screen/wake up the black screen unlocking

Similar Questions

• My 'to-do bar' (the black belt at the bottom of the screen) became really wide. Can't fix. Help me!

  All of a sudden my 'to-do bar' (the black band at the bottom of the screen) became really wide.  It was 1/2 inch (or 1 centi meters), but now almost 2 inches wide (or 5 hundred meters). She takes down 1/4 of the screen! I must have hit some button to cause this?   How to make the 'taskbar' how it was (to make it close)?  Please help me.  Thank you in advance.

  http://www.blurtit.com/q324464.html

  To make smaller or larger, you can place the mouse cursor on the top edge of the taskbar. Make sure that the taskbar is unlocked by right-clicking on the taskbar and if you deselect the option "lock the taskbar". This will allow the bar tasks to move freely. The mouse cursor will change to 2 arrow keys. Click and hold the left mouse button while on the 2 arrows keys and make the mouse upward or down to increase or decrease the size of the taskbar respectively.

  See you soon. Mick Murphy - Microsoft partner

• How do to wake up the second screen after computer fell asleep

  We have win 7 x 64 ultimate systems with two monitors in several floors in the building.

  We often spend the system sleep when we go to meetings. When we return, we wake up the system, but only the #1 screen is active, and #2 display will be black. We can only get display #2 will be active, after that shut down the system and boot the system again.

  These systems were under Vista before and double active poster awake after sleep.

  What can we do to create the active #2 display?

  Boring, but it worked for me...

  1. Device Manager > graphics cards
  2. Disable all video cards
  3. Turn on all video cards

• Wake up the screen on the Crown of the Apple Watch Series 2 is not displayed

  Watch app (iPhone 7 iOs 10) not the screen showing wake on the Crown of the Apple Watch Series 2 (look at OS 3)!

  What's wrong?

  Thank you

  Hello

  If you want to organize the presentation of the application on your Apple Watch using the app shows:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > presentation of the App.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• My I phone screen see the black with a command like a dos {nand} system...

  My I phone screen see the black with a command like a dos {nand} system...

  Your phone has a serious problem. You can try to reboot (hold home and power at the same time for about 10-30 seconds buttons), but if that does not work, your hardware is probably fried. Make an appointment at your nearest Apple Store Genius Bar for confirmation.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Satellite L500-1DT - strip down side of the black screen

  My laptop screen has gone all weird, help! The display seems to have shifted. I have updated all drivers display, made the restoration of the system, checked other ideas screen resolution?

  The start bar is below the edge of the screen and there is a black stripe on the side where the mouse pointer disappears.

  When I "Print screen" he normally does and has shown the start bar and not the black band.
  Photo
  http://farm6.static.Flickr.com/5230/5549191903_08ef005c10_b.jpg

  Post edited by: starpoi

  Hello

  I can see the photo t, I get the message that this photo is currently unavailable.

  Anyway, do you see the same behavior on external monitor?

• HP envy: stuck on the black screen

  Hello, so my Hp Envy is stuck on a black screen. It's a screen lit, but it does not load windows. I tried a hard reboot, nothing. I've updated the BIOS and it seemed that nothing was happening then loaded windows. My antivirus has been turned off and need to restart the computer now its stuck on the black screen turned on again. Help, please!

  Hi @Jaxibrey,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your HP ENVY laptop and having starting problems.  Try to make a hard reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to put the laptop in Safe Mode. Then you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop. You may need to consider a few days before that the issue that has happened.

  Here is a link to computer does not start for Windows.

  Plug the adapter directly into a different wall socket. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Please let me know how it goes.

  By clicking on the Thumbs Up below, you can say thank you! .

  Thank you.

• When I was playing the game and my 3D PC show the black screen and the sound of noise.

  Hi Admin,
  When I was playing the game and my 3D PC show the black screen and the sound of noise. And then I can't move anything and I can restart only. What is this problem? I don't know why? Please help me what should I do.
  My PC specs are as follows

  Aspire M5800 (Q84MR375) Genuine Windows Vista® Home Premium, 64-bit, Intel Core 2 Quad processor Q8400 (2.66 GHz, 4 MB L2 Cache, bus front at 1333 MHz), 3 GB Ram, 750 GB S - ATA HDD, DVD SuperMulti Double Layer drive, Nvidia GeForce GT220 graphics (1 GB dedicated RAM) card, Wireless LAN, keyboard and wireless mouse with LCD 23 '' monitor.

  phoechan,
  More than likely if this started after you upgrade to Windows7 then you might have to update your hardware drivers.  Go to the websites of the manufacturers of hardware for your PC and get all the latest drivers for Windows 7 (video, sound, chipset, etc...).  If they don't have Windows 7 drivers you may have questions until they create them.  You can also try to boot your PC and also right click on the game .exe file and change the compatibility mode to Vista or XP.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there. How can I automatically have the black screen disappear.

  I wrote a batch file in Notepad using win XP, it works, but when you are finished, the black screen is still there.    How can I automatically have the black screen disappear.

  Hello

  Use it as the last command in the file beats.

  OUTPUT

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• ACPI.sys corrupted at startup disk on the black screen windows

  When I start my computer normally all I get is a black screen with my cursor on it before I reach the log on screen (but after normal of the windows startup process).  I tried Ctrl alt del and nothing happens, there is no beep or anything along those lines is.  I tried safe mode, but exactly the same thing happens, I get a black screen with white inscription around the edges, telling me that I'm in safe mode and my slider is still there and moves, but other then that is all black screen.  Ctrl alt delete doesn't work or any other key press on that I skipped.  I put in my windows XP CD and he would try to repair or reinstall the operating system but when I boot on the CD, it starts to load normally and then stops and gives me the error message "the acpi.sys file is corrupted.  Press a key to continue' when I press any button it goes upwards and brings back me to the black screen with the cursor.  I tried to go into the BIOS and turn off acpi but the loading and the startup disk produce the exact same results any bios settings I try.  Any help would be appreciated, either for obtaining windows at startup after the black screen without the startup disk or get me to the point where I can still use the CD (which I should mention that I have used before and it worked well, is the one responsible for my windows XP in the first place and who is clean and scratch free).  Thank you for any help or advice.  Oh, and I must add that I have installed any new software or whatever it is like in the last month or two, so I don't think it is something like that.

  Hello usernamerandom,

  Take a look at the sticky thread depending on which was released 21:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/why-do-i-have-a-black-screen-when-i-start-Windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82

  Best regards

  Matthew_Ha

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• HP pavilion g6 stuck on the black screen with cursor 8 windows

  Hello.

  I used windows 8 perfectly... but today when I rebooted my laptop I don't have the 'Press esc to access the configuration menu"and once loaded in the windows icon. It got stuck on the black screen...

  Any ideas or suggestions? How can we get? Icannot go to the start menu cannot load the... Task Manager what can I do? Also the battery also affects bones

  "It was a moment cartoonic, when gravity stops for coyote to make him realize that he was wrong from the beginning."

  Hi, I did a hard job looking for a solution, and after a while, I found a solution. The solution to the problem was a little easy, but at the same time a bit funny too, hehehe.

  The solution was, when I removed the battery, then did what you told me, I even! Even the black of the same screen cursor. Then I tried power the computer nothing do but simply by pressing the power button without the battery in it. The laptop ran using cable ca, and then I was able to use the windows. Its perfect work. Now I have piles in too and its still in good condition.

  Now what do me? Should I replace the battery, I get error 601 (main battery) too. So should I replace it with a new one? I hope that it will be more preferable.