Script to create the folder on the physical disk and not in the package

Hello-

Attached is a script that I have which will create a folder on the C:\ inside the bubble.  What I need, it's so he can create a folder on the physical disk and not inside the bubble.  Can someone tell me what I did wrong here?  I have a similar script which creates a folder on the D drive for the linked clones and it works fine.  Thanks in advance!

Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.

With the help of isolation have merged, the application can read/write file on the physical machine.

Tags: VMware

Similar Questions

  • I have to install just Adobe presenter of this entire application. I created the package using AAMEE3.1

    I created the package using JOHN 3.1, using the source of Adobe eLearning Suite 6.1.

    During the creation of a Package I selected only Adobe Presenter 8. The package is serialized and also Adobe ID is here to connect. The package is created successfully. But when I run MSI it restorations during the Installation.

    Here is the PDApp.log file:

    15/07/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:07:21 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:07:21 [INFO] DeploymentManager - runs the deferred custom action.

    15/07/2013 09:07:21 [INFO] DeploymentManager - obtained the following as CustomActionData

    15/07/2013 09:07:21 [INFO] DeploymentManager - mode = install; sourceDir = c:\Nouveau (2) folder \Adobe presenter 8\Build\. installDir =; origDB = folder (2) c:\Nouveau \Adobe 8\Build\Adobe presenter presenter 8. MSI

    15/07/2013 09:07:21 [INFO] DeploymentManager - mode = install; sourceDir = c:\Nouveau (2) folder \Adobe presenter 8\Build\. installDir =; origDB = folder (2) c:\Nouveau \Adobe 8\Build\Adobe presenter presenter 8. MSI

    15/07/2013 09:07:21 [INFO] DeploymentManager - original database path: C:\New folder (2) \Adobe 8\Build\Adobe host presenter 8. MSI

    {15/07/2013 09:07:21 [INFO] DeploymentManager - OptionXML saved to the location: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{9CB14C72-1E7 1-49 C 0 - A7D8 - 559F1DC35661}

    15/07/2013 09:07:21 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:07:21 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:07:21 [INFO] DeploymentManager - initialization of the Custom Action parameters data

    15/07/2013 09:07:21 [INFO] utility - file does not exist

    15/07/2013 09:07:21 [INFO] DeploymentManager - commissioning tool path is (D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8 D6-4870-AA90-9626C4D6D4E2}).

    15/07/2013 09:07:21 [INFO] DeploymentManager - begins to run the custom action to install mode

    15/07/2013 09:07:21 [INFO] DeploymentManager - STEP 1: start to parse the XML Option.

    {15/07/2013 09:07:21 [INFO] DeploymentManager - deployment XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{709B4BF9-4A0 5-4D3E-BC48-850DE16D5A85}

    15/07/2013 09:07:21 [INFO] DeploymentManager - Deployment Manager runs in Install Mode.

    15/07/2013 09:07:21 [INFO] DeploymentManager - relative path to Self-Update the bootstrapper does not exist.

    {15/07/2013 09:07:21 [INFO] DeploymentManager - substitute XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{61E5FBB2-8F4 C-4909-9A3F-823EC1DE99F5}

    15/07/2013 09:07:21 [INFO] DeploymentManager - no updates found (0).

    15/07/2013 09:07:21 [INFO] DeploymentManager - STEP 2: from launch media program boot.

    15/07/2013 09:07:21 [INFO] DeploymentManager - bootstrapper launch location is: C:\New folder (2) \Adobe presenter 8\Build\Setup\Set-up.dat

    15/07/2013 09:07:22 [INFO] installation - build Version - 6.2.136.0

    15/07/2013 09:07:22 [INFO] installation - verbosity Logging Level Set of 4

    15/07/2013 09:07:22 [INFO] installation - start the installation of Adobe

    15/07/2013 09:07:22 [INFO] installation - TimeLog: start-up of the bootstrapper

    15/07/2013 09:07:22 [INFO] installation - TimeLog: begin the initial checks

    15/07/2013 09:07:22 [INFO] installation - specified Action - "install".

    15/07/2013 09:07:22 [ERROR] installation - error analysis of the arguments of the command line to the - 'DISABLE_CCM_DESKTOPSHORTCUT '.

    The expected arguments are-

    -mode = silent

    -overrideFile = '< FilePath > ".

    15/07/2013 09:07:22 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\resources\setup.xml

    15/07/2013 09:07:22 [INFO] PIM - XML is valid

    15/07/2013 09:07:22 [WARN] PIM - could not find node

    15/07/2013 09:07:22 [INFO] installation - found 7 packages in install manifest

    15/07/2013 09:07:23 [INFO] utility - semaphore is not locked

    15/07/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:07:23 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:07:23 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:07:23 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:07:23 [INFO] utility - the file does not exist

    15/07/2013 09:07:23 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:07:23 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:07:23 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:07:23 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:07:23 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:07:23 [INFO] PIM - Updater inventory location: c:\Nouveau file (2) \Adobe presenter 8\Build\Setup\resources\updaterinventory.dll

    15/07/2013 09:07:23 [INFO] PIM - system locking ACF acquired level...

