There is no upgrade for all programs that I know. Very annoying.

  I reinstalled 31.7.0 and the problem disappeared. Had tried the betas v.38 and they did the same thing. Very strange and I was about to go to another client, because it was so boring. Party at the moment. Whatever it is, it has to do with v.38.

• Laptop screen turns off during a rotation to 90 degrees. OK, less than 90.

  The laptop screen will be empty to a blank screen when the screen is rotated about 90 degrres or more. (a ususal viewing angle)  If the sc reen turned 30 degrees, the laptop works very well and the screen is fine. Unfortuantely I can't work with the screen almost completely closed.  Microcenter computer says it is the logic board but the problem seems so mechanical in nature.  MAchine works fine otherwise. Logic board of expensive repair for a 4 year old laptop. Any suggestions or ideas.

  Replacement of the resolved display cable problem

• How to set the amount of time before the screen turns off during the slow activity

  Adjust the idle time before the screen saver stops

  Right click on the desktop | Customize | Screen saver | Change the power settings.
   

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced

• T420 screen turns off and turn it back on when the AC adapter / CC is attached or removed

  You are working on your machine, staring at the screen and the power failure... Yes - something quite common in these parts of the world... but no worries, the screen darkens slightly according to the diet plan and you hardly notice. Then, when the backup generator kicks in and the power is activated again, the brightness of the screen is back to your usual setting. Meanwhile, it is not a gene. Right?

  Well, that's what should happen... except that most of the time it doesn't work! Most of the time, the screen turns off and then turns on remove the main power and reinstall it. Note that this never happened once with T61 or T41p.

  Initially, I assumed it was because I had an external monitor attached... maybe it was to reconfigure something there? But then, it happens even without the external monitor. Then, I tried looking for the video driver updates... maybe this bug had been fixed to the... no luck there.

  So, finally, after having known this more often now, I thought I would get feedback from you all. Any advice?

  Check the Intel Media profile with the power settings. If a battery is "Maximum economy" mode then it should be in Exchange for 50 Hz to 60 Hz... Change it to balance or maximum Performance and see if its ever-changing from 50 Hz to 60 Hz...

  If all else fails, try updating the video driver, it might be a bug in the previous version of the driver.

  See this KB for more information

  http://Forum.Lenovo.com/T5/T400-T500-and-newer-T-series/T420s-screen-refresh-rate-drop-to-50Hz-when-...

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Expansion of the files is at 27% and then my screen turns off? : s

  Hi all, I read the other thread on this subject on the website, but as usual the problem I have is simply a little more boring, I would like to re-Morphix vista compeltely but in order to do so I obviously need to go through this process. As the title says, when he reached 27% on the expansion of the files after the first reboot, it goes no further, then after awhile my screen turns off. IM typing this text from my laptop at the moment in the hope that all of a sudden my screen will restart and it will continue, but I doubt it very much.

  I understand more information may be needed to help me then please just ask. Thank you.

  P.s. This problem during one accurs installation from the cd rather than boot. When I try to boot from the drive and runing installing it, my screen turns off agan normally just after entering the cdkey for vista.

  I have no idea why this is happening, but if I have the sort I would be very very happy :)

  EDIT: A little later and the screen is back on, sound saying "Please wait a moment while windows prepares to start for the first time" then after that, there are a lot of points and moe points keep coming (etc.) I hope it's a good thing: S

  Hello

  1. are you able to boot to the desktop now?
  2 How much RAM you have in your computer?

  If you are unable to boot to the desktop, then unplug all external devices and try to install windows again.

  If the installation fails again, then start in the system recovery options, and run the Windows memory diagnostic tool.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer DV7-1825dx laptop screen turns off at least connected to the HDMI

  I have a Pavilion dv7-1825dx running Windows Vista Home Premium 64-bit.  The other day, I simply closed the laptop into hibernation.  At the time, it was only connected to a printer and a wireless mouse.  The next day, I opened the laptop and it turned on but the screen stays off.  I shut down the computer by holding the power button and then turned back on.  The screen appeared and asked me if I wanted to start Windows normally.  Then, I got the loading screen for Windows.  As soon as he was done loading, the screen turns off and the chime sounded for the login screen.  I repeated again than having the same problem.  I typed my password, but the screen stays off.  Because I often hang my computer to our TV via HDMI, I thought I would try it, and that is, both screens lit.  I then disconnected the HDMI cable and the computer screen exploded again.  Plugged into the HDMI and activated.  I went into options for NVIDIA and noticed that there is an analog display with the screen of television and laptop (up to three screens on the list).  I restarted in safe mode, and the screen of the laptop works great.

