SD card format

What format the card SD must be for open C of ZTE with the Firefox OS?

Hey jester,

My card is formatted in FAT32 - however, I'm not sure about the support of NTFS file or any other system.

Is there something specific that you are having problems with your Firefox OS device?

Thank you!!

-Ralph

Tags: Firefox OS

Similar Questions

  • HP 13 Stream: micro SDHC card format

    Does anyone know if it's better/more useful for the sd card format FAT32 or NTFS?

    I bought a 32 GB Kingston SDHC memory microSD which is formatted Fat32 for more storage space.

    Advice and guidance on the format that is more useful for that extra storage space will be appreciated. That is to say it would be more useful for future storage if it changed to NTFS?

    Thank you L

    lion66 wrote:

    Does anyone know if it's better/more useful for the sd card format FAT32 or NTFS?

    I bought a 32 GB Kingston SDHC memory microSD which is formatted Fat32 for more storage space.

    Advice and guidance on the format that is more useful for that extra storage space will be appreciated. That is to say it would be more useful for future storage if it changed to NTFS?

    Thank you L

    For the memory card or a key USB stick your advised to use the Fat32... NTFS is for large capacity HDD/SSD to USB/SD/Memorystick card.

  • max 6 d memory card format

    Don't know if there is an answer to this question. I see others asking also, what is the Maximum memory card format that will probably work in the 6 d?

    I checked the manual, I checked store descriptions, no one seems to know the answer to this question.

    Someone here has never used a map of 64 or 128g in the 6 d? What are your results?

    TIA,

    Craig

    You don't have to worry about the limit, at least not with anything on the market today. The 6 d can read two FAT and exFAT format the card, so it should be able to see up to 512 TB of cards at least. But it only supports SDXC, so the upper limit should be 2 TB.

    There are some people have already tested the Lexar 256 GB SDXC with the 6 d and it works fine. Here's a review: http://www.technologyx.com/pc-hardware/storage/lexar-professional-600x-sdxc-uhs-1-256gb-card-review-...

  • Trying to get my SD card format completed on my Vista box.

    Ok. I have a micro SD 2 GB memory card for my phone. Now, I used to use it with an adaptor or a USB cable or a drive with my computer. Something changed a few months back and no longer performs this work. Always wants to be formatted and never complete format. I swapped it with one USB port for 3 others with no resolution to my problem. Now I have another computer on the network on the floor also under Vista. Works like a charm every time and never had a problem reading and writing to this card. I've exhausted all the ideas that I could find to try to fix this problem. As a note, all the rest I use for USB (mouse, cam, etc..) all work fine in all ports. So I know this isn't the port, but how windows recognizes the effective date on the map format. A also omitted to mention this, but it does not recognize the card whenever I plug. So I'm finally at a loss with what to do next short of reformat my whole system. Any ideas would be greatly appreciated. Thank you.

    Hi OutlawSZ,

    Thank you for your message.

    ""I know this isn't the port, but how windows recognizes the effective date on the card format " "

    How do you come to this conclusion?

    I suggest to perform a clean boot to see if a startup program may conflict with this memory card reading:

    http://support.Microsoft.com/kb/929135

    If this does not work, I recommend that you check your profile for corruption:

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Toshiba Camileo H30 SD card format?

    Hello

    I have a Toshiba Camileo H30, and if I record more then 40 minutes, the camera will be 2 separate files.

    Is it because of the file format? The SD card is formatted in FAT32 formatted by the camera. I know that in FAT32, the biggest file can be something like 4 GB.

    Can I format the SD card to the NTFS format, the file can therefore be bigger? In this way, maybe the video may be longer and in a single file?

    Thank you!

    PS: Good work with NTFS camileo will file system?

    > If I record more then 40 minutes, the camera will make 2 separate files.
    What resolution do you use?
    1 GB of files (1080 p) FH = 15 min of video
    1 GB of files (720 p) HD = 30 min of video

    > Will be good TV work with NTFS file system?
    Test is simply
    Usually, it shouldn't be a problem using NTFS

  • Bad SD card format has been reported on Satellite P200 - Vista 32 bit

    The player card on my laptop seems to have stopped working. I checked the Device Manager and there is no warning in there. I reinstalled the Flashmedia driver just to be sure and rebooted but still no joy.

