Scripted Diagnostics native host does not

Mine quit, too... but when I went into the center of the Action of the Control Panel, I found no reliability monitor.  Now that?

Hi Qball263,

This is often caused by corrupted system files. Take a look at this article on how to repair missing or corrupted system files:

http://support.Microsoft.com/kb/929833

Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Catalyst Control Centre: host does not...

    I have a Toshiba PC running on a 32-bit system.  I got an error from the Catalyst Control Centre: host does not... No idea how I can fix this problem?

    Hello

    1. What is the full error message you get?

    2. What do you mean by the creation of guest account?

    You can see the following link for more information about the guest account:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-a-guest-account

    3. you try to create a Standard user account?

    4. have you installed Antivirus software?

    You can see the following link to start your computer by using the safe mode startup options to see if the problem occurs in safe mode.

    Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

    The link below contains steps to start in safe mode:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    If you get the error message when you use MSN messenger, you must get in touch with Windows Live support for assistance

    http://windowslivehelp.com/forums.aspx?ProductID=2

    Hope this information is useful.

  • Windows Diagnostics policy service does not

    Windows Diagnostics policy service does not

    Original title: Network wireless adapter NIC Ethernet network device

    Hello

    • What were the changes made before the problem occurred?
    • When you receive this error message?

    I suggest you try the given steps and check if it helps

    Method 1: Try the steps from the link below

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    Method 2: Try to restore the Transmission Control Protocol / Internet Protocol (TCP/IP).

    The reset command is available in the IP of the utility of Word context. Follow these steps to use the reset command to reset TCP/IP manually:

    1. to open a command prompt, click Start, click Run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER: cmd

    2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
    netsh int ip reset c:\resetlog.txt

    Note: If you do not specify a path of the directory for the log file, use the following command:

    netsh int ip reset resetlog.txt

    3. restart the computer.

    Change TCP/IP settings

    http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

    Method 3: If this does not work, uninstall and reinstall the network adapter

    To uninstall the drivers follow the steps below

    1. click on start, type device manager in the start search box and press ENTER. Click on continue. The Device Manager dialog box appears. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the list of device types, expand network adapters, and then look for the specific device.
    3. right click on the device and then click Properties.
    4. click on the driver tab.
    5. click on uninstall.
    6. click on OK.

    Restart the computer, the default drivers would be installed.

  • TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

    GANYMEDE + configured on the router and the router is in ACS.  I can ping from the ACS, but the router cannot establish a connection to authenticate users.

    AAA server Ganymede group + hq_acs-1

    Server 10.20.17.2

    Ganymede IP source-interface GigabitEthernet0/0

    !

    AAA authentication login default group Ganymede + local

    AAA authorization config-commands

    AAA authorization exec default group Ganymede + local

    AAA authorization commands by default group Ganymede + local 10

    AAA authorization commands 15 default group Ganymede + local

    nested AAA accounting

    AAA accounting newinfo periodic update 60

    AAA accounting auth-proxy default start-stop Ganymede group.

    AAA accounting exec default start-stop Ganymede group.

    orders accounting AAA 15 by default start-stop Ganymede group.

    AAA accounting network default start-stop Ganymede group.

    Default connection accounting AAA power Ganymede group.

    AAA accounting system default start-stop Ganymede group.

    AAA accounting resource by default start-stop Ganymede group.

    BigTree_3945 #sh ip int br

    Interface IP-Address OK? Method State Protocol

    GigabitEthernet0/0 10.4.3.1 YES NVRAM low low

    GigabitEthernet0/1 10.12.10.26 YES NVRAM up up

    Serial0/2/0 unassigned YES NVRAM low low

    Serial0/2/0.602 10.12.15.10 YES NVRAM low low

    11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

    11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id

    11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)

    11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server

    11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

    11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

    11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

    11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

    11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

    11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id

    11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)

    11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server

    11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

    11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

    11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

    11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

    11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."