    15/07/2013 09:07:23 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:23 [INFO] PIM - XML is valid

    15/07/2013 09:07:23 [WARN] PIM - cannot find the node

    15/07/2013 09:07:23 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:07:24 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:24 [INFO] PIM - XML is valid

    15/07/2013 09:07:24 [WARN] PIM - could not find node

    15/07/2013 09:07:24 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:07:25 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:25 [INFO] PIM - XML is valid

    15/07/2013 09:07:25 [WARN] PIM - could not find node

    15/07/2013 09:07:25 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:07:27 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:07:27 [INFO] PIM - XML is valid

    15/07/2013 09:07:27 [WARN] PIM - could not find node

    15/07/2013 09:07:27 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:07:28 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:07:29 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:07:29 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize... 29928536

    15/07/2013 09:07:29 [INFO] installation - TimeLog: complete the initial audits

    15/07/2013 09:07:29 [INFO] installation - TimeLog: start the installation

    15/07/2013 09:07:29 [INFO] C:\New - Start by installing the package kernel - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx

    15/07/2013 09:07:29 [INFO] PIM - XML is valid

    15/07/2013 09:07:29 [WARN] PIM - cannot find the node

    15/07/2013 09:07:29 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx.

    15/07/2013 09:07:29 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pima.

    15/07/2013 09:07:29 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:07:29 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:31 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:31 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:32 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:32 [WARN] PIM - could not find node

    15/07/2013 09:07:32 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:32 [INFO] PIM - created backup file

    15/07/2013 09:07:34 [INFO] utility - the file does not exist

    15/07/2013 09:07:37 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx.

    15/07/2013 09:07:38 [INFO] C:\New Setup - finished installing the kernel package - file (2) \Adobe presenter 8\Build\Setup\packages\core\PDApp.pimx, status code returned: 0

    15/07/2013 09:07:38 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:38 [INFO] PIM - XML is valid

    15/07/2013 09:07:38 [WARN] PIM - cannot find the node

    15/07/2013 09:07:38 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx.

    15/07/2013 09:07:38 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pima.

    15/07/2013 09:07:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:07:39 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:39 [INFO] PIM - created backup file

    15/07/2013 09:07:39 [INFO] utility - the file does not exist

    15/07/2013 09:07:42 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx.

    15/07/2013 09:07:42 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\D6\D6.pimx

    15/07/2013 09:07:42 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:42 [INFO] PIM - XML is valid

    15/07/2013 09:07:42 [WARN] PIM - cannot find the node

    15/07/2013 09:07:42 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx.

    15/07/2013 09:07:42 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pima.

    15/07/2013 09:07:42 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:07:42 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:43 [WARN] PIM - could not find node

    15/07/2013 09:07:43 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:43 [INFO] PIM - created backup file

    15/07/2013 09:07:45 [INFO] utility - the file does not exist

    15/07/2013 09:07:47 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx.

    15/07/2013 09:07:48 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\DECore\DECore.pimx

    15/07/2013 09:07:48 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:48 [INFO] PIM - XML is valid

    15/07/2013 09:07:48 [WARN] PIM - cannot find the node

    15/07/2013 09:07:48 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx.

    15/07/2013 09:07:48 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pima.

    15/07/2013 09:07:48 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:07:48 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:48 [INFO] PIM - created backup file

    15/07/2013 09:07:49 [INFO] utility - the file does not exist

    15/07/2013 09:07:53 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx.

    15/07/2013 09:07:53 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\DWA\DWA.pimx

    15/07/2013 09:07:53 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:07:53 [INFO] PIM - XML is valid

    15/07/2013 09:07:53 [WARN] PIM - cannot find the node

    15/07/2013 09:07:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx.

    15/07/2013 09:07:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pima.

    15/07/2013 09:07:53 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:07:53 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:07:54 [INFO] PIM - created backup file

    15/07/2013 09:07:59 [INFO] utility - the file does not exist

    15/07/2013 09:08:04 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx.

    15/07/2013 09:08:04 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\P6\P6.pimx

    15/07/2013 09:08:04 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:04 [INFO] PIM - XML is valid

    15/07/2013 09:08:04 [WARN] PIM - could not find node

    15/07/2013 09:08:04 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx.

    15/07/2013 09:08:04 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pima.

    15/07/2013 09:08:04 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:08:04 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:05 [INFO] PIM - created backup file

    15/07/2013 09:08:09 [INFO] utility - the file does not exist

    15/07/2013 09:08:18 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx.

    15/07/2013 09:08:18 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\LWA\LWA.pimx

    15/07/2013 09:08:18 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:18 [INFO] PIM - XML is valid

    15/07/2013 09:08:18 [WARN] PIM - could not find node

    15/07/2013 09:08:18 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx.

    15/07/2013 09:08:19 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pima.

    15/07/2013 09:08:19 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:08:19 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:20 [INFO] PIM - created backup file

    15/07/2013 09:08:21 [INFO] utility - the file does not exist

    15/07/2013 09:08:27 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx.

    15/07/2013 09:08:27 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\UWA\UWA.pimx

    15/07/2013 09:08:27 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:27 [INFO] PIM - XML is valid

    15/07/2013 09:08:27 [WARN] PIM - could not find node

    15/07/2013 09:08:27 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx.

    15/07/2013 09:08:27 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pima.

    15/07/2013 09:08:28 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:08:28 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:28 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:28 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:29 [INFO] PIM - created backup file

    15/07/2013 09:08:29 [INFO] utility - the file does not exist

    15/07/2013 09:08:33 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - registry = true - createShortcut = true

    15/07/2013 09:08:33 [INFO] utility - success of CreateProcess

    15/07/2013 09:08:35 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:08:35 [INFO] PIM - executed correctly install modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:08:35 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx.

    15/07/2013 09:08:35 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\Setup\packages\CCM\CCM.pimx

    15/07/2013 09:08:35 [INFO] PIM - treatment... _pimCreateOrUpdateAAMInventory

    15/07/2013 09:08:36 [INFO] PIM - inventory already present on the machine...

    15/07/2013 09:08:36 [INFO] installation - TimeLog: installation of the end Lance PDApp.