  Any ideas on how to solve this problem?  That I can not connect my laptop to the TV whenever I want to use.

  Thank you advance!

  http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-285.62-WHQL-driver.html

  Save the driver on the desktop and install it from there, not in a temporary folder.

  Create a Windows restore point before starting.

  During the installation of the new driver, click on "Custom" and there will be a link to uninstall the old drivers and all of your current settings, this before you install the new driver.

• Prevents the screen turn off (locked)

  The screen turns off after a short period, as configured in the settings. But sometimes this must be disabled by software, for example the navigation software should not leave the screen get black. (BlackBerry Maps seem to handle this...)

  There are other situations where it might be a good idea to leave the screen in Active mode, perhaps the media players (watch the video) and so on.

  The page settings of the device even informs me in the operative part of security/password on the fact, that applications could extend the time until that the device will be locked with password.

  But I can't find any documentation on how the two that can be made from code.

  What permission is needed and I have to call?

  Hello

  Copy the following code prevents the lock screen:

  #include 
  ...
  Application::instance()->mainWindow()->setScreenIdleMode(ScreenIdleMode::KeepAwake);
  

• U2913WM screen turn off randomly

  So I got this monitor ultra wide nine of the store with 3 year warranty. I had these questions of the day 1. I came home to repair, but given that the problems occur at random I'm afraid that the retailer they come back to me it works normally after the test for 30 minutes.

  The questions are:

  1. the screen turns off (screen with backlight black still on) or it will freeze randomly. To resolve this issue, restart the controller using the power button, which in turn will not immediately respond, but will keep wait me for 6 to 10 seconds until the monitor turns off eventually. Monitor back to work normally after the restart until the next random freezing. Sometimes this happens when changing the resolution (for example launch a video game). This can happen as often as 5 - 10 times a day.

  2 monitor sometimes not into mode 'sleep' when the computer is off, put to sleep, or not used for a long time. Instead, the screen will turn white with the backlight, as in the previous edition, and the solution is the same - screen reboot. If this isn't the case, it will remain frozen, even if the computer is turned on or awakened.

  These produce both DP and DVI ports. My video card is Gigabyte GTX 670 2 GB. I don't have any of these problems with my previous screen using the same PC.

  I would appreciate a response to a Dell employee. Can it be fixed with a firmware update? The update can be done at home? I'm more or less a power user. If this isn't the case, I can get the monitor serviced by an authorized dealer (in Sofia, Bulgaria) with a cover letter or notification by email from Dell. Because as I said there is a good chance I will be denied a replacement of a work apparently monitor. Warranty service is not a strong point here, unfortunately.

  Can it be fixed with a firmware update?
  * Unknown. Try to test with DisplayPort 1.2 disabled on the OSD (On Screen Display)
  * Computer Gigabyte GTX 670 DP--> Dell DP to the CDM cable--> U2913WM CDM in
  * Support on the selection of input Source key
  * Put out Mini DisplayPort
  * Press and hold the green check mark for 8 seconds
  Disable the DisplayPort 1.2
  Out of the OSD

  The update can be done at home?
  * No. Pour get a monitor with the latest firmware, you must launch Dell monitor Exchange.

  If this isn't the case, I can get the monitor serviced by an authorized dealer (in Sofia, Bulgaria) with a cover letter or notification by email from Dell.
  * No. we do not repair the monitors on the ground, simply replace us them.

• Two problems that seem to be related. The screen turns off suddenly and reappears when the mouse is clicked. At the same time, the cursor insertion point disappears.

  The cursor disappears during the strike. It is blackened and cursor disappeared three times during the typing of this sentence. Very frustrating! I'm running Windows 7 Pro on a Dell Inspiron.

  Hi Ed,

  Thanks for posting your question in the Microsoft community.

  I understand that you have 2 problems on your Windows 7 computer.

  1. The screen turns off when you click with the mouse.
  2. The cursor on the screen disappears while typing.

  Let me know if this interpretation is erroneous. To better understand the issue, let me ask a few questions.

  1. What is the brand and model of the computer?
  2. You did changes to the computer before the show?

  I am here to help you and I suggest these methods to solve the problem.

  Method 1:

  Start the computer in safe mode and check if the same problems occur. Safe mode allows only a minimum set of services to load, this will help us to know if a service is causing the problem.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  If the problem does not occur in safe mode, and then perform a clean boot, this will turn off non-Microsoft services and therefore to determine if any non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.

  Method 3:

  The question could have occurred because the drivers on your computers are not updated. See the link, follow the steps and update the drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  View the status of the issue. If the problem persists then let know us, we will provide several methods.