scrollbar thumb skin does not reach the bottom of the track

Similar Questions

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• ADF: commandButton does not reach the target method

  Hi all
  
  This is my first post here, I hope you can help me, I'm new in the ADF, and now I am facing a problem, let me explain:
  
  11.1.1.55.36 ADF business components
  jDeveloper 11g Release 1 11.1.1.2.0
  
  In the application, I have a button that changes the attribute of "render" of a showDetailItem, this subject conatains some commandButons but when I click on these buttons the listener method is never triggered. I don't know what happened in this situation. Any idea is always welcome.
  
  Thanks in advance,
  Sergio Valdez
  
  Code:
  commandButton activation online: 58
  showDetailItem on line rendering: 125
  problem commandButtons to lines: 132 & 139
  

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:f="http://java.sun.com/jsf/core"
            xmlns:h="http://java.sun.com/jsf/html"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
            xmlns:c="http://java.sun.com/jsp/jstl/core">
    <c:set var="viewcontrollerBundle"
           value="#{adfBundle['com.axtel.reporteador.MessageBundle']}"/>
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
      <af:document id="d1">
        <af:form id="f1">
          <af:panelStretchLayout topHeight="50px" id="psl1" bottomHeight="26px">
            <f:facet name="top">
              <af:panelGroupLayout layout="scroll"
                                   xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                                   id="pgl2">
                <af:inputText label="#{viewcontrollerBundle.NOMBRE_DE_ENCUESTA}" id="surveyName"
                              value="#{SurveyMB.surveyName}"/>
                <af:panelGroupLayout id="pgl3">
                  <af:commandButton text="#{viewcontrollerBundle.CREATE_SURVEY}" id="surveyCreate"
                                    actionListener="#{SurveyMB.createSurveyListener}"/>
                  <af:commandButton text="#{viewcontrollerBundle.RESET_SURVEY}" id="surveyCancel"
                                    actionListener="#{SurveyMB.cancelSurveyListener}"/>
                  <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                    id="addQuestion"
                                    actionListener="#{SurveyMB.addQuestionListener}"
                                    rendered="#{SurveyMB.surveyAlreadyCreated}"
                                    disabled="#{SurveyMB.questionAddEnable}"/>
                </af:panelGroupLayout>
              </af:panelGroupLayout>
            </f:facet>
            <f:facet name="center">
              <!-- id="af_one_column_header_stretched"  -->
              <af:panelAccordion id="questionAccordionPanel" discloseNone="true"
                                 partialTriggers="addQuestion">
                <af:forEach items="#{SurveyMB.survey.questions}" var="question"
                            varStatus="i">
                  <af:showDetailItem text="#{question.question}"
                                     id="questionDetailItem"
                                     disclosed="#{( SurveyMB.questionEditEnable) and (i.index eq SurveyMB.questionToBeEdited)}"
                                     disabled="#{(( SurveyMB.questionEditEnable) &amp;&amp; ( SurveyMB.questionToBeEdited ne i.index)) or SurveyMB.questionAddEnable}">
                    <f:facet name="toolbar">
                      <af:group id="g1">
                        <af:outputText value="outputText1" id="ot1"/>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_ANSWER_DELETE}"
                                          id="questionDelete"
                                          actionListener="#{SurveyMB.deleteQuestionListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_QUESTION_EDIT}"
                                          id="questionEdit"
                                          actionListener="#{SurveyMB.editQuestionListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                        <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                          id="questionAddAnswer"
                                          actionListener="#{SurveyMB.addAnswerListener}">
                          <af:clientAttribute name="questionIndex"
                                              value="#{i.index}"/>
                        </af:commandButton>
                      </af:group>
                    </f:facet>
                    <af:panelGroupLayout id="pgl5">
                      <af:panelGroupLayout id="questionEditPanel"
                                           rendered="#{SurveyMB.questionEditEnable}">
                        <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                            id="questionTypeToEdit">
                          <af:selectItem label="Seleccion Multiple"
                                         value="checkbox" id="selectItem1"/>
                          <af:selectItem label="Seleccion simple"
                                         value="radiobutton" id="selectItem2"/>
                        </af:selectOneChoice>
                        <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                      id="questionToEdit" rows="2"/>
                        <af:commandButton text="#{viewcontrollerBundle.ADD}"
                                          id="questionEditOk"
                                          actionListener="#{SurveyMB.addQuestionOkListener}"/>
                        <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                          id="questionEditCancel"
                                          actionListener="#{SurveyMB.addQuestionCancelListener}"/>
                      </af:panelGroupLayout>
                      <af:panelHeader text="Respuesta 1" id="answerHeader"
