Scrolling touchpad features work only not on Tecra M3
I mainly used a USB mouse with my M3 lately but went to use the touchpad, the other day and found the scrolling features (i.e. the right and at the bottom of the pad, used to scroll the active window) worked no longer. In the window options of two points, the functions are enabled. I tried altering the functions of the pad, but each time, the new settings have not been applied and next time, I opened the window settings, they were restored to their previous state.
Any help would be appreciated!
I have Tecra M1 and there is the same as on your M3 Touchpad setting. I really don't understand how this can happen. I also use an external USB wireless mouse, but everything works fine. The only thing I noticed is that this feature is possible if the cursor is inside the window where you want to use this feature.
"Messenger Service, or the Net send command not working only not on the service remote computerhe.
Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
operating system is windows xp
service pack 3
Have you done a recent software or hardware changes to the system?
This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.
Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.
Please refer to the article to define the service as automatic:
Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2
For more information, see the article:
The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2
Hope the helps of information.
Let us know if you need help with Windows related issues. We will be happy to help you.
11 flow: Flow 11 touchpad gestures works is not in Windows 10.
I upgraded my Stream 11-10 Windows and now the gestures on the touchpad do not work. I can click on something and that works but the scroll and hitting swiping does not work.
I've updated the drivers.
Do the drivers simply not support this, or is there something I can do to get things to work.
did you try going to the control panel - mouse and touchpad and change settings, (I assume you did)
I had a problem with the touchpad gestures too. The synaptics driver delivered with windows on my hp Pavilion 10 would not save the settings I wanted. In my case, I wanted to get rid of the gestures. But it would not keep my favorite settings after a reboot. I got the old hp support synaptics driver and it works better for me. The only problem is that windows maintains the new driver. To resolve this problem, you must change the device settings to not automatically download the drivers.
Here's what worked for me to stop the new driver of constantly updating:
HP LaserJet M252dw: Airprint works only not on HP LaserJet M252dw
We have a HP Color Laserjet M252DW in our business that we intend to use Airprint for printing from our Mac machines, but we cannot make it work.
We use a Cisco wireless with a 2500 WLC. We have configured mDNS and are able to see other printers, but not the M232DW.
What we have tried so far:
> Search for the firmware updated (not available)
> Reset the printer and reconfigure
> Use the static and DHCP IP addresses
> Restart the printer, WLC and Mac devices
The printer is connected to the same network wireless as users. As I said, Airprint works on other printers, it works just not on this one.
Any ideas of what I may be missing or what I can try?
I got to work. But only after I reset the default printer and it reconfigured.
I needed to configure mDNS on Cisco WLC, then after I reset and reconfigure the printer, it took a little time to see the recording on the WLC and for Apple devices pick up (about 5-10 minutes).
It took that long only for this particular model because the other HP printers have been detected immediately, but those are wired, however.
To accomplish the same thing for devices Meraki see the following link.
Let us know if that helps. Just know you may need to reset your default printer, reconfigure, then wait a while.
Audio & CD/DVD drive not working only not with Vista
I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:
1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
2 > drive CD/DVD is not visible in 'my computer '.
These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...
I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
Any help to solve these problems is much appreciated... Thanks in advanceHey riri,.Try these steps and check the result.
Step 1: Delete the invalid registry keys
1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
2. in the navigation pane, find and then click the following registry subkey:
3. in the right pane, click UpperFilters.
Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
4. in the Edit menu, click on delete.
5. When you are prompted to confirm the deletion, click Yes.
6. in the right pane, click LowerFilters.
Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
7. on the Edit menu, click on delete.
8. When you are prompted to confirm the deletion, click Yes.
9. exit the registry editor.
10. restart the computer.Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in WindowsStep 2: Uninstall any software CD/DVD burning.
1. Click Start, type appwiz.cpl and press to enter.
2. from the list of programs, select CD/DVD burning software and click on uninstall.
3. once the uninstall, restart the computer.Step 3: Install device drivers in a new user account.1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.I hope this helps.Kind regards
Syed - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
validation of single key works only not with the update
I use jdeveloper 12 c on windows internet explore.
I'm at the following link
It works only if I insert new records. After the update, it does not work. He leaves me no update.
How to work around it please?
User, tell us your exact jdev version, please!
It works if yo udefine the unique key in the DB?
Satellite A130: Fn key not working only not with Vista - only FlashCards
I've been looking around in the forums, but I couldn't find solutions to my problem.
I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.
The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.
Is there something else I could do?
I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.