    11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5

    11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

    11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id

    11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)

    11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server

    11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

    11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

    11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76

    11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76

    11:08:54.692 Apr 13: MORE: sending AV task_id = 332

    11:08:54.692 Apr 13: MORE: sending AV timezone = EDT

    11:08:54.692 Apr 13: MORE: AV = shell shipping service

    11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734

    11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15

    11:08:54.692 Apr 13: MORE: sending AV cmd = show logging

    11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)

    11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server

    11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout

    11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

    11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

    11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

    11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired

    11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning

    11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response

    BigTree_3945 #.

    The AAA Client IP address

    10.4.3. * 10.12.15.10

    Key

    Group of network devices

    Test

    NJT

    AccessLink

    (Not assigned)

    Authenticate using

    GANYMEDE + (Cisco IOS)

    RADIUS (Cisco Aironet)

    RADIUS (Cisco BBSM)

    RADIUS (Cisco IOS/PIX)

    RADIUS (Cisco VPN 3000)

    RADIUS (Cisco VPN 5000)

    RADIUS (IETF)

    RADIUS (Mount)

    RADIUS (Juniper)

    RADIUS (Nortel)

    RADIUS (Sepi)

    Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).

    The 10.12.10. range * is listed under the HQ site.

    Your help is greatly appreciated.

    You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?

    What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?

    Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?

    Using VRF?

    Which version of IOS?

  • When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

    Separated from this thread.

    I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

    Hello

    Thanks for posting your request.

    I would ask you to follow the steps below and check.

    While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

    Once the command prompt window opens, type the following commands and press ENTER after each:

    net localgroup administrators / add networkservice

    net localgroup administrators / add localservice

    Type exit to close the command prompt window, or simply X starting at the top right.

    Restart computer and check if you still receive the message.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • Cannot migrate VM between 5.5 ESXi versions: the version of the product to the destination host does not support one or several CPU features

    We receive an error message that I am trying to make sense. I understand very well the notion of compatibility, CPU, CPUID, masking and so on, after working on a competitor hypervisor. However, this error seems wrong (or needs better wording) based on my understanding:

    Here is the message:

    ----

    A general error occurred: the version of the product to the destination host does not support one or several features of the CPU currently use by the virtual machine.

    Characteristics of CPUID level 0 x 1 'ecx' register are indicated with a '1' bit: x00x:xxx0:xx0x:x 000: x 0 11xx:00: 00xx:11xx

    ----


    This happened during the migration between two hosts ESXi with the same physical processors - in this case, a Westmere X 5650.


    The source host is on ESXi build 2068190 (5.5). The destination host is on ESXi build 1474528.


    The bits it seems to complain are:


    DTES64

    Monitor/MWait

    Cx16

    PDCM

    The punch line seems to be: "the product version of the destination host. However, I have trouble believing that support for these features have been added to ESXi between the two versions. If it were, VMware has been certainly silent about.

    For what it's worth, explicitly set us the CPUID masks in our virtual machines (no, CVS is not an option for us at this time.) This is the mask:

    CPUID.1.EAX = "00000000000000100000011001010001".

    CPUID.1.ECX = "00000010100110001110001000111111".

    CPUID.1.EDX = "10001111111010111111101111111111".

    CPUID.80000001.ECX = "00000000000000000000000000000001.

    CPUID.80000001.EDX = "00101000000100000000100000000000".

    cpuid.d.EAX = "00000000000000000000000000000000".

    cpuid.d.ECX = "00000000000000000000000000000000".

    cpuid.d.EDX = "00000000000000000000000000000000".

    Note that the bits of the message complains (2, 3, 14, 15) * are * in fact forced to '1' in our mask of cpuid.1.ecx. That means (if I understand correctly), ESXi does not have the virtual machine unless the host processor supports the feature. And in our case, the virtual machine will start with happiness on nodes, with both versions. It will be not simply migrate between them.

    So, long story short, is this a bug of ESXi? The error message is misleading? I understand something?

    Thank you


    Matt

    To use the masks feature VM in this way, you must replace all the 1 to your masks with-'s:

    CPUID.1.EAX = "00000000000000-000000 - 00-0 - 000-

    CPUID.1.ECX = "000000-0-00--000---000-000---".