                                      size="3">
                        <f:facet name="menuBar">
                          <af:commandLink text="#{viewcontrollerBundle.EDITAR}"
                                          id="answerEdit"
                                          actionListener="#{SurveyMB.deleteAnswerListener}"
                                          disabled="#{requestScope.SurveyMB.editAnswerLinkEnable}"/>
                        </f:facet>
                        <f:facet name="toolbar">
                          <af:commandLink text="#{viewcontrollerBundle.ELIMINAR}"
                                          id="answerDelete"
                                          actionListener="#{SurveyMB.editAnswerListener}"
                                          disabled="#{requestScope.SurveyMB.deleteAnswerLinkEnable}"/>
                        </f:facet>
                        <af:panelGroupLayout id="answerEditPanel"
                                             rendered="#{SurveyMB.answerEditEnable}">
                          <af:inputText label="Label 3" id="answerToEdit"/>
                          <af:commandButton text="#{viewcontrollerBundle.OK}"
                                            id="answerEditOk"/>
                          <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                            id="answerEditCancel"/>
                        </af:panelGroupLayout>
                      </af:panelHeader>
                      <af:panelHeader text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                      id="panelHeader2" size="3"
                                      rendered="#{SurveyMB.answerAddEnable}">
                        <f:facet name="menuBar"/>
                        <af:panelGroupLayout id="panelGroupLayout1">
                          <af:inputText label="Label 3" id="answerToAdd"/>
                          <af:commandButton text="#{viewcontrollerBundle.OK}"
                                            id="answerAddOk"
                                            actionListener="#{SurveyMB.addAnswerOkListener}"/>
                          <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                            id="answerAddEdit"
                                            actionListener="#{SurveyMB.addAnswerCancelListener}"/>
                        </af:panelGroupLayout>
                      </af:panelHeader>
                    </af:panelGroupLayout>
                  </af:showDetailItem>
                </af:forEach>
                <af:showDetailItem text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                   id="showDetailItem1"
                                   disclosed="true"
                                   rendered="#{SurveyMB.questionAddEnable}"
                                   partialTriggers="addQuestion">
                  <f:facet name="toolbar">
                    <af:group id="group1">
                      <af:commandButton text="#{viewcontrollerBundle.OK}"
                                        id="questionAddOk"
                                        actionListener="#{SurveyMB.addQuestionOkListener}"
                                        immediate="true"
                                        binding="#{SurveyMB.addQuestionOkBinding}"
                                        action="#{SurveyMB.questionAddOkAction}"
                                        partialTriggers="addQuestion"/>
                      <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                        id="questionAddCancel"
                                        actionListener="#{SurveyMB.addQuestionCancelListener}"
                                        partialTriggers="addQuestion"/>
                    </af:group>
                  </f:facet>
                  <af:panelGroupLayout id="panelGroupLayout2">
                    <af:panelGroupLayout id="pgl8"
                                         partialTriggers="addQuestion">
                      <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                          id="questionTypeToAdd">
                        <af:selectItem label="Seleccion Multiple" value="checkbox"
                                       id="si2"/>
                        <af:selectItem label="Seleccion simple"
                                       value="radiobutton" id="si1"/>
                      </af:selectOneChoice>
                      <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                    id="questionToAdd" rows="2"/>
                    </af:panelGroupLayout>
                  </af:panelGroupLayout>
                </af:showDetailItem>
              </af:panelAccordion>
            </f:facet>
            <f:facet name="bottom">
              <af:panelGroupLayout id="pgl1">
                <af:commandButton text="#{viewcontrollerBundle.SURVEY_SAVE}" id="surveySave"
                                  action="#{SurveyMB.surveySaveAction}"/>
                <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                  id="cancelSurvey"
                                  action="#{SurveyMB.cancelSurveyAction}"/>
              </af:panelGroupLayout>
            </f:facet>
          </af:panelStretchLayout>
        </af:form>
      </af:document>
    </f:view>
    <!--oracle-jdev-comment:preferred-managed-bean-name:SurveyMB-->
  </jsp:root>

  Published by: user2931026 on Apr / 10/2010 01:13
  
  Published by: user2931026 on Apr / 10/2010 09:01

  Sergio,
  good work, now I can read the code :-)
  Strange, nothing appears immediately.
  The buttons in the showDetailItem are the only ones who does not?
  One thing you can try is to use the visible property rather than the rendered attribute. The user interface looks the same, but the properties behave different (rendering = false means components are not on the page, visible = false means components are on the page but do not appear to the user).