    The map seems to be recognized to some extent as Windows Explorer shows 'SD Card (f)', but in the management of the computer-> Storage-> disk management F: appears as 23,78 GB of unallocated space... which is rather strange, because it's a 1 GB SD card.

    The only major updates (other than Windows Update), I've done since Christmas (when I finally remember how the map works) was to install the update of the BIOS 2.50 a.,

    Anyone know of any issued with this BIOS version and card readers?

    Sorry buddy but I don t see any SD card problems!
    The SD card has been recognized in windows (My Computer) and seems to work correctly. The size of the SD card seems to be reported wrong
    Is this good?

    I recommend to format the SD card using the Toshiba tool (if pre-installed) and then you can check the size of SD card in the SD card properties.

    Greetings

  • Burned a file .img on 8 GB SD card, formatted the SD card, now showing only 950 MB SD card.

    I burned a file .img on a 8 gb SD card, and because I didn't want the file, I formatted the SD card.

    Now windows says that the SD card has a capacity of 950 Mo. What is the problem and how can I solve this problem?

    Thanks in advance!

    Have you tried to format your USB drive using the command line? A little more difficult operation with no GUI at all

    Here are the codes so that you can give it a try.

    1. Click Start orb and type 'cmd '.
    2. When cmd opens, type diskpart
    3. After that, type listdisk
    4. Select the drive that is your key USB and Select disc (number of your USB drive)without the brackets of type
    5. type clean
    6. type create partition primary
    7. type format fs = fat 32 fast
    8. type exit

    hope this will fix your problem,

    Kind regards

    Andrew

    Always "vote as helpful" for those who helped and 'mark as answer"If the info helped you in a sort of way. Thank you

  • Max Z30 blackBerry on OS 10.2 SD card format

    On a Z30, latest OS (10.2), which is the maximum size Micro SD card that can be used? What format does need (ExtFat, FAT32, NTFS)?

    I've never tested

    I ran Fat 32 only for the reason that my home PC don't reconise xfat

    FAT 32 has a 4 GB limit if doing a lot of video you must use exfat

  • BlackBerry Smartphones Media Card Format fail on several good maps

    I did a little digging, trying to find a solution to my problem before I posted, but most of the positions in the vein of a Media Card not recognized/not possible to format off trail 'is your SD card bad?' with no further response. Here is where I am:

    My phone: Blackberry Curve 8330

    My carrier: Verizon

    My OS: v4.5.0.175

    My problem:

    2 GB media card has been used in the phone since purchase in July ' 08. Since 2 weeks, bed phone is no longer media card. Media card is recognized by phone (which means the phone detects whether or not the card is present). Error message 'Media card can not be read. Check that the memory card is formatted. "Failure to put in shape via phone immediately. When you connect to the computer via the USB port (with mass storage permit), Blackberry device is recognized, but no media card is present. A gray (i) drive appears in my computer, but is inaccessible and cannot be checked or formatted (error message; "Please insert a disk into the drive I :).

    Attempts at solutions:

    Used 3 different media cards: 2 GB Sony 2 GB PNY, 8 GB. Each of the cards tested via a SD adapter and play properly in my computer: can move files to/from, checkdisk and reformat. Have all PC formatted. Each card gives the same error 'Media Card... formatted"as shown above. Hard reset (battery pull) has no effect. Have removed battery for 48 hours (in which case there was stubborn capacitors, or something like that). Support storage of mass and the Media Card encryption or powered off, remove and reinserted card with each parameter not changed, no effect (I can give you a list of all of this, but you get the idea. I'm decently thorough). Rolled back the OS to the previous version (via Desktop Manager), problem still exists. Re-upgrade to the current version, without change.

    To sum up, the phone works very well, but media card can thus not be there. It is not the credit cards, and I don't think it's the software, because I changed the OS from top to bottom, so I guess that maybe material. I would be grateful for all suggestions, and if you need any additional information, I will do my best to provide.

    -SanityDeleted

    Hi and welcome to the Forums!

    Excellent diagnosis! Play well!

    Unfortunately, your data, the only thing I can conclude is a problem with the hardware of the BB itself. You have done everything that I can think of to determine the root cause, and everything points to the material BB. Since you're out of warranty, if you purchased an extended service agreement, you can study the use of this. Otherwise, I'm sure that your carrier will recommend replacement - at a price (for you).

    Best!

