SD-C2502 reads only CD after reinstallation of the operating system on Tecra

Similar Questions

• Satellite 1800 working extremely slow after reinstallation of the operating system

  I bought a second hand Satellite 1800. I gathered all the drivers on the site of producer s, but when I formatted the HARD drive and installed Windows XP Home edition (my own copy, not any supplied software) the laptop works extremely slow... before that during the process of reading/writing of HARD drive, you could hear that typical for the sound... now the hard drive is completely silent during operation as it's slow as hell...

  I tried to keep up with the web and it turns out that if I reinstalled the OS to Toshiba Recovery CD, it should do the thing... never mind, I didn't know I should have this CD when I bought it... so now I don't... Is there anything I could do about it?
  Help, please

  Q.

  Hello

  As far as I know, this camera comes with W98SE and WME. The recovery CD with operating system Windows XP Home edition for this device is not created by Toshiba.

  You can install Windows XP Home edition and use all the drivers for the Toshiba download site. I don t know how much RAM use this device, but if the unit has less than 128 MB of RAM you can't wait the machine runs fast.

• Satellite M70-155: after reinstallation of the operating system that WLAN is not working

  Hello!

  I have a Toshiba Satellite M70-155.
  I had to change my windows and I do not have the drivers on CD.
  I could find most of the drivers, but I can't do work the * Wifi *.

  I tried to download by toshiba-drivers, but the link does not work.

  Please can someone help me fix my computer?

  If anyone can help me,

  ((Désolé si mon anglais ce n'est pas très bon, mais je ne suis pas anglais, je suis espagnol =) =)

  I think that the laptop belongs to the series of PSM70E and it was equipped with the Intel 11 b/g WLan card.

  The drivers can be downloaded from the Toshiba WLan Portal:
  http://APS.toshiba-tro.de/WLAN/

  Good bye

• HP Compaq SR1913WM Office XP SP3 - after reinstallation of the operating system, difficulties to get drivers Lan loading?

  Hello!  Help!  Virus required reformatting my HD-re-installed OS, HAVE all THE DRIVERS NEEDED (downloaded support)... installed Bios Update 1, GFORCE 2 6150E Nvidia Chipset, Nvidia Video graphics 3rd, 4th Realtek HD Audio... all was well with these... even the audio - which I had trouble with the front! But, when I tried to install LAN/network drivers, (enumerator bus network Nvidia and Nvidia NFORCE Networking Controller), they WILL NOT go!  I drove the search for the installer DIRECTLY to files, but get the same message that the location CONTAINS NO drivers needed!   I have not CHANGED anything, other than the HD format and may not know WHY it don't work? In addition, "MS Tun Mini Port Adapter" appears in the section network adapters in the Device Manager... I never installed it and have no idea why it is there... but it don't me LET... Uninstall error "failed to uninstall the device. The device may be required for a computer start. "Huh?

  Any help will be greatly appreciated!

  P.S. Someone told me that the drivers should be installed in a certain "ORDER"? WHAT is the question?

  Hello:

  The 14F1 is a modem - SoftV92 Data Fax Modem with SmartCP

  Try this driver for an eMachines T6410. Select the modem download. This model uses it even than yours.

  http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1640

  The unknown device is the AMD Away mode driver. You will need to manually install this driver by clicking on the unknown device in Device Manager and click on the driver tab.

  Click on put up-to-date driver, select manual search and navigate to the folder of the driver that you extract the zip file that I attached below.

  You might want to try the package of network drivers from your PC support page. If a driver installed and you still have network problems, I do not know how to solve them.

  Miniport Microsoft map should be native to Windows.

  Good luck

  Paul

• Cannot use trial after reinstallation of the operating system

  Good afternoon! I wonder how to retrieve the activation of download for the free trial of a program? I activated the trial service and had a few days later, a problem in my book and I had to reinstall the previous version of my windows 8.1 System. So adobe, the Criative cloud program not accept lower once again and now tell me to purchase a plan. I haven't used the free trial version or you want to four days of testing. And now, I'm not able to do the test again. What should I do to be able to reinstall the free evaluation test of Adobe Photoshop cc 2015? Recognizing!

  [Title edited for clarity... MOD]

  Please see: software Adobe to trial has expired at the beginning

  You can try to install the first instance on another computer if you have this option.

• After the reinstallation of the operating system on my A30, the player will stop recognizing DVDs

  HI I HAVE RECENTLY REINSTALLED MY OPERATING SYSTEM USING THE DRIVES SYSTEM OF TOSHIBA AND NOW MY PLAYER SD-R2412 CEASED TO DETECT AND KINDS OF DVD.

  AFTER LOOKING AT THE FORUMS, I'M STILL CONFUSED FOR THE ANSWER TO THIS PROBLEM. I DON'T KNOW IF ITS THE DRIVE, THE SYSTEM, DRIVERS OR WHAT.