    15/07/2013 09:08:37 [INFO] installation - path of deployment file not specified in command-line arguments. Skip the deployment of payload part

    15/07/2013 09:08:37 [INFO] installation - = end of Adobe installer. Exit code: 0 =.

    15/07/2013 09:08:37 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:08:37 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:08:37 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:08:37 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] DeploymentManager - the code returned by the boot process is (0).

    15/07/2013 09:08:37 [INFO] DeploymentManager - STEP 3: from throw ASU AAM.

    15/07/2013 09:08:37 [INFO] DeploymentManager - bootstrapper launch location is: C:\New folder (2) \Adobe presenter 8\Build\ASU\Set-up.dat

    15/07/2013 09:08:37 [INFO] installation - build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] installation - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] installation - start the installation of Adobe

    15/07/2013 09:08:37 [INFO] installation - TimeLog: start-up of the bootstrapper

    15/07/2013 09:08:37 [INFO] installation - TimeLog: begin the initial checks

    15/07/2013 09:08:37 [INFO] installation - specified Action - "install".

    15/07/2013 09:08:37 [ERROR] installation - error analysis of the arguments of the command line to the - 'DISABLE_CCM_DESKTOPSHORTCUT '.

    The expected arguments are-

    -mode = silent

    -overrideFile = '< FilePath > ".

    15/07/2013 09:08:37 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\resources\setup.xml

    15/07/2013 09:08:37 [INFO] PIM - XML is valid

    15/07/2013 09:08:37 [WARN] PIM - cannot find the node

    15/07/2013 09:08:37 [INFO] installation - found 7 packages in install manifest

    15/07/2013 09:08:37 [INFO] utility - semaphore is not locked

    15/07/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:37 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:08:37 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:08:37 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:08:37 [INFO] utility - the file does not exist

    15/07/2013 09:08:38 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:08:38 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:08:38 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:08:38 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:08:38 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:08:38 [INFO] PIM - Updater inventory location: c:\Nouveau file (2) \Adobe presenter 8\Build\ASU\resources\updaterinventory.dll

    15/07/2013 09:08:38 [INFO] PIM - system locking ACF acquired level...

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:38 [INFO] PIM - XML is valid

    15/07/2013 09:08:38 [WARN] PIM - cannot find the node

    15/07/2013 09:08:38 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:08:38 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:08:39 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize... 29928536

    15/07/2013 09:08:39 [INFO] installation - TimeLog: complete the initial audits

    15/07/2013 09:08:39 [INFO] installation - TimeLog: start the installation

    15/07/2013 09:08:39 [INFO] C:\New - Start by installing the package kernel - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx

    15/07/2013 09:08:39 [INFO] PIM - XML is valid

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx.

    15/07/2013 09:08:39 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pima.

    15/07/2013 09:08:39 [INFO] PIM - Package id 5AA1D762-31AF-4FC3-A0C0-66BF663B2117 is already installed

    15/07/2013 09:08:39 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:39 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:39 [WARN] PIM - cannot find the node

    15/07/2013 09:08:39 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:40 [INFO] PIM - created backup file

    15/07/2013 09:08:41 [INFO] utility - the file does not exist

    15/07/2013 09:08:45 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx.

    15/07/2013 09:08:45 [INFO] C:\New Setup - finished installing the kernel package - file (2) \Adobe presenter 8\Build\ASU\packages\core\PDApp.pimx, status code returned: 0

    15/07/2013 09:08:45 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:45 [INFO] PIM - XML is valid

    15/07/2013 09:08:45 [WARN] PIM - could not find node

    15/07/2013 09:08:45 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx.

    15/07/2013 09:08:45 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pima.

    15/07/2013 09:08:45 [INFO] PIM - Package id 54FD72DC-72EC-4CDC-8828-F07C4E9E6FA2 is already installed

    15/07/2013 09:08:45 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:45 [INFO] PIM - created backup file

    15/07/2013 09:08:46 [INFO] utility - the file does not exist

    15/07/2013 09:08:49 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx.

    15/07/2013 09:08:49 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\D6\D6.pimx

    15/07/2013 09:08:49 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:49 [INFO] PIM - XML is valid

    15/07/2013 09:08:49 [WARN] PIM - cannot find the node

    15/07/2013 09:08:49 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx.

    15/07/2013 09:08:49 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pima.

    15/07/2013 09:08:49 [INFO] PIM - Package id 6D2A548B-C50D-46BA-B83E-C8199C6A9406 is already installed

    15/07/2013 09:08:49 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:49 [WARN] PIM - cannot find the node

    15/07/2013 09:08:49 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:49 [INFO] PIM - created backup file

    15/07/2013 09:08:51 [INFO] utility - the file does not exist

    15/07/2013 09:08:53 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx.

    15/07/2013 09:08:53 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\DECore\DECore.pimx

    15/07/2013 09:08:53 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:53 [INFO] PIM - XML is valid

    15/07/2013 09:08:53 [WARN] PIM - cannot find the node

    15/07/2013 09:08:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx.

    15/07/2013 09:08:53 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pima.

    15/07/2013 09:08:55 [INFO] PIM - Package id 99477136-88AD-496B-9551-BAE72699A32C is already installed

    15/07/2013 09:08:55 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:55 [INFO] PIM - created backup file

    15/07/2013 09:08:55 [INFO] utility - the file does not exist

    15/07/2013 09:08:58 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx.

    15/07/2013 09:08:58 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\DWA\DWA.pimx

    15/07/2013 09:08:58 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:08:58 [INFO] PIM - XML is valid

    15/07/2013 09:08:58 [REPORT] PIM - cannot find the node

    15/07/2013 09:08:58 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx.

    15/07/2013 09:08:58 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pima.