  • After an incomplete windows sd card formatting fails to format SD CARD

    I was put in the form of my 16 GB SD card and I saw the notice USB could not be recognized during formatting and this interfered with the formatting. When I reconnected it the SD card I can't open it and windows cannot format the SD card, but it shows in the management of the computer, this unit is in good health and his work correctly when given its properties. I can not even open and format the sd card. What should I do?

    Hello Kwakye,

    I would like to know some information about the problem so that we can help you better.

    What is the make and model of your computer and SD card?

    Thank you for details on the question and your efforts to resolve.

    I also know that inconvenience you encounter lack of SD card. I will definitely help you.

    This problem may occur because of corrupted device driver or incorrect device settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press the keys Windows + C , and then click Search.
    Research b. Type of troubleshooting in the search box and click on it.
    c. click 'show all' and then click 'hardware and devices'.
    d. click on 'Next' and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Use the steps described in this article and check the issue.
    Reference:
    Peripheral connected USB is not detected in Windows
    https://support.Microsoft.com/en-us/KB/2830154

    Important notes:
    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    https://support.Microsoft.com/en-us/KB/322756

    Formatting a SD card deletes all data stored thereon. Be sure to back up data that you want to keep before you begin.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • HP Compaq DX2400 microtour - update of GFX card format.

    Hi guys

    I recently bought a preowned Microtour HP Compaq DX2400 Business and upon receipt of that I made a few additions to his card, I added an another 2 GB of RAM to bring to a total of 4 GB. I have also consulted with the pdf for this product manual and found a list of support for the GFX cards and I bought a pre owned to ATI Radeon HD 3650 (512 MB DH) PCIe x 16 which all together worked very well and I was extremely happy.

    I write today to ask if there is another (preferably 1 GB) GFX cards that work with the system or am I limited to the list in the manual? If it's just a case of choosing a new PCIe x 16 card then I have one waiting to go, but I wanted to see HP and its community first.

    I understand that this age and spec PC will struggle to play current games but I'm looking for abit more grunt for the games I play now.

    Here is the link to the mentioned user manual.

    http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04290832

    Thanks in advance for any information.

    Concerning

    You are the very welcome.

    If you want to try your luck on a map more robust (probably shouldn't be a problem on a PC with a 300W power supply, try a card of 1 GB Radeon HD 6570.

    It is a 128-bit card that is better than a 64-bit card.  It will establish to 60W of power vs less than 30 for the HD 6450.

  • clip + and unsupported card formats

    I thought do a clip more.  If I put in a card that has the music, photos and videos of my rocket in the clip, is it get stuck on the updating of the database?  Or it will freeze if I put it on play together?

    mags1230 wrote:

    I thought do a clip more.  If I put in a card that has the music, photos and videos of my rocket in the clip, is it get stuck on the updating of the database?  Or it will freeze if I put it on play together?

    I think I understand what you're getting.  I've only experienced and the presence of pictures and videos on the microSD card does not interfere with the database or its refreshing - the photos and the video just get ignored by the database (and do not appear in the folder view, either).  And then the Clip + play without freezing.

  • SIM card format

    Looking around it seems all Sony phones I see is a Micro-Sim, is it the same with the Z3? I'm going to need to get a new sim card ordered anyway, I always use the same as that of a decade ago (and I move to another service), I just want to check and make sure you get the right size.

    Nano SIM for Z3:

    http://www.Xperiablog.NET/2014/09/03/Xperia-Z3-and-Xperia-Z3-compact-will-use-a-Nano-SIM/

  • What is maximum photo managed by printer Photosmart 8100 card format?

    I looked in the manual and nothing is there. I'm trying to avoid having to spread the pictures on 2 or more cards.

    Yes, now I'll play with the cards I have. Thank you

  • SD 2 GB card shows only 1 GB after formatting

    I have formatted the card 2 GB flash memory using this utility. After this card took a strange file system, so I foramtted the map using the windows utility and map is displayed as a 1 GB flash card.

    How can I foramt this card than 2 GB?

    Hello nitro

    In the title, you wrote SD card and in your flash Cards display. I guess you certainly SD card. This utility is probably Toshiba SD memory card Format utility. Am I wrong?

    I put t know which card you use, but it should work fine with SD 2 GB Transcend 150 x card which one you have?

Maybe you are looking for