Screen turns off when the Satellite A45-S250 is moved in the direction of less

Similar Questions

• Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

  When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

  Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.

• Laptop screen turns off but the system never sleeps when closed.

  Hello!

  I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

  Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

  Thank you!

  -S.

  Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

  If you have my problem and SRVNET is active, you will see this:

  SYSTEM:
  [DRIVER] \FileSystem\srvnet
  An active remote client recently sent requests for this machine.

  2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

  powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

  and for good measure (not sure if necessary but I did anyway)...
  
  powercfg - requestsoverride DRIVER "srvnet' system Awaymode

  3. once all is said and done, it should look like this after you run:

  powercfg - requestsoverride

  [DRIVER]
  \FileSystem\srvnet SYSTEM AWAYMODE
  srvnet SYSTEM AWAYMODE

  4 enjoy again the "sleep mode".

  Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

   

• Accelerometer turns off when the screen is off

  When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

  An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

  On Android, a partial wake lock is enough to keep the accelerometer running.

  I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

  Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

  The fix will appear in MR 10.2, 10.2.1 aka.

  I recently submitted a fix for the problem.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• computer won't goto sleep IE screen turns off but the hard drives will not be

  No matter what I put in power options, the computer won't go to sleep.

  The monitor turns off but the hard drives, fan to continue working.

  I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

  The computer turns off when the power off but sleep option does not work.

  Thanks for any help.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may be due to the following reasons:

  -The drivers are not updated.
  -Power option settings are incorrect.
  -The devices connected to the computer are preventing it from going into standby mode.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  https://Support2.Microsoft.com/kb/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Re: Satellite L300 - screen turn off when it will be moved

  I have a problem with my screen stopping when I move my laptop or move the screen slightly. The computer does not turn off just the screen becomes black. I have to then hold the power button to turn off the computer.

  Does anyone has any ideas or had this problem?

  Hi Geg,

  You may notice this behavior on external monitor too?

  For me, this looks like a hardware malfunction caused by internal display or just the cable. You should ask a technician for laptop help.

  If only the cable must be replaced cheap s and takes a few minutes a technician for laptop.

• Equium A100 - screen turns off when I open the lid completely

  I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off.

  However, when the half open, the screen is completely visible.

  I have attempted to open the screen and can not see loose cables to my knowledge.

  Any help on how to solve the problem would be appreciated.

  I agree with Akuma. It sounds like a hardware problem and probably the contact loses when you open the lid.
  The cable screen should be checked and probably replaced.

• Screen turns off when working DC but Portege R500 unpluge

  Hi forum.

  Just bought laptop Portege R500 PPR50E-04x048en.
  When I start the PC (BIOS is set to default) when using battery everything works fine.
  When I unplug the power cord, the screen turns off. I plug it back, the screen is still off!

  Any ideas?
  FN + F5 works, but does not help.
  FN + F1 don't see it's something.

  Great!
  Thanks for the comments.

• Latitude D610 screen turns off after the Windows XP loading screen

  I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?

  If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.

• Two questions. (1) RIP in media player 11 problems. (2) portable speakers do not turn off when the headset is plugged...

  Hey all. I desperately need help. I have a laptop "Durabook" with Windows XP meidand service pack 3 update.  The internal speakers have never turned off when I plug a headset or headphone cable of the adapter into the outlet. It is an option that I have figured out. All my other laptops have silenced the computer speakers when headphones are connected.

  The most frustrating problem I have is in Media Player when you use the tab OUT, when I insert a cd Ripper in the computer, it is not recognized.  If I close and reopen WMP (Windows Media Player) cd, the cover and all the info of the cd is here and ready to be torn APART. Once the cd ends and ejects I insert another cd and nothing happens. Once again, I've closed and reopened WMP and evrything is ready to be torn APART again.

  Please please help.  I can't be the only one who had this problem.  I removed all anti-virus programs, removed and reinstalled WMP, twice.

  I'd appreciate any help.

  Thank you all

  Carl aka theSTUNG1

  Hi Carl,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a parameter to extract music select "Always".
  a. open Windows Media Player 11.
  b. click Extract, click more options.
  c. click the rip music and make sure 'Always' is selection in accordance with article "Rip CD when inserted.
  d. click ok to apply the changes and restart the media player.
  e. check if the problem persists.

  See songs Rip (copy) from a CD to your computer

  Step 2: Make sure the headset is plugged into the socket on the right
  a. connect the headphones to the right sleeve and check the result.
  b. you can also right click on the volume icon and adjust the sound settings.

  See adjust the Volume of the computer

  Visit our Microsoft answers feedback Forum and let us know what you think.