Screen Mode shortcut not working only not with the recent update
Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.
Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.
In any case, fixed now fortunately! I appreciate the help.
British Colombia blog links work only not in mobile view
The site is http://www/tuckermarcom.com/blog .
Someone with experience with links not working do not in your blog Business Catalyst, specifically in a mobile view? I have a responsive model that uses the blog module, but for some unknown reason, the links inline in the blog simply do not work (not type) while in the mobile display (like an iPhone). The blog titles, link to it is the landing page and system of links work well - it is the I added links that seem to have the question. Any help would be greatly appreciated! Thank you
The hotfix allows the pop up in the General settings of the iPhone. Minor correction - great results.
Opacity of scrolling not working only not on a large window.
Andrew please help! GMC dog daycare
When I reduce the low container browser window also changes it opacity.
Therefore the opacity of scrolling only fires when the user is able to scroll to the bottom of the page. If the browser is too large, then it will never trigger. Is there a specific size, you want it will trigger to the? A screenshot of desired vs unwanted is probably the easiest
I do not see where the opacity of changes a background, but I see the background image is resized, which allows to change color. Y at - it a particular browser that you see this effect?
Samsung laptop computer with Windows 7 Home Premium. Scrolling touchpad stopped working with Firefox (but still works with Internet Explorer). I tried to 'restore' to several previous dates, but still does not work. Any ideas?
Do not use this laptop very often. I had done several updates at once (including the Windows updates and the latest edition of Firefox).
Check if there is a PDF file open in another tab. My Samsung R580 scrolls the PDF (which was open on another tab) instead of the tab that is currently open.
HP Touchpad browser works only with the Cisco Valet Plus router
I bought a 16 GB HP Touchpad several months ago and had been enjoying his excellent WiFi feature with my old G from Linksys WRT54GS wireless router until I replaced it with a new Cisco Valet Plus (model M20) wireless-N Router a couple of days.
Although I could easily and successfully, join the Touchpad to the Cisco Valet network, browser fails most of the time to load web pages. For example, if I go to www.yahoo.com, the browser is going to slowly load the web page, or it will expire with a pop-up message error "Impossible to load the Page. If I try to select a link from the homepage of Yahoo, it expires with the same message. And this happens for all web pages. If the initial page happens at all, I can then from this page a link to any other.
I know that the issue is not with the router because I have several other devices connected to it and they are all working well, including a laptop HP ProBook, an iPad and a Wii Console, I use to watch Netflix movies on. None of them has a problem - only the Touchpad.
If I go into settings-> Wi - Fi, it shows that the Touchpad is connected to Cisco network. And when I run the diagnostic system, it shows that the Wi - Fi works correctly.
Does anyone have an idea how to solve this problem?
I have found a workaround that did the trick. I had to change the channel setting auto on a coded hard 1 channel wireless.
Now, the Touchpad works very well, as well as all other devices that have worked.
Connection works only not with the PlayBar activated
I am using the branching feature in Captivate 5.5. I use the reading bar control to allow users to navigate through the course. Each slide is configured with a click box to pause the slide, forcing users to click on the next button on the playback bar to scroll through the course.
The ramification of the feature cannot be used with the automatic navigation (timed navigation)? I really hope I'm missing something simple just to allow the connection to work properly. Currently, the logic of branch is completely ignored I click in the course.
I am using Captivate 5.5; Windows XP SP3; THAT IS TO SAY 8
The ramification is on interactivity. So she requires that the user is interacting with the course somehow and that it not be a variety of responses required under what they do.
If you are using either the interactive objects (click boxes, buttons, text input boxes) that allow the user to make decisions about what direction to take, or else you have advanced conditional actions implemented which are triggered by events drag enter who choose branching based on certain criteria (for example scenarios (, who glides the user saw, or quiz question scores etc.).
If you just use the PlayBar buttons, these are going only to the break, play, rewind, move to the next or a slide backward. These don't really give you options of branches because they just move things in a linear way. You need to design interactive options that create "fork in the road" in some way.
X 3000 wireless mouse: scroll doesn't work is not on the X 3000 wireless mouse
Hello. My HP Wireless Mouse X 3000 is difficult to scroll down. I have to turn this small wheel very quickly, until I get at least scroll. It is connected by using the provided USB wireless receiver box. I tried on two PC with USB 2.0 and 3.0. The same problem. What can I do?
Hi there @anduble,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your mouse's scroll wheel function in Windows 10.
Try using the HP Support Assistant, if you have not already, to search for updated drivers if available.
