SCXI power light don't is not lit

Hello

Is there a swtich to the SCXI other than in the condition before the case of a PXI 1050 chassis that will turn the monitor for SCXI slots? the led does not illuminate.

Have you checked the fuses and the circuit breaker on the back of the chassis? Refer to the manual for their locations and sides.

http://www.NI.com/PDF/manuals/371481a.PDF

-AK2DM

Tags: NI Software

Similar Questions

  • Display of white/keyboard blackBerry Smartphones don't is not lit

    Pulled my phone out of its holder and noticed the icons have several lines of pixels removed and all titles are in dark blue.  Pulled the battery for 30 seconds, put it back in and when the telephone came, there is no display on the touch screen and backlit keyboard would not work.  The only thing I get is a fixed red light for about 3 to 6 seconds, and then it turns off.

    Tried soft and hard reboots with no luck.

    When it is plugged into the computer via the power cord supplied with the phone, the desktop software does not see the phone.

    Any ideas?

    Warranty technicians tried two new batteries with no luck.  Swapped the SIM card and storage with a new phone and everything worked.  Assumed it was something with the phone.  He had run to warm up the last 10 days or more.

  • y570 special buttons don't is not lit

    Special keys (volume control, fan control and a theatre key button) my y570 do not illuminate.

    someone at - it a similar problem before?


  • HP Officjet Pro 8600: Power light blinking and can't turn on or off

    Printer has power light blink and wll not turn on or off

    [Moved from comments]

    Hi neuserivergirl,

    1. have you made changes on the computer before this problem?

    2. which version of the operating system is installed on your computer?

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    You can disconnect the power cable from the plug, and then try to turn on or off.

    It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

    http://WWW8.HP.com/us/en/contact-HP/contact.html

  • Dell Studio 540MT does not start, green power light on, but the Start button / clear stop completely

    Looking for assistance

    Have a Dell Studio 540MT (purchased in 2009), worked great until 2 weeks ago.   After a temporary system failure would not start.    The power light itself is green fixed.   The power button on the front panel is completely released.

    I read a lot of messages and other information about a similar problem.   Therefore, I did following:

    1. unplug everything, press the power button / stop for 1 minute and retries.   without success

    2. replace the CMOS battery.  without success

    3A jumps the Green and black 20 supply connection wire pins to motherboard.  It started immediately food, fans and hard drive.   so I assumed that the PSU has been authorized.

    4 replace the motherboard with a new mobo.  Curiously, in a first time, there was no change, but after about 2 minutes, the power button was working and power system.   Everything worked so very well.   I had also completely cleaned all the dust in the chassis and radiator, fan and had applied the thermal paster as directed by Artic Silver.   I even turned off after hours of race and restarted system.  Restarted, he noted that it took a couple times by pressing the power button to make it work.   Then the 2nd day I shut down the system by a normal shutdown through Win 7 and let rest for about 10 hours.   When tried to start/turning the power on again, same problem as the original problem... at first, before light power button would show amber flashing when first pressed the power button / stop, then once I unplugged the power cord and let it sit for 1 hour, the light power button showed no light, completely and again no restarts.

    5. I ordered a new power button cord (new)... This could be the problem and replacement will fix?   Is this a known problem that power button can cause this kind of problem?

    6 or is a problem of power supply?   But you wonder why the green light of the PSU and works very well when jumping the Green and black wire on the connector 20 pin?     Before I go buy a new power supply to other suggestions?

    Is there a known issue with button / stop itself and/or PSU on Dell Studio 540 MTs?

    Yes, the front panel can cause failure to start in some models, although I don't specifically remember if the 540 has been affected by this problem. Please let me know if the replacement resolves the problem.

    ATX power supplies should work. Here are the standard components of the Dell desktop computers.

  • Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

    Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

    Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

  • Portege M100 does not start - power light flashes orange

    Hi all

    I have a Portege M100.
    Since ysterday, the computer does not boot. When I push the power button, I hear the noise of the fan starts working, but nothing else happens. The power light continues to blink in orange.
    I removed the battery and tried to turn on the computer with the AC adapter is plugged in, but nothing changes.

    Any ideas on what could be the problem? I would appreciate help,
    Thanks in advance

    Yalin

    Hi mate,

    could possibly be the RAM, so please check the RAM modules and remove 1 module if you have 2 of them installed.
    Otherwise, I check if some another module of RAM is available and install the module of well known work. If this is not sufficient then I strongly recommend you to bring your machine to a service partner chartered for a balance of health/repair of equipment.

    Please give some information about your situation...

    P.S.: you can try to remove the battery and AC and leave the machine without power for about 24 hours. Maybe it helps?

    Welcome them

  • Satellite does not - the power light flashes

    I tried to turn on my laptop and there is a yellow light where the green power light should be, and he won't even be able to until this could be

    Hello

    What laptop do you use?

    Seems the laptop provides a blink code. This means that a material error has been detected.
    Usually short blinking means 0 and a long time means 1.
    The authorized technician must be able to read such a code and to locate the hardware failure.

    Above all it s something wrong on the motherboard!
    Then I n t think you will be able to fix it. This is not possible if you have no experience and the right tools and parts of s.

    So in my opinion, you must contact the ASP in your country for assistance!

    Good luck

  • HP Deskjet D2460: HP DESKJET D2460 not print and keeps blinking on power light

    the printer does not work. It has not been used for almost 3 years I think but the power button blinks and I just got new ink. I installed the cartridge there properly and the computer recognizes it but it will not print anything. its status says ready, but it will not be printed. What to do help

    Hi @epsbarakat

    I'd love to help you with your D2460. I suspect that the following document will be more useful; Flashing power light.

    This document will guide you through the necessary troubleshooting steps specific to the issue that you are experiencing.

  • 18 XPS does not start, the power light will not stop flashing

    I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.

    The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.

    I'll change that.  I went back in and re-removed the cable from the battery.  I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!

  • Why not power light flashing on the laptop in mode 'sleep' (closed monitor)?

    HP G72-253NR laptop

    Windows 7 64 - bi

    Why seeing Flash power on notebook computer in mode 'sleep' (closed monitor) & electric connected?  It's a constant light during use.  Is it possible to fix this?  It's really embarrassing in a dark room.  Thank you.

    I finally found the information through the HP Support Assistant, I needed to download.  I wish there was a way to change this as the lights, but it does not seem that you can.

  • HP dv7-3085dx power light flashes, but the laptop does not work.

    Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

    Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

    I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

    Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

    I just want to now what is the flashing light means light? Why it does not work with the new cable?

    Thanks in advance! Sorry for my bad English...

    Emilio.

    It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

    If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

  • power light flashing hp deskjet 3940, & do not print anything

    I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam.
    I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue.
    I have tried using different USB ports but no success.
    I have ensured that 'use printer offline" is unchecked.
    I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
    

    Hi HPuserSJ,

    I just wanted to check to see if the documents of resolution of problems you have been useful.

  • Qosmio F50 - 10K - multimedia keys are not lit

    According to my topic

    "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

    I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

    In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

    Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

    Hi Jwrath,

    I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Remove the VAP, restart the computer and install the new VAP software.

    In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

  • S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

    I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

    UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

Maybe you are looking for