    15/07/2013 09:08:59 [INFO] PIM - id Package FAFC744B-DDFB-4097-A41D-7E9539FEBAF9 is already installed

    15/07/2013 09:08:59 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:08:59 [INFO] PIM - created backup file

    15/07/2013 09:09:03 [INFO] utility - the file does not exist

    15/07/2013 09:09:11 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx.

    15/07/2013 09:09:11 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\P6\P6.pimx

    15/07/2013 09:09:11 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:11 [INFO] PIM - XML is valid

    15/07/2013 09:09:11 [WARN] PIM - cannot find the node

    15/07/2013 09:09:11 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx.

    15/07/2013 09:09:11 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pima.

    15/07/2013 09:09:11 [INFO] PIM - id Package B322281B-C04F-438E-82D7-7DA34A359526 is already installed

    15/07/2013 09:09:11 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:11 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:11 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:12 [INFO] PIM - created backup file

    15/07/2013 09:09:15 [INFO] utility - the file does not exist

    15/07/2013 09:09:23 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx.

    15/07/2013 09:09:23 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\LWA\LWA.pimx

    15/07/2013 09:09:23 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:23 [INFO] PIM - XML is valid

    15/07/2013 09:09:23 [WARN] PIM - cannot find the node

    15/07/2013 09:09:23 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx.

    15/07/2013 09:09:23 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pima.

    15/07/2013 09:09:24 [INFO] PIM - id Package B1313DE3-08DF-4834-91D9-CBD1A91488E5 is already installed

    15/07/2013 09:09:24 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:24 [INFO] PIM - created backup file

    15/07/2013 09:09:25 [INFO] utility - the file does not exist

    15/07/2013 09:09:31 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx.

    15/07/2013 09:09:32 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\UWA\UWA.pimx

    15/07/2013 09:09:32 [INFO] C:\New - Start installation package - Setup folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - BEGINNING to the C:\New folder (2) file installPackage \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - tries to access xml path: c:\Nouveau folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:32 [INFO] PIM - XML is valid

    15/07/2013 09:09:32 [WARN] PIM - could not find node

    15/07/2013 09:09:32 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx.

    15/07/2013 09:09:32 [INFO] PIM - package validation file: "C:\New folder (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pima.

    15/07/2013 09:09:32 [INFO] PIM - id Package F0158AAB-0779-4B40-A07D-3F2A21D47E74 is already installed

    15/07/2013 09:09:32 [INFO] PIM - deleteAppletRegInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - deletePackageUpgradeInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - deletePackageInstallationInfoRecords SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - insertPackageUpdateList SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - insertAppletRegInfoList SUCCESS.

    15/07/2013 09:09:33 [INFO] PIM - created backup file

    15/07/2013 09:09:33 [INFO] utility - the file does not exist

    15/07/2013 09:09:35 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - registry = true - createShortcut = true

    15/07/2013 09:09:36 [INFO] utility - success of CreateProcess

    15/07/2013 09:09:37 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:09:37 [INFO] PIM - executed correctly install modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:09:37 [INFO] PIM - installPackage SUCCESS to the C:\New folder (2) file \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx.

    15/07/2013 09:09:37 [INFO] C:\New Setup - finish by installing the package - file (2) \Adobe presenter 8\Build\ASU\packages\CCM\CCM.pimx

    15/07/2013 09:09:37 [INFO] PIM - treatment... _pimCreateOrUpdateAAMInventory

    15/07/2013 09:09:37 [INFO] PIM - inventory already present on the machine...

    15/07/2013 09:09:37 [INFO] installation - TimeLog: installation of the end Lance PDApp.

    15/07/2013 09:09:37 [INFO] installation - path of deployment file not specified in command-line arguments. Skip the deployment of payload part

    15/07/2013 09:09:37 [INFO] installation - = end of Adobe installer. Exit code: 0 =.

    15/07/2013 09:09:37 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:09:37 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:09:37 [INFO] DeploymentManager - Build Version - 3.1.105.0

    15/07/2013 09:09:37 [INFO] DeploymentManager - verbosity Logging Level Set of 4

    15/07/2013 09:09:37 [INFO] DeploymentManager - the code returned by the boot process is (0).

    15/07/2013 09:09:37 [INFO] DeploymentManager - correction of dependencies in local db.

    15/07/2013 09:09:37 [INFO] DeploymentManager - no db media present on the machine.

    15/07/2013 09:09:37 [INFO] DeploymentManager - STEP 4: start the Adobe installer.

    15/07/2013 09:09:37 [INFO] DeploymentManager - path of the common Adobe got.

    15/07/2013 09:09:37 [INFO] DeploymentManager - Installer Adobe launch location is: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe

    15/07/2013 09:16:50 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013-09:16:50 [FATAL] DeploymentManager - the code returned by the Adobe installation process is (6). Stop the installation process.

    15/07/2013 09:16:50 [INFO] DeploymentManager - begins to clean partially recessed payloads.

    {15/07/2013 09:16:50 [INFO] DeploymentManager - undeployment XML created to the path: D:\Users\Vmbuild\AppData\Local\Temp\{2592DDC9-72BD-430A-B2EA-C2839B69B46E}\\{EE4FEE4B-4C1 3 - 44E5 - 8 c 22-230423DB10EF}

    15/07/2013 09:16:50 [INFO] DeploymentManager - begins to launch the Adobe installer to uninstall mode.

    15/07/2013 09:16:50 [INFO] DeploymentManager - path of the common Adobe got.

    15/07/2013 09:16:50 [INFO] DeploymentManager - C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\DECore\Setup.exe

    15/07/2013 09:20:21 [INFO] PIM-uninstall - Version Build - 6.2.136.0

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - verbosity Logging Level Set of 4

    15/07/2013 09:20:21 [INFO] PIM-uninstall - Start: uninstall Adobe Application Manager...