  Timo

• Print jobs may not reach the printer

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  If a draw is sent, he goes to Quebec, she disappears, but does not reach the printer. It shows the same problem even with the local administrator account.

  It is a network printer and works great for other users.

  Printer driver has been updated.

  Spooler service works very well

  No errors in the event logs.

  This paragraph is confusing.  The computer is now connected to a domain or not?

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  The problem you describe appears if the printer port is not directed to the correct address.  This often happens with wireless printers, but if your computer is connected to a domain, you should ask your network administrator for assistance.

• When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have already reinstalled it, but it does not solve the problem.

  When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have the normal window for 1 second, but it changes in the background window only. So, without the toolbar or navigation. I have already reinstalled it, but it does not solve the problem.

  Hello jonson00, please follow the troubleshooting steps in Firefox opens with a white or transparent window. If this solves the problem, it would be also interesting including the extension has a problem in your case. Thank you!

• DeskJet 1515 does not print the bottom of a page

  Hello Andrew, could someone help me cause I don't know how to fix it. my all-in-one deskjet newly purchased 1515 series does not print the lower part of the page. for example, I insert a border line and then when I press ctrl-p printing layout page showed that the bottom border was not there despite the margins are correct.

  Hello Aldwin06and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with your impressions.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In addition, this problem occur when printing several programs?

  Please let me know what you find.  Thanks for posting on the HP Forums!

• T420 - fingerprint reader does not read the skin dry or wet

  I used the fingerprint reader of my old T61p for years with great success. It didn't matter that my skin is dry or wet, or even if my fingers are a little fat - identification has worked well.

  Now with my T420, I noticed that the fingerprint reader detects my fingerprint only, if the skin on my finger is 'normal', i.e. it does not detect the reading if my fingers are wet or dry. When my fingers are dry, I must always first lick my finger and then wide, this helps.

  It's very annoying feature - is possible to configure the fingerprint reader to be a little less sensitive to the dryness of the finger skin?

  Go to the Lenovo Fingerprint Reader software and look for a slider between Dresser and protected. This move to Dresser; It should contribute to the sensitivity.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• M50-192: screenshots does not to the bottom of the screen

  Hi hope someone can help I have an m50 192 and had since 28/02/2006 the laptop has never even left the House and I have a problem with the screenshots.

  It does not take the screen down in the position of transit to myself as an engineer it resembles a spring broke off the stop screen capture I think it is a defect of design due to the short time I got the laptop.

  I have no extra but guaranteed insurance. I contacted them and they said, it was my fault.

  any help please
  Chris thompson

  Hello

  Well, I put t think that it s a design flaw.
  However, if you have the Toshiba service partner guarantee should solve this problem.
  I think that without tightening the screws holding this mechanism are responsible for this problem.

  If you have experience in the booklets, you can remove media from the image of the screen and check the screws. If you do, be careful!

• close: disappears from the task bar, her box "turn off computer" does not reach out

  I am running windows xp sp3 32-bit. When I shut down the computer through the Start button, the taskbar disappears, and the box "turn off computer" does. I have to use ctrl-alt-del to shut down the computer. I got the settings to a previous restore point when it was still working, but it does not solve the problem. What should I do to return to its original position?

  Hi tx_grizzly,
   
  -Have you done recent changes made to your computer before this problem started to happen?
   
  Try these methods and see if it helps fix the problem.
   
  Method 1: Follow these steps to change the way users log and see that it helps:
   
  a. Click Start. Click on Control Panel.
  b. open user accounts in Control Panel, click on change the way users connect or disconnect, click on use the Welcome screen.
  c. click on apply. Click OK.
   
  Method 2: Try the steps listed in the article for this problem:
  Your computer stops responding when you try to shut down in Windows XP

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-