  ITS AN A30 SERIES PRESENTED AT THE DEC 03. Help, please.

  Hello UCS

  The fact is: If the unit is pre-installed with original recovery media, the installation is absolutely clean and all hardware components are installed with the correct driver.

  What is the State of the drive in Device Manager? The drive is recognized in Windows Explorer? Please check the functionality with the original DVD movies? If there is no success, I guess the drive is faulty, and it is unclear to me that you can remedy this by using a firmware or something like that.

  In my opinion this isn't a problem with the operating system. It may be just a malfunction of the DVD drive.

• I have an unable to print with Epson Workforce 2540 after update of the operating system at El capitan

  I cannot print on my Epson Workforce 2540 via my home wi-fi after updating the operating system to El Capitan (10.11.5).

  The news of printer Epson shows that it is connected to the network. After sending a file to print, I get this error message: stop - "filter" has failed

  The Mac App store shows that my printer software is up-to-date. Can you help me, please?

  did you go to epson web site and watch if they have a driver that support el capitan? If they don't you will have to revert to a version of Mac OS x, they have a driver for or get a new printer

• Cannot turn of the touchpad pavilion dm3 the reinstallation of the operating system.

  I have a Pavilion dm3 1060eo with windows 7 64 bit. I reinstalled the operating system after some malware and now I can not turn touch pad. I downloaded the last mouse commands, but it did not work.

  I also wonder where did the background, one that was installed when I got the computer from HP. The background is shown on the HP page template. He want to come back!

  Sofia

  Have you tried to reinstall the 64-bit Windows 7 to Alps pointing device driver package?

• Product key recovery Windows 8.1 AFTER replacement of the operating system

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  Ask the person who has built your computer and installed Windows 8.1 where they have bought and what they were doing with the product key.

  See you soon.

• After the reinstallation of the operating system, can't listen to music on my Satellite S1900-303

  Hello.
  I have a Satellite S1900-303 and yesterday I formatted it and reinstalled the XP system.

  After that I can't listen absolotely any audio device, even with speakers or headphones. I downloaded from this site, the correct driver, I checked the volume and all stetings, but nothing to do when I play an audio file, it seems it's ok, but I hear no voice to the chapter. What should I do?

  Thanks in advance.

  Hello

  Check Device Manager if the sound card appears correctly and that the driver has been installed successfully.
  Then check the wheel for volume control on the left side.

  AFAIK the Soundfusion Audio application should be pre-installed on this laptop. You should find it in the control manager. There you can set up the speakers.

  The last possibility is to check the sounds and audio devices section you can find also in the control manager.
  Check that the 'secret' is not marked. Check all controllers (also advanced options) and try to put it at high level.

• After installation of the operating system 7, Photoshop CS does not work and is called a power PC program. It is an Intel machine and Photoshop has worked well with OS 10.6.

  After installing OS 7 (from 6 OS) on a machine Intel, Photoshop CS and CS2 will not open. I get the message that the Power PC programs are more supported. Why is this happening? Thank you.

  The message is clear (if you know what Power PC means, in other words). All G5 and many ancient used Mac made by Motorola and IBM called PowerPC processors. More recent that all Mac G5s use Intel processors.

  You talk to any OS, Mac, Windows, Linux, etc, the application that you are using must be written and compiled for the CPU and operating system, or it won't work.

  Your copy of Photoshop were written for older Mac using PowerPC applications and does not not on any Mac running Lion 10.7.x or later version. They ran under Snow Leopard 10.6.x because it was the last version of Mac OS X to include Rosetta, which is an emulator PowerPC that allowed these older apps to function, even though the Mac has an Intel processor.

  Your have several options.

  (1) buy a new version of Photoshop that runs natively under Leo.

  2) back to Snow Leopard.

  (3) purchase Server Snow Leopard from Apple ($20) and that run in a virtual machine as the free VirtualBox, VMware or Parallels. You can then run your PPC software in the virtual machine. It means that you were running an OS within an operating system and need a good amount of RAM installed to support the two well enough for your Mac is not slow to a crawl.

• Satellite A100-906: Express player media use the reinstallation of the operating system

  Hello

  I use a Toshiba Satellite A100-906. I did NOT know about what express Media Player recovery cd's and I've never used it. But now I want to know what's the point of use.

  In any case I had to format my laptop and I have used the recovery cd. So now I've read that if I want to run the express media player I must first of all, insert the express media player cd stop button of my laptop and then use cd/dvd to start it.

  The problem is that I find in win xp with a Windows Media Player. Something go wrong with the format (using the recovery cd)? I had to first install the express media player? and then format and reinstall xp?

  If that's the problem, I, at this stage, to be able to install express media player without losing my data? I expect an answer. I hope you'll forgive my ignorance :).