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - County of SIDES occurs

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - SIDES produced install status

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - get the NO SIDE product count

    15/07/2013 09:20:21 [INFO] utility - file does not exist

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - AAMRefs folder does not exist. Products non-cotes does not exist on the system

    15/07/2013 09:20:21 [INFO] PIM-Uninstall - SIDES NOT produced install status

    15/07/2013 09:20:21 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] PIM-uninstall - launch RemoveAAM to: C:\Program Files (x 86) \Common Files\Adobe\RemoveAAM.bin

    15/07/2013 09:20:22 [INFO] UninstallAAM - argc: 2

    15/07/2013 09:20:22 [INFO] UninstallAAM - PIM.dll starting from loading: C:\Program Files (x 86) \Common Files\Adobe\AdobePIM.dll

    15/07/2013 09:20:22 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013 09:20:22 [INFO] DeploymentManager - the code returned by the Adobe installation process is (0).

    {15/07/2013 09:20:22 [INFO] DeploymentManager - sizing tool launch location is: D:\Users\Vmbuild\AppData\Local\Temp\{0EAD2103-39AF-4D85-B942-CAC0E462C482}\\{731F139B-D8D 6-4870-AA90-9626C4D6D4E2}

    15/07/2013 09:20:22 [INFO] PIM-uninstall - Version Build - 6.2.136.0

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - verbosity Logging Level Set of 4

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - killing all deployment workflows

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on the installation of Adobe (Bootstrapper) runs...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait on installation of Adobe (SIDES) if running...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and wait if ACF is locked...

    15/07/2013 09:20:22 [INFO] PIM-Uninstall - Check and close notifiers Adobe Application Manager...

    15/07/2013 09:20:22 [INFO] utility - semaphore is not locked

    15/07/2013 09:20:22 [INFO] PIM - modifying installation execution

    15/07/2013 09:20:22 [INFO] PIM - Build Version - 6.2.136.0

    15/07/2013 09:20:22 [INFO] PIM - verbosity Logging Level Set of 4

    15/07/2013 09:20:22 [INFO] PIM - PIM INSTANTIATE...

    15/07/2013 09:20:22 [INFO] utility - the file does not exist

    15/07/2013 09:20:22 [INFO] PIM - trying to createOrUpdatePIMDbSchema.

    15/07/2013 09:20:22 [INFO] PIM - schema version current db on computer 1.

    15/07/2013 09:20:22 [INFO] PIM - schema version current db installation 1.

    15/07/2013 09:20:22 [INFO] PIM - PIM DB schema is updated. Current schema version is 1.

    15/07/2013 09:20:22 [INFO] PIM - PIM Database is Up To Date.

    15/07/2013 09:20:23 [INFO] utility - path to the process: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe directory of process: \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities arguments C:\Program Files (x 86) being passed: "C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp\\CCM\Utilities\AdobeCreativeCloudClient.exe" - unregister = true - deleteShortcut = true

    15/07/2013 09:20:23 [INFO] utility - success of CreateProcess

    15/07/2013 09:20:23 [INFO] AAMEEUtilities - creation process is complete.

    15/07/2013 09:20:23 [INFO] DeploymentManager - the return Code of the tool in service (0).

    15/07/2013 09:20:23 [INFO] DeploymentManager - commissioning tool succeeded UnSerialize the product.

    15/07/2013 09:20:23 [INFO] DeploymentManager - install workflow ends.

    15/07/2013 09:20:25 [INFO] utility - Sucessfully launched and executed the process...

    15/07/2013 09:20:25 [INFO] PIM - executed properly uninstall modifier to the path: "C:\Program Files (x 86) \Common.

    15/07/2013 09:20:25 [INFO] PIM - PIMSqlite closeDB status 0

    15/07/2013 09:20:25 [INFO] FREE PIM - PIM Instance...

    15/07/2013 09:20:33 [INFO] UninstallAAM - Self delete to delete RemoveAAM.bin and AdobePIM.dll...

    1. Office 2010 64 bit as a dependency.

    2. the register used to deceive the 64-bit version of PowerPoint application is already installed.

    Even though source works with 32-bit powerPoint. but need to MSI 64-bit powerpoint.

  • I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

    I was handed this software this morning which is installed at the end of the day and I have never delt with cloud based adobe installation, I created the package this morning and have it installed on a machine but I'm not sure how to enable it

    Creative cloud learn & support

    http://helpx.Adobe.com/creative-cloud.html

    Cloud creation help / install, update or uninstall applications

    http://helpx.Adobe.com/creative-cloud/help/install-apps.html

  • Why we need to create the package instead of procedure or function in Oracle

    Hello

    Recently, I attended an interview, they asked,
    why we must create the package instead of procedure or function in oracle. Is a specific advantage, if we create together.
    I'm not sure. can u tell me please someone.

    Thank you and best regards,
    Sanjeev.

    Hello

    A part of the oracle documentation.

    What is a PL/SQL Package?
    A package is a schema object which includes subroutines, variables, and logically related PL/SQL types. Packages have two parts: a specification (spec) and a body. Sometimes, the body is unnecessary. The specification is the interface to the package. It declares the types, variables, constants, exceptions, cursors, and subprograms that can be referenced from outside the package. The body defines queries for the sliders and the code for the subprogrammes.

    Benefits of the PL/SQL Packages
    Packages have a long history in software engineering, offering important characteristics for a reliable, maintainable, and reusable code, often in team for large systems development efforts.

