Screenshot VI works fine with Labview 9 but crushes with Labview 10
Hello world
I'm using Labview 10 with XP.
Screenshot VI (available in the .zip in this discussion http://forums.ni.com/t5/LabVIEW/Can-i-make-an-automatic-Print-screen-in-labview/td-p/534790/page/2?q... works very well with Labview 9 but makes Labview 10 crush every time (same computer).)
Any solution to make it work with Labview 10?
Thank you
User
Hello
Thanks for posting on the forum of NOR.
You can find an answer at the end of the same link you post (page 4).
Kind regards
Tags: NI Software
Similar Questions
-
How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3. I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1. Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS. Any suggestions, much appreciated.
-
after update to XP media center units Vista remote control
Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista. I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it. Handset was working fine a few days ago. I also went in 'Administrator', 'services' and then active HID, but it still does not work. Media works well, but it would be nice to have the operation of the remote control! Not particularly computer, simply suggestions please! Thank you, Nick.Hi Nicolas,
I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.
For more information, you can check the link below,
-
iMac works fine with safe mode only
iMac works fine in safe mode, but in normal mode, it freezes constantly, the wheel that turns, the freezing of the apps, and when I try to restart, it gets stuck. I have to hard reboot. I tried to reinstall the operating system, which did not help. I have reset the NVRAM, but it has not solved the problem. I came across another post in 2013, with another user who was having a similar problem. There are detailed instructions to run diagnostic tests via terminal and display the results. This seemed to fix the problems of the user, but I don't know what to do with the information it generates. I have an iMac 2009 El Capitan 10.6.11 running. Can someone help me understand what the problem is?
Post edited by: Namaste85
If you have any type of antivirus, cleaning or ANY other third party maintenance application installed, please find the developers instructions and uninstall. At best, these types of applications are 100% useless and at worst they cause more harm (similar to what you are experiencing) than good.
If you don't have one of these types of applications installed, run a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.
If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.
-
I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect. It worked fine with the previous modem (a rented one TWC). Help!
Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.
Turn off the new modem for at least 30 minutes. More is better.
Perform a hard reset on the AirPort Extreme, then it turned off.
Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port
After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.
Then, turn on the airport and let it run a few minutes
Set up AirPort Extreme again
Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.
-
I have a hero go pro 4 and it worked fine a month ago but now my footage is ignored.
I have an end 15 in 2011 macbook pro 2.2 GHz Intel Core i7, AMD Radeon HD 6750 M 512 MB, 4 GB 1333 MHz DDR3. I have a hero go pro 4 and it worked fine a month ago but now my footage is ignored. Can anyone help? Do you think that its to do with the GHz? or do you think I have some bugs? because it worked a month or two ago? very frustrating. Don't want to spend more money on a new mac when the one I have is perfect whether this problem.
Your profile is correct for your MBP runs 10.7.2?
What updates have applied recently?
Please download and install EtreCheck from http://etrecheck.com/
Run it and post the report here.
-
LifeCam HD-5000 works fine in other programs, but not in the Lifecam software accompanying
My Lifecam HD-5000 works fine in other programs, but not in the Lifecam software that comes with it, I get "There is no camera connected to this computer." I tried to restart and uninstall then reinstall the software.
Hello
LifeCam HD-5000 - Support and warranty (3 years)
http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-5000/7ND-00001#supportMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxSupport for WebCam
http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
http://www.Microsoft.com/hardware/en-us/supportProduct Solution Center
http://support.Microsoft.com/hardwareMS material takes in charge and recourse in warranty (90 days support of)
the date of the 1st call).1-800-936-5700 or 1-800 Microsoft (642-7676)
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My app works fine on the Simulator, but no devices make null pointer exception
my application works fine on the Simulator, but when I try to run on the device its getting null pointer exception
I have also to debug the code and found that none of the allocated objects. Not a memory allocate unique.
For example I allcated String object in constructor
Dim myString As String = new String ("my String");
But its not allocated and even I put permissions
Please help me
I was getting exception somewhere
-
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well. -
my printer worked fine in the past, but now when I try to print, it says document is in Quebec, but it is offline. What's wrong?
dougnatz,
Try to run delete print jobs to remove all blocked the queue print jobs.
