SD card reader no longer works

Similar Questions

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device

• HPE - 590t: 15-en-1 card reader no longer works

  Hi all

  Today, I noticed that my SD card reader stopped working in my HPE - 590t.  I noticed that Windows 10 assigns generic drivers at the following as shown in Device Manager:

  All other players are working perfectly, only the 15-in-1 card reader does not work, which leads me to believe that the generic drivers that has installed 10 Windows are not compadible with this device.

  My HPE - 590 t initially provided with drivers for 15-in-1 card reader and worked well with Windows 7. Anyone know where I can download third-party drivers 3 for this device? I read that some users who have realtek devices are able to use the realtek drivers.

  My HPE - 590 t has a card mother IPMTB-TK Pegatron Truckee - UL8E.

  Given that the specs on my system does not identify the manufacturer of the card reader - 15 in 1, I am at a loss to know where to go for the drivers for the 15-in-1 card reader.   If anyone has any suggestions, I would be very happy!

  HP DV9310 Windows 7 Professional 4 GB RAM

  DV7t-6100 Windows 7 Pro 8 GB RAM

  Hi all

  I just wanted to point to my own son I found a solution.  15 - in a single card reader had apparently dust causing the drive only reads do not my SD cards.  In which case I solved this situation by spraying a can of air into the slots and now the 15 - in-1 card reader works fine without problems.

• E7440 SD card reader no longer works after update November 12 W10

  Since the last update of Windows 10 that came on November 12 the drive in my Dell E7440 SD card no longer works. I've tried different drivers, but when I look in the detail it shows the following:

  PCI\VEN_1217 & DEV_8520 & SUBSYS_05CB1028 & REV_01\4 & 32 c 44212 & 0 & 00E4 had a problem starting.

  Driver name: oem4.inf
  The class GUID: {4D36E97B-E325-11CE-BFC1-08002BE10318}
  Service: O2FJ2RDR
  Lower filters:
  Upper filters:
  Problem: 0 x 15
  Problem state: 0x0

  Simply, it does not show the SD card, and even when I remove all the drivers, restart and install again it does not work. Is this a known issue? Is there a solution already? Windows 10 worked very well in combination with the SD card reader until this update.

  HM, probably it is related to the BIOS update then. I flashed A15 and the SD card works again. I also found others on the internet with the same problem, so A16 BIOS should not be flashed for this model if you want to continue using your SD card reader.

• Satellite A100-259 and PCMCIA card reader no longer works

  I have a Satellite A100-259, I've had for about a year with no problems... so far, the PCMCIA card slot reader seems to have stopped working.

  When I insert a card reader SD PCMCIA discover the laptop hardware as a "PCMCIA UNKNOWN_MANUFACTURE' and subsequently can not find the drivers for it. I tried a couple of different PCMCIA devices and get the same question every time, I checked also double the card reader works by trying it in PC laptop Toshiba-not to the woman.

  The PC is a XP/Vista installation start-up duel and I get the same question under each operating system. I also think that it may have started after I installed upgrading the BIOS to 2.20.

  Any suggestions would be greatly appreciated, b
  Kind regards.

  Try to access the BIOS and set the defaults.
  Don t forget to save the settings after the change.

  By the way; Are you trying to reinstall the PCMCIA driver?
  Go to the Device Manager and remove the PCMCIA computer location.
  Then restart the laptop and check if Windows detects and installs the removed slot.

  Good luck

• SD card reader no longer works in Windows 7

  The SD card reader does not appear in my computer

  It appears in Device Manager under USB - USB2 Realteck card reader

  It appears in the devices & printers when the card is inserted

  In the Disk Manager it appears at the bottom of the screen when a card is inserted

  However, it does not appear in the upper part of the screen.

  I tried to change the drive letter in the lower part of the screen, but I get an error on the display of data is obsolete and should be updated.

  Do a refresh doesn't change anything.

  It appears in Device Manager under USB - USB2 Realteck card reader

  Realtek RTS5128 Version of the card reader driver 6.1.7600.30127

  http://downloads.Dell.com/Chipset/R294157.exe

  This file contains a compressed (or zipped) files. Download the file in a folder on your hard drive and then run (double-click on) to unpack all the files. Follow the instructions to complete the installation.

  Is your version of the free Malwarebytes or the Pro version?

  Log name: System
  Source: Microsoft-Windows-PNRPSvc
  Date: 05/04/2015 23:06:53
  Event ID: 102
  Level: error
  Description:
  The Peer Name Resolution Protocol cloud did not start because the creation of the default identity failed with error code: 0 x 80630801.

  You may need to change your settings in Windows to be able to view hidden files. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Open Windows Explorer by using the hotkey Win + E. place the cursor on computer and expand to see the files by clicking on the icon of the little arrowhead to the left. Place the cursor on a Local Disk (C), expand Local disk (C and continue the procedure following the path of this file):

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Place the cursor on idstore.sst, right-click and select delete from the menu drop-down. Job done. This should prevent the event ID: 102 errors.

  What is your model of Logitech mouse? Look on the underside of the mouse something like M705.

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.

• Card reader does not work for Dell Vostro 1710 with Windows7 (32 bit)

  Hello

  Since I have Windows7 (32 bit version) on my laptop card reader no longer works. I tried several cards smart cameras, but none worked. Does anyone have an idea how I can fix this problem? I think I need a new driver, but I do not found.

  Your help will be appreciated, thank you in advance.

  Best regards

  Weserkrabbe

  
  

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• SD card reader does not work

  1 hp Pavilion Dv7-7002el

  2. Windows 7 64 bit

  SD card reader does not work

  Thank you

  Welcome to Brunn.

  Try to run this driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102462-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5254140 & sw_lang=.

  Let us know how things will go.

  REO

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components