    Modularity

    Packages allow you to logically encapsulate Associates types, elements, and subroutines in a module named PL/SQL. Each package is easy to understand, and the interfaces between packages are simple, clear and well defined. This facilitates the development of applications.

    Easier application design

    When you design an application, all you need initially is the interface information in the package specification. You can code and compile a spec without his body. Stored subprograms that reference the package can then be compiled as well. You should not set the package body entirely until you are ready to complete the application.

    Information masking

    With packages, you can specify which types, elements, and subprogrammes are (and accessible) public or private (hidden and inaccessible). For example, if a package contains four subprogrammes, three can be public and one private. The package hides the implementation of the subprogramme private so that only the package (not your application) is affected if the application changes. This simplifies maintenance and improvement. Also, by hiding the implementation details of the users, you protect the integrity of the packaging.

    Feature added

    Sliders and packed public variables persist for the lifetime of a session. They can be shared by all the subprogrammes that are running in the environment. They allow you to manage data in any of the transactions without storing in the database.

    Best performance

    When you call a subprogram packaged for the first time, the whole package is loaded into memory. Subsequent calls to related subprograms in package require no disk i/o.

    Packets stop cascading dependencies and avoid an unnecessary recompilation. For example, if you change the body of a packaged function, Oracle does not recompile other routines that call the function; These routines only depend on parameters and return value that are declared in the specification, so they are recompiled only if the specification changes.

  • photos should be on the hard disk and not a network before catalog reader can find them.

    My photos are on a network drive. I created a catalog on the hard drive of my computer of these photos. When I later open the catalog, Lightroom indicates that the file is not found. Photos should be on the hard disk and not a network before catalog reader can find them?

    "Can't find" indicates Lightroom does not know the location of the photo because it has been moved, deleted or renamed outside of Lightroom.

    To resolve this problem, follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

    Photos can be on a network drive.

  • script to create the folder on the data store please

    Hi all!

    I'm having difficulties writing a powercli script to create a file on a data store... we have a mixture of guests ESX 3.5, 4.0 and 4.1, using data storage mounted via NFS.

    For work I do, I need to:

    (1) create a folder on a data store (check that the folder does not already exist).

    2) navigate to the folder

    (3) and check if a particular file exists in this folder.

    The problem is that the context of my current position makes the code does not. the get-location method returns "C:\temp\ESX", being the record that I run the test script to. I try to use set-card with various settings to try to change the location of a particular data store, but it does not yet work-get-location returns "C:\temp\ESX".

    I think that the code for step 3) above is ok, but I can't get any code to work for) 1 and 2).

    can someone please?

    Thank you

    Ross.

    You must use the vimdatastore provider to access your data warehouses.

    It is documented in vSphere PowerCLI Administration Guide, which is installed on the PC where you installled PowerCLI.

    You can use the 'normal' cmdlets to navigate, test and create folders.

    For example:

    CD vmstore:

    LS # will show the upper level

    CD MyDatastore\MyFolder # navigate with the alias "cd".

    test-path MonAutreDossier # check the existence of a folder or file

    mkdir test # create a folder

    I hope this helps

  • Script to copy the package to local disk folder

    Hello-

    I have a created script that will create a folder on the local drive and it is supposed to enter a folder that I have in the package and copy it to the newly created folder.  I have the script to the root of the package as well as the folder it needs to copy.  When I run the executable on the thinapp I get the following error...

    pic1.JPG

    If I click on ok the thinapp opens but the file was never copied to the local disk.  Can someone please look at the script attached that I created and I would like to know what path must be in the script to locate the folder I'm trying to copy.

    Thank you!

    Hello

    I modified the script slightly and tested. Please find attached the same.

  • WLST Script to create the domain weblogic for IOM and OAM

    Hello

    I intend to set up PS3 IOM - OAM in the new environment. We intend to perform the installation in silent mode. Does anyone have example WLST to create the domain weblogic for IOM or OAM?

    Thank you

    Here is an example of OUD. I post this one since it's the simplest and shortest, but it is the same for OAM and IOM except that the script is much longer because they ask a lot more questions. You will need to export the variables used or replace them with the appropriate values for your system.

    wait-<>

    the value of timeout 600

    spawn ${OUD_BASE}/${WLS_NAME}/common/bin/config.sh mode = console

    # Create a WebLogic domain

    wait {}

    {"Enter the index number to select GOLD *" {send "1\n"}}

    # Choose the components of the Weblogic Platform

    wait {}

    {"Enter the index number to select GOLD *" {send "1\n"}}

    # | ___Oracle directory Services Manager - 11.1.2.3.0 [Oracle_OUD1] [3]

    wait {}

    {"Enter number exactly as it appears in the media *" {send "3\n"}}

    wait {}

    {"Enter number exactly as it appears in the media *" {send "n"}}

    # Change the domain information

    wait {}

    "" Enter the value of * "{send" ${OUD_DOMAIN_NAME} \n "}}"

    wait {}

    {"Enter the number of the option to select GOLD *" {send "n\n"}}

    # Select the target area for this domain directory

    wait {}

    {'Enter' new target location GOLD * {send "${OUD_BASE} / user_projects/domains\n"}}

    wait {}

    {'Enter' new target location GOLD * {send "n\n"}}

    # Configure password and username administrator

    wait {}

    {"Enter the number of the option to select GOLD *" {send "2\n"}}

    wait {}

    "" Enter new * "{send" ${WLS_PASS} \n "}}"

    wait {}

    {"Enter the number of the option to select GOLD *" {send "3\n"}}

    wait {}

    "" Enter new * "{send" ${WLS_PASS} \n "}}"