    CPUID.1.EDX = '-000 - 0-0 - 0-

    CPUID.80000001.ECX = "0000000000000000000000000000000 -"

    CPUID.80000001.EDX = "00-0-000000-00000000-00000000000.

    cpuid.d.EAX = "00000000000000000000000000000000".

    cpuid.d.ECX = "00000000000000000000000000000000".

    cpuid.d.EDX = "00000000000000000000000000000000".

    Zeros erases the features that are not available on your hosts Westmere, and dashes will leave the other one features.  The problem with those masks was forced to you certain features on who would have normally been off.

  • single network host does not

    Hello

    the only network of my host does not work for a few days. Before that, he worked.
    I upgraded to 4.0.1 4.0.2 but I don't know if this is the reason.
    Striking is the IP address of the host. That was before the 192.168.106.1. Now, it's in the link-local area.
    My data:
    VMware Player build 4.0.2
    Host: Windows 7 Professional
    Comments: Ubuntu 10.04 LTE, VMware Tools up to date, static ip 192.168.106.12

    ipconfig/all

    Windows IP configuration

    Ethernet VMware Network adapter adapt VMnet1:

    Suffix-Verbindungsspezifisches DNS:

    ... Description: VMware Virtual Ethernet adapt for VMnet1

    Physical address: 00-50-56-C0-00-01

    DHCP aktiviert...: Nein

    Autokonfiguration aktiviert...: Ja

    Verbindungslokale IPv6-address. : fe80::cdae:b6fb:1b1a:3ceb % 23 (Bevorzugt)

    IPv4-address (Auto. (Configuration): 169.254.60.235 (Bevorzugt)

    Subpattern...: 255.255.0.0

    Standardgateway.... :

    DHCPv6-IOOKING...: 352342102

    DHCPv6-Client-DUID...: 00-01-00-01-15-A7-9D-90-F0-DE-F1-70-70-68

    DNS server: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS & #129; BER TCP/IP...: Aktiviert

    I agree with the other poster. Please check if the 'VMware VMnet DHCP Service' (vmnetdhcp.exe) is running. You can also try to do a "Restore Defaults" to see if that fixes the problem.

    André

  • Host does not support configuring passthrough (DirectPath i/o)

    Hello

    I just installed ESXi 5.0 on a Fujitsu CELSIUS W350. http://support.TS.Fujitsu.com/UKFAQ/ProfessionalPC/Celsius/W3xx/W350.htm

    CPU: Intel Core 2 E6300 http://ark.intel.com/products/27248/Intel-Core2-Duo-Processor-E6300-(2M-Cache-1_86-GHz-1066-MHz-FSB)

    The CPU must be compatible with Intel Virtualization Technology (VT - x)

    As far as I can see that the "Intel Virtualization Technology" is also enabled in the BIOS, but I still just get the message "Host does not support configuring passthrough" under "Configuration-> advanced settings.

    I would like to have access to certain PCI cards in guest. Any ideas how to make this work? USB transfer works very well...

    Thank you!

    Welcome to the community,

    What to look for support DirectPath is ' Intel® Virtualization Technology for Directed i/o (VT-d).

    André

  • ESXi 4.1 - Dell Poweredge 2850 - tape backup - host does not support configuring passthrough

    I'm trying to get a tape backup to work on my ESXi host, so I can save my win2003 VM.  I get this error under VMDirectPath, 'host does not support configuring passthrough ".  Under Configuration > storage adapters > I don't see my tape drive listed.  Also, I noticed that my SCSI controller card is NOT on the HCL (Adaptec 39160).  See.  This is probably why passthrough doesn't work.

    So, I was thinking of buying this one (Adaptec 39320) because he seems to be on the list.  This will solve my problem or is this server too old for passthrough to work?

    To use VMDirectpath on an Intel Server chipset used must support Intel VT - d (Directed i/o).   I don't think that's the case with the models of 2850, but if it was you would see an option in the BIOS to enable this.  It is a separate option of VT - x, which allows the host run the 64-bit clients.

  • The script of the recordset does not define the function findServerBehaviors

    Errors frequent pop up. Firstly the premiera listed below. After I closed the alert, the second error appears.

