Screensaver reappear even with the power set to NEVER

Similar Questions

• My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

  I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I have a G61 that won't start with the power adapter in, is this normal?

  My CA G61 - 320 will not start.  With the battery and the power adapter in, front power light blink 3 times.  With and without battery power adapter only, there is no lights at all and computer remains off.  Should not the computer always start and run with the power adapter even if the battery is dead?

  Have you tried with another plugged AC adapter and remove the battery?

  Kind regards
  ERICO

• Wheel rotation, even with the new SSD

  Hi all

  I have a mid-2012 Macbook Pro unibody (2.9 Ghz, Intel Core i7, 8 GB of DDR3, Intel HD 4000 1536 MB graphics card memory) running OSX El Capitan 10.11.6. Stock HARD drive used to run very slowly with the wheel that turns all the time, replace with a Sandisk 240 GB SSD drive recently. It's still at the spinning wheel, colorful, even with the finder. I have still 220 GB unused space.

  Please help me identify the problem to solve this issue. I thank in advance for the support.

  Download this and run a report, post it here when it is complete.

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• New computer, put a password on my account, but don't remember the password even with the trick, I'm the owner and administrator of the computer

  new to computer.put a password on my account don't you remember the password even with the owner of suspicion of computer im also the u only administor.thank

  * original title - activate my password account.changed newspaper even cant account with suspicion am owner have only n *.

  Hi Michelle,

  You can read the following article and check.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  Please see the following articles for more information:

  Microsoft's strategy concerning lost or forgotten passwords

  Keep secure passwords - Microsoft strategy on move the passwords

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.