    wait {}

    {"Enter the number of the option to select GOLD *" {send "n\n"}}

    # Configuration mode field-> 1 | Development mode

    wait {}

    {"Enter the index number to select GOLD *" {send "1\n"}}

    # Java SDK selection

    wait {}

    {"Enter the index number to select GOLD *" {send "2\n"}}

    wait {}

    {'Enter' new JVM Directory GOLD * {send "${JAVA_HOME} \n"}}

    wait {}

    {'Enter' new JVM Directory GOLD * {send "n\n"}}

    # Select Optional Configuration

    wait {}

    {"Enter the index number to select GOLD *" {send "1\n"}}

    wait {}

    {"Enter the index number to select GOLD *" {send "n"}}

    # Configure the Administration Server

    # Change "Listen port.

    wait {}

    {"Enter the number of the option to select GOLD *" {send "3\n"}}

    wait {}

    "" Enter the value of * "{send" ${ODSM_PORT} \n "}}"

    # Change 'SSL enabled.

    wait {}

    {"Enter the number of the option to select GOLD *" {send "4\n"}}

    wait {}

    {"Enter the index number to select GOLD *" {send "1\n"}}

    # Change 'SSL listening Port.

    wait {}

    {"Enter the number of the option to select GOLD *" {send "4\n"}}

    wait {}

    "" Enter the value of * "{send" ${ODSM_SPORT} \n "}}"

    # Then

    wait {}

    {"Enter the number of the option to select GOLD *" {send "n\n"}}

    # wait for install

    wait {}

    {"Successfully created * field *" {send "\n"}}

    EXPRESSIONS OF FOLKLORE

  • The script that creates the default tabs in the margin of the document.

    I need a script that creates marks (1 cm margins: top, left, right, down and two others in the Center, a vertical and a horizontal) independent of the document size. Would look like this: whenever I create a new document, execute an action which rodadoria the script to create a document with the enclosed area, similar to the figure below: thank you!

    http://zip.NET/brsW9j

    #target photoshop;
    if(documents.length) main();
    
    function main(){
    var strtRulerUnits = app.preferences.rulerUnits;
    var strtTypeUnits = app.preferences.typeUnits;
    app.preferences.rulerUnits = Units.PIXELS;
    app.preferences.typeUnits = TypeUnits.PIXELS;
    var cm = activeDocument.resolution/2.54;
    var W =activeDocument.width;
    var H =activeDocument.height;
    guideLine(cm,"Vrtc");
    guideLine(cm,"Hrzn");
    guideLine(W-cm,"Vrtc");
    guideLine(H-cm,"Hrzn");
    guideLine(W/2,"Vrtc");
    guideLine(H/2,"Hrzn");
    app.preferences.rulerUnits = strtRulerUnits;
    app.preferences.typeUnits = strtTypeUnits;
    }
    function guideLine(position, type){
        var desc27 = new ActionDescriptor();
            var desc28 = new ActionDescriptor();
            desc28.putUnitDouble( app.charIDToTypeID('Pstn'), app.charIDToTypeID('#Pxl'), position );
            desc28.putEnumerated( app.charIDToTypeID('Ornt'), app.charIDToTypeID('Ornt'), app.charIDToTypeID(type) );
        desc27.putObject( app.charIDToTypeID('Nw  '), app.charIDToTypeID('Gd  '), desc28 );
        executeAction( app.charIDToTypeID('Mk  '), desc27, DialogModes.NO );
    };
    
  • Running script to create the target database user account: OIM 11 g

    Hello
    We have a database resource on which accounts are created by running a set of scripts. Creating a user on the database directly is not allowed. Is this a common use case? I am sure about how IOM knows that this account was created (how I would list the resources allocated to a user)? If I'm not listed as a resource for a user account, then how changes will be...

    Any suggestions or advice are appreciated.
    Thank you!

    Do the steps in the procurement process for example process shape, object resource, etc. from process.
    Call your script adapter java task map the response code returned by your script.

  • WLST Script to create the field of OSB with Oracle XE

    I installed oracle Service bus 10.3 with Oracle XE on a CentOS linux distribution. Everything went well. I created a default domain with the Wizard (so with Pointbase). Now, I want to go a little further. So I want to automatically create a domain OSB for Oracle XE. I used the following script (I borrowed from another thread ;-))):

    -----
    import sys

    Print "@ from the script...» »

    Try:
    domaintarget = "/ apps/bea/user_projects/domains/test2.
    domainUser = "weblogic.
    wl_home='/apps/BEA/wlserver_10.3'
    workshop_home='/apps/BEA/workshop_10.3'
    osb_home='/apps/BEA/osb_10.3'


    def configOraDB (dataSource):
    CD (DataSource)
    URL = "jdbc:oracle:thin:@localhost:1521:XE".
    Set ('URL', URL)
    Set('DriverName','oracle.) JDBC. OracleDriver')
    cmo.setPasswordEncrypted (domainUser)
    CD (' Properties/NO_NAME_0/Property/user')
    Set ('Value', domainUser)
    CD ('. /.. /.. /.. /.. /.. /.. / JdbcConnectionPoolParams/NO_NAME_0 ')
    cmo.setTestTableName ('dual')


    # Open a field template.
    readTemplate (wl_home + ' / common/templates/domains/wls.jar')

    CD (' Servers/AdminServer')
    together ('ListenPort', 7002)
    Set('ListenAddress','')