    The script of the recordset does not set the findServerBehaviors function.

    The repeating region script does not set the findServerBehaviors function.

    Dreamweaver CS 6 Version 12.2 develop 6006

    Clear Cache corrupted in DW

    http://forums.Adobe.com/thread/494811

    Plan B, restore preferences

    http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

    Nancy O.

  • This host does not support VT *.

    I get the message: "this virtual computer is configured for.

    64-bit operating systems. However, 64-bit operation is not

    possible.  This host does not support VT continue with 64-bit support"?

    If I don't answer him then continues to try to start the virtual machine but cancel then with "the task was canceled by a user" even if I don't cancel anything. If Yes, well, after validation, and attempt to start the ISO XP it says "this processor is not compatible with x 64 mode. Please install a X 86 32-bit operating system. »

    That's what I get every time I turn on a virtual machine where I'm trying to start a 64-bit XP ISO file so that I can install XP 64 bit on it.

    I am running 4.1 on a 64-bit VM ESX (Redhat Linux 5 64-bit) of VMWare Workstation v7.  I tried Windows XP 64-bit and other flavors of

    Linux 64-bit but same problem with all of them.

    My physical pc consists of: CPU Q6600 (which supports VT).  The mobo is P5E - VM HDMI and VanderPool (VT) with XD bit set is enabled in the BIOS.  It is running

    to 3.60 GHz.

    So I can't install any 64 bit OS because it tells me that my pc ESX 4.1 VM does not support VT... I started in its virtual bios but there is no parameter VT it.  Yet, when I boot ESX with the preferred Mode of CPU Intel VT-x/EPT or AMD-V/IVR value I get a message bit on the right down saying: "this host does not support the EFA. For material aid to virtualization with MMU software. "So I don't know that he sees VT during startup of ESX, only virtual computers created in ESX do not seem to see it.

    I have already added the following in my vm ESX 4.1 .vmx file:

    guestOS = "vmkernel".

    monitor_control.vt32 = 'true '.

    monitor_control.restrict_backdoor = 'true '.

    I tried also to add the above in vmx file XP 64 bit VM as well.  Any ideas on how I can install a 64 bit OS in a virtualized 4.1 ESX? Or it is not possible?

    yorkman.

    you run nested ESX. In ESX ESX. You can install 32-bit operating systems in this type of environment. VMware has no VT support for nested VMS

  • "Your host does not support the current settings for comments.

    My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

    -


    Error

    -


    Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

    Impossible to enter full screen mode.

    Do you want to retry?

    -


    Yes No

    -


    Does perform a work around?

    Thank you

    Alan

    The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

  • Script using AppleScript GUI does not

    Before we go too complicated, I'm starting to get a basic copy/paste using keyboard shortcuts to work. In theory, if I can copy a value of cells in another cell using keyboard shortcuts, I can use keyboard shortcuts, I need more complex scripts.

    Can someone more well informed that I look over the below basic code and tell me what I'm doing wrong?

    (I added the script editor to the security settings for accessibility to allow him to control the computer.)

    My code for a simple copy/paste in figures (other programs also not to answer):

    on run

    say application "Numbers".

    activate

    if not (there are document 1) then error number 1000

    say document 1

    tell the worksheet active

    the value the selectedtable to (the first table whose class of selection range is range)

    the value myRows to count the lines in selectedtable

    say selectedtable

    the value the selection range of cell 2 of rank 3

    sendCopy

    the value the selection range of cell 4 of rank 3

    sendPaste

    end say

    end say

    end say

    end say

    end run


    on sendCopy()

    say application 'Numbers' to Activate

    say application "System events".

    say application process "Numbers".

    key sequence « C »

    end say

    e nd dire

    end sendCopy


    on sendPaste()

    say application 'Numbers' to Activate

    say application "System events".

    say application process "Numbers".

    key sequence « V »

    end say

    end say

    end sendPaste

    Thank you

    Jason

    You favorite the AppleScript Language Guideand then use the appropriate syntax:

    key sequence Using 'C' command down


    key sequence 'V' with the command down


    It may or may not be other contributory factors in your script as to why it does not work.