Rick
-
Since the upgrade to Lightroom vs 7.1 5 I'm more able to import my photos. All this worked fine with my previous version. I use ios on a MacBook Air. Any ideas?
This means that you don't have the WRITE permission to the folder where you try to copy the photos to. Determine so, you try to copy photos in the folder (this is in the dialog box import on the right to the title of the Destination), then go in your operating system and change the permissions on this folder SPECIFIC to WRITE permission.
-
my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?
No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.
-
Since I updated Firefox I can't play anything that requires Flash player. I have the reader up-to-date and it works perfectly with IE, but Firefox always tells me that I need another plugin and when I followed the instructions, it says "failed download try manual download" but even that fails too.
Before I updated Firefox I had no problem, can you help me
Alan.al55:
Using Windows 7 64-bit or 32 - bit OS?
- How to determine for Windows 7 and Vista: http://support.microsoft.com/kb/827218#WinVista7
Firefox is a 32-bit application. Try to (1) download the 32-bit Setup program, save it to your hard drive, (2) close all browsers, (3) run the program installation and (4) test.
- 32-bit direct link manual installer at Adobe: download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe
After installation
- use Firefox to access this link to test: https://www.adobe.com/software/flash/about/
- then use IE to go to the same link to test
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
I have a printer HP 8600 pro works great with my computer Windows 7 & computer laptop, but not with my laptop Windows 8.1. When I tried to print wireless (I didn't try connected), it would print only the first pages of 2 or 3 of everything I tried to print. I uninstalled the printer and inserted the CD to try to re - install and I got an error message indicating that the printer does not work with my operating system. I was able to install it earlier, but now, it will not install at all.
Too bad. I'm sorry. I'm went to the HP Support Web site & downloaded a new driver & now it works!
-
I have a hp3510 wireless printer which worked well with my i - pad and on my laptop when 1st installed. now it will only print blank with the i - pad pages, even if it still works fine when using my laptop configured xp. can someone tell me how to fix the problem of the i - pad, so that I can print wireless using this device?
Thank you!
I begin with the tension of the Apple device, make sure that you hold the power button down and drag the bar on the screen on 'Off '. If you have more than 1 iOS device that you use with the current of the printer (like an iPad or iPhone) them down at the same time. Then reactivate them all and try to print to the printer.
If still a problem, I would then turn off the printer, router and device from Apple.
1. unplug the router, (most do not have a power button)
2. turn off printer and Apple device
3 wait about 20-30 seconds
4 plug router back in and wait for it to be fully operational and all the light on it again as they were before unplugging.
5 printer and apple pyromecanismes turn on (check the settings of the iPad to make sure he's still on the same network as the printer and "ask to join other networks" is enabled).
6 try to print
Maybe you are looking for
-
Changed DST time but keeps randomly return return
ON my and my husband iPhones (a 6s and 6 sec more) time changed correctly for DST but keeps returning random (back). iOS is updated. We restarted our phones. Anyone else having this problem? I know we can set the time manually, but it would be so mu
-
Toshiba power saver crash on Satellite A60
Hello I have a Satellite A60-297ITA bought with XP Home.Now, I bought a XP Pro and I install reformat all the laptop.Then I installed all the drivers downloaded from your site.The Installation of pwrsav-sp-a60-xp-70302-en.zip seems to work very well,
-
Error code 5005 Keithley 2602 not detected
Hello I use the Keithley 2602 A meter/source in labVIEW2011. An error code 5005 product (wholesale value) on the display. This error is not detected by the driver. In the pilot of the world ErrorQuery maintains False even if an error occurs. If I put
-
Original title: the remote Sessions. When you install updates security directly on a particular server or change the registry, how is it that change is not displayed when you establish a remote session on this server to another server? My agency uses
-
"ITS creation failed" problem for IPSec VPN
An ASA 5100 is used to provide VPN access for my business. The configuration was made by a permeable man who has been missing for some time, and the configuration used to be OK until this morning. This morning, some users reported that their VPN woul