    CD('/')
    CD (' Security/base_domain/user/weblogic')
    cmo.setName ('weblogic')
    cmo.setPassword ('weblogic')
    setOption ('OverwriteDomain', 'true')
    writeDomain (domaintarget)
    closeTemplate()

    readDomain (domaintarget)


    addTemplate (workshop_home + ' / common/templates/applications/workshop_wl.jar')
    addTemplate (wl_home + ' / common/templates/applications/wls_webservice.jar')
    addTemplate (osb_home + ' / common/templates/applications/wlsb.jar')

    configOraDB('/JdbcSystemResources/wlsbjmsrpDataSource/JdbcResource/wlsbjmsrpDataSource/JdbcDriverParams/NO_NAME')
    configOraDB('/JdbcSystemResources/cgDataSource/JdbcResource/cgDataSource/JdbcDriverParams/NO_NAME')
    configOraDB('/JdbcSystemResources/cgDataSource-nonXA/JdbcResource/cgDataSource-nonXA/JdbcDriverParams/NO_NAME')



    updateDomain()
    closeDomain()


    except:
    dumpStack()
    Print "unexpected error:", sys.exc_info () [0]
    lift
    -----

    This creates a pretty empty field, as I have not yet created a real database. The command I found was

    loadDB ('10g ','wlsbjmsrpDataSource ')

    that will load the appropriate tables (of OSB/dbscripts /..)

    The problem is that I have no schema/user created in Oracle XE. So, I can manually create this but is not what I want to do. I also want to be scripted. So, how can I do this or is this not the way to go. You always manually create users on the database for three data sources (cgDataSource, wlsbjmsrpDatasrouce, cgDataSource-nonXA) before running a script to make a loadDB. Or do I run some kind of script create_user.sql or something.

    A second issue is that I can't find the scripts for the databases for cgDataSource and cgDataSource-nonXA data sources. They should be somewhere in workshop_10.3 but I can't find them. So, what is the problem here, I have to do a loadDB('10g','cgDataSource') or that eventually an error?

    My last question is I want to change the ALSB_DEBUGPORT (7 something) and debugging of the FMV of port (8453) in my script, how can I do this? I had another instance that already use these ports, so this won't work...

    My preference would be to invoke wslt by ant. This way Weblogic specific configurations can be addressed using WSLT and generic configurations (create DB users) can be done using ant.

    The files SQL to create tables required for the OSB are present in/MiddlewareHome/Oracle_OSB1/dbscripts/oracle. Try to run manually by using the Ant sql task. Create DB users is also possible using the same Ant SQL task http://ant.apache.org/manual/CoreTasks/sql.html.

    There are several ways you can do. I use http://ant.apache.org/manual/CoreTasks/replace.html as shown below in an Ant macro. Similarly, you can replace the ALSB_DEBUGPORT debug port and jvm debugging.

              
         



              
         


              
         


              
         


              
         


              
         


    Maury

  • The available physical disks is not refreshed.

    I very often use the physical disk option when creating a new virtual machine. The list of available devices will not refresh and I have to manually go to the command line and to find the corret device and then manually enter the device. (Linux Xubuntu 11.0)

    Recorded problem, thank you!

  • Script to create multiple [pooled VM specified data store and resources

    I tried to make the following... writng a powershell script to perform the following operations

    (1) create a resource pool named reservedly set to unlimited

    (2) create 4 Virtuall machines in the yellow resource pool named DB-yellow, yellow-APP1, App2-yellow and yellow-bk

    Yellow-DB

    Yellow-App2, App1-yellow and yellow-bk

    (3) Vrtual all machines must be created in the Datastore YELLOW-OS

    (5) Yellow_DB shoule have a second virtual 8 GB of drive size in the YELLOW-PF data store

    Yellow-App1, App2-yellow and yellow-bk should all have a second virtual 5GB drive size in the YELLOW-PF data store

    Any ideas?

    Kind regards

    (1) create a virtual computer

    Hi Gboskin,

    Take a look at the following doc:

    http://communities.VMware.com/docs/doc-6972

    The script can deploy vm in resourcepools, clusters and on esx hosts. You can specify warehouses of data, ip etc.

    On the site of the doc, I have an older version of the script, I will update as soon as possible.

  • Script of PowerCLI to list all VM type disk and OS

    Hello

    I wonder if you can help me.

    I need a script to list all VM hard drive and OS type.

    I can do one or the other (using the cli) but not both on the same report.

    Thanks, Julien

    Hi Julien,

    It could be done this way:

    Get - vm | Select Name,@{N="Configured OS; E={$_. ExtensionData.Config.GuestFullname}},@{N="Running OS; E={$_. Guest.OsFullName}}, @{N = "disktype"; E = {(Get-disque dur $_).} Storageformat}}

    (Configured OS it that you choose when creating the VM, OS running is what we see in fact being run by the VMware Tools)

    Tim

  • PowerCLI script delete/create the snapshot in ESXi5.5

    Hello

    Last week, I upgraded one of my host of esxi5.1 to 5.5

    everythink works exepted one of my script powerCLI.

    On my host 5.5, I can't throw a snapshots of delete/create:

    Remove-Snapshot: 14/11/2013-13:45:37Remove-SnapshotCurrent permit

    or version ESXi prohibited the execution of the requested operation.

    At line: 1 char: 92

    + Get - VM | Get-Snapshot | Where {$_.} Created - lt ((Get-Date).) AddHours(-46))} | R

    eMove-Snapshot < < < <-confirm: $false

    + CategoryInfo: NotSpecified: (:)) [delete-screenshot], RestrictedV)

    ersion

    + FullyQualifiedErrorId: Client20_VMServiceImpl_RemoveSnapshot_ViError, VM

    ware.VimAutomation.ViCore.Cmdlets.Commands.RemoveSnapshot

    A feature has been remove en 5.5?

    Thank you

    I guess that's not possible. This has already been discussed in communities. Please take a look at this thread. https://communities.VMware.com/message/2211533

    ~ dGeorgey

Maybe you are looking for