  • When you start firefox, I get a mention: script is busy or does not respond. script: chrome://tavgp/content/libs/include.js595

    Script: chrome://tavgp/content/libs/include.js:595

    Which indicates an extension does not work properly, perhaps that of moy.

    1. Open the Add-ons Manager (click the Firefox button and then click on Add ons)
    2. On the Extensions Panel, if you have any add-ons AVG, click it to select it, then click on turn off
    3. Restart Firefox to see if you get is more the error

    If you do not have AVG, you can repeat the above process with other extensions. For more information on troubleshooting of this see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • inside the host does not ping external host in transparent mode

    Hi all I need urgent help on this pls I have host on ip add 1.1.1.2/24 connected inside interface of the pix with ios 7.0 in transparent mode. and the external interface of the pix connected to a router IP 1.1.1.1/24.i enabled icmp inspection.i can see the router arp entry into the host and the host arp entry in the mac address router.both are well learned by the pix. no traffic flow form the host to the router. There is no access on the pix of pix.the list does not create an arp entry in the stange very pix. I tried to manuaaly add the entry:

    ARP in 1.1.1.2 0011.d80d.f6ac it gives an error <1.1.1.2>not allowed. network address I do not get it .my question is why the pix don't is not create entry arp. what could be the problem. could someone pls help me with this thanks pls.

    Assane

    Lol this is not as you mentioned. I'll explain the communication all in detail. I hope this helps.

    Assumptions:

    PIX configured to L2, with outside as 0 and inside as 100. insidehost on inside the network and external network configured outsidehost.

    scenario 1

    ==========

    If pix is not configured with the IP address, all IP packets are dropped and syslog Id 322004: no management IP address configured for transparent

    Firewall is saved. So lets see how communication works on L2

    outsidehost tries to communicate with insidehost. ARP request is from outsidehost and is sent through dissemination and it is received by PIX and sent to the inside network, without change.

    Return of InsideHost and the response is sent through to the outsidehost. When you see the arp on the outsidehost and the insidehost entries you will find the corresponding arp entries.

    PIX will forward arp request/reply.

    You can give the command "local host" and you won't see any entries created on the box.

    2nd scenario

    ==========

    An ip address is configured on pix and insidehost starts communication with the outsidehost. Communication is from top to bottom and will allow pix.

    No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

    Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from insidehost to outsidehost.

    Connection between outsidehost and insidehost is denied because there is no access list to allow traffic from low to high.

    You can give the command "local host" and you will see the entrance to insidehost, outsidehost.

    3rd scenario

    =============

    An ip address is configured, created in order to allow the circulation of outsidehost insidehost and applied to the external interface of access list access list.

    No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

    Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from outsidehost to insidehost.

    Access list being present to allow the traffic, the connection is allowed and entry is created in the box.

    Hope that the foregoing erases the entire communication L2 and the communication of different security levels.

    I hope this helps.

Maybe you are looking for

  • I have very old downloads waiting to be downloaded and want to remove the folder "pending download.

    I noticed in my account, I had six downloads pending. Four are songs that I've already downloaded and two old TV shows that I have long looked at and deleted from my computer (to save space). How to remove these from the region showing that they are

  • Upgrade to 4 GB of ram NB550D-109

    Hello I upgraded my Nb550d-109 with 4 GB of ram, but it works only 2 GB usable. In the properties show 4 GB and just next to this (2 GB usable). I update my bios, search msconfig and see if boot options advenced is ok.What I do for my job to better r

  • Cannot read DVD on Satellite L20

    When I insert a DVD, the DVD does start up, sometimes changes the menu of the DVD, but when I start as a movie, I get a Microsoft error message. When the report is sent, I subsequently have a message that something is wrong with the filter... Does an

  • Cannot run the Photosmart C7180 HP printing software

    Hi, I'm new here. I had been using the printer, and following a system failure and corruption of a couple of files, I had to download the operating system on the HP site.  When I tried to run the software, said that a more recent version is already i

  • Power supply Mini 210

    I'm trying to find the plug for a Mini 210-1032 DC. I.e., Volts, polarity of centering pin and Amps max.