HP computers - using HP Support Assistant (Windows 10, 8, 7)
HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)
So if you are still having the same problem, try this page: HP PC - keyboard and wireless mouse troubleshooting.
Don't forget to check your mouse settings in Windows 10. Select (left-click) start button, and then select settings > then peripheral. Then select the mouse & touchpad in the list on the left side. You can make adjustments to the scroll wheel function in the options avauilable and link options mouse with dubbing .
Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.
TouchPad gestures works do not [Aspire V5]
So I hope someone who works at Acer reads this. Or someone who is technically advanced.
So, I first noticed the issue with sensitivity. The mouse is very sensitive. Then I noticed that the gestures do not work either. I can't scroll with the mouse. I went in deep and tried to understand the problem (but no solution).
So I performed these steps:
- Changed the speed of the pointer for the fastest (I didn't like the speed of the slow pointer). The pointer was still quite slow.
- Has decided to modify the specific drivers for TouchPad. I go to the tab MOMENTUM under the mouse settings. I look and see that the 'Options' button is greyed out. I also noticed it says "Standard PS/2 Mouse.
- I decide to find the software to change the settings and it located in C:\Program Files\Elantech. I open ETDAniConf.exe and decide to do a test. I uncheck the click right left click and some other parameters of scroll. Nothing helps.
- Then I decided to uninstall it and install the drivers. Did. Nothing has changed. Modification of the wiretap, the scrolling options button does nothing. The mouse settings still shows as 'Standard PS/2 Mouse' even if the tab says MOMENTUM.
- I decided to make a big step and just reinstall Windows 8 altogether using Recovery of Acer. Reinstalled, still faced with the same problem. Always known as "Standard PS/2" mouse
- I try another way to try to solve the problem. I'm trying to find the similar driver more up-to-date. I find on that was much more recent (version 2013 rather than 08.2012). To install it, restart computer. Always without success. Always known as "Standard PS/2 Mouse.
- I decided to go the final round before asking the question here. I downloaded a copy of Windows 8 Pro from the Microsoft Web site and transferred the ISO in the bootable flash drive. I split the hard drive in a clean score (60 GB) and installed fresh Windows 8 Pro on it, without all the Acer drivers. Of couse I was missing the network drivers, so I had to go to my desktop to download the drivers online. I decided to first download the TouchPad drivers. Downloaded, copied to a Flash drive down them on the Acer laptop. Restarted the computer. Always face the question.
So here I am at the moment. I had the laptop for a good discount of my work (as a bonus working there). It's a time discount. As you have noticed, I mentioned he was grateful as "Standard PS/2 Mouse. It's huge index that tells me that the drivers are really bugs. The problem here is that the TouchPad drivers are not recognized as if it were a touch pad, but as a mouse. A mouse that can just right click, left click.
If someone is facing this problem or knows how to fix it, please help me.
So I worked with a Microsoft Technical Support, and apparently the problem is on the side of the Acer. The automatically installed recovery partition the Elantech Drivers for the TouchPad and downloads Web site showed that the pilots Elantech. After some research, we found the Synaptics drivers on their official website and everything started working normally. Please, please, please, please fix this issue. I am frightened by the number of customers who will have to deal with this issue.
Maybe you are looking for
Kernel Panic help - Macbook stopping constantly
I need help to understand the cause of the panic of the nucleus of my macbook. The report is detailed below. Thank you. Panic report *. panic (cpu 0 0xffffff801f1dcb62 appellant): "m_free: free an already freed buf.c:3414 mbuf"@/Library/Caches/com.ap
Dear friends, is it normal for me to see that the color white for example looks like it has grain inside and seems to be a bit like gray-blue? I only mean if you observe it? It's very strange, and given that I don't have opportunity to compare with o
using a sub vi in a modal form in one and one non-modal form in another
I try to use a subvi in 2 places. However in one place, I want that it open in a modal form and in the other I just that it runs the code and generate results without the façade appears. How can I do this? Arjun
BBM BBID update server not available
My phone is Blackberry Bold 9780 OS 6 with BBM version 7.00126. When I tried to open it, he said that necessary BBID updated, so I click on the BTO Update button and bar started process. However, the bar won't move ffrom 0%, and later, he showed "upd
How to set the default Windows Photo Viewer
I looked online because the photo viewer was not open GIF files and tried to go to default programs and check the GIF files, but now everything opens in Internet Explorer. I can't uncheck anything in default programs and he said: it is defined for al