  Best regards
  Harris

  P.S. when I boot from the media player recovery cd express I get three options 1) crash installation 2) uninstall 3) delete all partitions. So did I express media player installed?

  Hello

  So you're a bit confused. Am I wrong?
  If you want to start the Express media player you n t need to insert the CD of express media player!
  Express media player must be installed on the HARD drive!

  You have recovered the laptop with your recovery CD Toshiba but didn't install the Express media player since the EMP CD!
  This is false.

  Usually the Media Express Recovery CD drive must be run before performing the recovery from the recovery DVD-ROM products.
  Cannot install the Express media player after using the Toshiba Recovery CD!

  So first to run the CD of Express media player and then run the restore CD!

  If you wish, you can consult this useful document of Toshiba providing education
  How to find a laptop Expert Mode with 2 Partitions and Express Media Player?
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  hope I could help a little

• Wiping clear and reinstallation of the operating system/software

  Hello

  Background

  I have a laptop and desktop PC - both running Windows XP Home (version 2002).  I haven't used the old office for about 2 years (that I bought a new desktop computer with Windows Vista) - but I still use the laptop.

  The laptop works ok but often is very slow and freezes, lose its connection wireless internet in the process.

  Re my old desktop PC (Intel, Pentium IV processor)

  As mentioned above, I haven't used it for a few years but I plan to give my father to use.  Before that, I would like to clean your PC of all content, and then install the latest software for him either Vista or even Windows 7.  I understand that it is possible, but would appreciate some advice/guidance on this operation.   I also want to know if the PC is able to run the latest software?  If not, how can I clean cleaned inside and reinstalled the XP software?

  The laptop re
  
  I intend to continue to use my laptop, but because of its slow/freezing problems, I would like to do the same thing as above... clean and reinstall the latest software.

  The goal is to have the old PC and current laptop, redesigned as if they were new!

  If it is not possible to install systems operation/latest software on these machines, so I just want to clear their contents, so that I can sell to buy the latest products.

  Tips, advice and suggestions would be welcome.   My apologies if I have posted this question in the wrong forum... If I should repost the question elsewhere so any guidance most welcome!

  Thank you very much

  As to whether the laptop or desktop can run everything except XP, you have to go the computer mftr. Web sites and see if there are drivers for Vista or Win7. If it does not exist or the computer mftr. States that XP is supported on the machine, just use XP. You also need to know if your computers meet the requirements of system for Vista/Win7.

  http://www.microsoft.com/windows/windows-vista/get/system-requirements.aspx - Vista system requirements
  http://windows.microsoft.com/systemrequirements - Windows 7 system requirements

  How to install Windows Vista - covers the upgrade and clean install - http://support.microsoft.com/kb/918884

  Choice of installation for consumer versions of Windows Vista (32-bit only) - http://support.microsoft.com/kb/932616
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  Complete guide to Lifehacker for Windows 7 - http://lifehacker.com/5386953/lifehackers-complete-guide-to-windows-7
  Windows 7: which concerns you? - http://windows.microsoft.com/en-US/windows7/products/compare-editions

  For the laptop, it will be easier to restore the factory (XP) using any method/media has been provided by the computer laptop mftr. See the manual of the mobile or site tech support of the computer laptop mftr. to find out how to do this on your laptop make/model specific. MS - MVP - Elephant Boy computers - don't panic!

• Win7 x 64 HomePremium - it seems that I can't get rid of an old share name, despite a complete reinstallation of the operating system. Where are stored the share names? Is it possible to change this number?

  In a previous installation, I got the share name of "DData." I did a reinstall & sharing name appeared when I tried to use a different name. I tried to remove it through "Computer records management/Shared/actions." I'm assuming that the share name is imported from an old file NTUSER.dat. I don't really know where the actions are stored. I searched the registry for it, nothing helps. How can I get rid of this useless part?

  Share names are kept in the system hive, not in the user hive. You can remove them as follows:

  1 log in under an administrator account.

  2. click on the start planet.

  3. type the three letters cmd in the search box.

  4. press on Ctrl + Shift + Enter

  5. click on "run as Administrator".

  6. type the following commands and press ENTER after each:
  net share
  (to see a list of all actions)
  NET share "DData" / delete
  (to remove this part)

• Adobe Reader 10.1.1 installed on the operating system Windows 7 with MSWord pdf will not be read aloud. Why?

  What's not here? Everything works and I checked the preferences under Edit menu. I even turned off my firewall to the case where. Also read aloud mode is checked under view in the Menu and I started it at the beginning of the document. I also checked my audio on my computer and everything is ok. Hmmm.? Can someone help me?

  Thanks to a contributor whose Id I have now lost but has the answer! It's go to preferences under display in the Menu and click general. Then uncheck Protected Mode. close the reader and re open and it worked. The voice is so much nicer than the old Adobe Reader software. Thanks to the contributors of the Forum.