Script to check the speed and duplex

Similar Questions

• EA6500 manually select the speed and duplex to WAN port

  Is it possible (settings hidden?) to manually set speed or duplex in port WAN EA6500? I use EA6500 with Genexis HRG1044 (FTTH) and the latter has known issues with the download speed when local is connected to gigabit. It seems that the EA6500 and the HRG1044 Genexis do support auto-negotiation and who always results in gigabit which translates the poor in upload on the internet. Switch from 100 Mbps between EA6500 and Genexis HRG1044 does the trick, but I was wondering if it can be done without it. BTW, my internet speed is only 100 / 100 Mbit/s in any case.

  You can't adjust the WAN speed on the EA6500 with the Linksys firmware. The only solution is to put a switch 10/100 between the modem and the router.

• Change the speed and Duplex setting in the guest OS

  I have not chnaged it auto-negotiation on any of our virtual machines. I would assume forcing to 1000/FULL would work fine but, because it is actually connected to a vSwitch, I also don't think that anything could be gained.

  Someone at - it closer look which could provide insight or performance comparisons? Other advantages/disadvantages?

  Have you seen this discussion?

• Check the resolution and write in CSV

  I need a script that checks the resolution of an image and if the resolution is less than 300, it must create a CSV/text file in desktop with the string "the resolution is less than 300. Is it possible to do using script? Please advise.

  Audit of the resolution should not be difficult.

  var theRes = app.activeDocument.resolution;
  if (theRes < 300) {/*insert code here*/};
  

  This could be used to write a txt file, but there are probably other examples on this Forum and http://ps-scripts.com/bb/

  ////// function to write a preference-file storing a text //////
  function writePref (theText, thePath) {
    try {
      var thePrefFile = new File(thePath);
      thePrefFile.open("w");
      for (var m = 0; m < theText.length; m ++) {
        thePrefFile.write(theText[m])
        };
      thePrefFile.close()
      }
    catch (e) {};
    };
  

• How to get the speed and the influence of the keyframe?

  Hello world

  I'm sorry if my question is due lack of understanding of script in AE but I can't seem to get the speed and influence the properties of selected or closest to the keyframe, I found that the ways to implement.

  Can someone tell me please in the right direction?

  Thank you!

  property.keyInTemporalEase (key) and property.keyOutTemporalEase (key) will give you the objects made easy with speed and influence the attributes for a particular key.

  Dan

• Using Script to check the version of Adobe Reader software

  Hello. I am now currently using LiveCycle Designer to create a form that allows users to attach attachments. We found that if a user uses Adobe Reader 7.0 or below, there is a problem on fixing attachments. Accordingly, we would like to add a script to check the version of the Adobe Reader client in a ready state of the form. If a user uses Adobe 7.0 or below, the message box opens and suggests the user to download a more recent version of the Adobe Reader software. I would like to know is possible to do so. Thank you very much

  Hello

  the script might look like:

  If (typeof (app.viewerVersion)! = "undefined")

  If (app.viewerVersion<>

  {

  xfa.host.messageBox ("your Version of Adobe Reader is old...");

  }

  }

  You can use it in the docReady:Event of your form to inform users.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• Since I updated Firefox a week ago, my screen saver does not work. I checked the settings and they are still just as I would like.

  My screensaver is scheduled to start after 15 minutes. I checked the preview and it works. However, it does not start after hours of inactivity. What has changed?

  I don't think that Firefox has hooks that would prevent the screensaver from starting.
  It may not be compatible with the latest version of Firefox.
  Please try a different screen saver. I use Digital Aquarium Screensaver and it works well.

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• I want to control the speed and direction of a motor continuous using labview with pwm

  I want to control the speed and direction of a motor (essentially a toy motor) continuous generating a PWM signal in labview. I'm using L293d motor and exit DAQ-9472. Can I do this without the help of any microcontroller but only a simple labview code and the DAQ 9472 output

  There are many examples on how to generate a PWM on one in the buffer, or on a counter, but that does not support this card.  A 8 a cDAQ chassis also a BNC connector that can be used as a counter as well.  These examples can be found in help > example Finder in LabVIEW.

  Also be aware of your current limiting.  This card can drive a decent amount of current, but it has its limits.  You'll want to put an inline meter to see what is current and see how far you get to it.

• I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green.

  I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom?

  original title: IPConfig and lack of internet access

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers.
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  =========================  IpConfig ===========================

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• Why is always faster download speed when I check the speed u switch broadband compared with BT Speedtest?

  Broad speed band

  Hello. Why is always faster download speed when I check the speed u switch broadband compared with BT Speedtest? My ISP is BT. Thank you. Brian

  Hi Brian,.
  I recommend you to get in touch with the Internet Service Provider (ISP) for more information on this issue, because the Internet speed depends on their service.

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray