SD card slot does not work on Windows Vista
I just installed Windows Vista RC1, which has just been published
Just about everything works except the secure digital memory card slot.
Until I installed Vista I ran the Compatibility Wizard and he said a few things that may not work, but the one that stood out was "SD Memory Card Format Utility.
I guess that's why the memory card slot is not working?
Anyone know how to operate? This isn't the end of the world because I can use the docking station, but his practice which he just work directly at the exit.
Any help would be great.
Thank you
Maybe the new operating system Vista doesn t include the compatible driver for the SD card controller.
Right now the Vista is not supported by Toshiba because this OS is not official on the market.
Tags: Toshiba
Similar Questions
-
U2413 SD card reader does not work with Windows 8.1
My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?
I have the same problem here too.
The driver above does not work.
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
Why CRYSTAL_REPORT program does not work with windows Vista? __
Why CRYSTAL_REPORT program does not work with windows Vista?
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
My built-in memory SD card reader does not work on Windows 8
I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32. Everyone knows about this problem, and if so how to solve? Thank you
Hello
I understand that the casting of card reader does not work on your laptop.
1. you get any error message?
2 have you tried with different memory cards?I suggest you follow the steps mentioned below and check if it helps.
Method 1:
You can try to run the hardware and devices Troubleshooter and check if it helps.
a. press the Windows key + R, type Control Panel.
b. type troubleshooting in the search bar, click Troubleshooting.
c. click on hardware and sound, click hardware and devices.
d. follow the steps in the wizard to run the troubleshooter.Method 2:
You can download the driver for the reader from the link below and install it in compatibility mode.
http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html
You can follow the link given below to install the driver in compatibility mode.
What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.
-
driver Ricoh SD card reader does not work after recovery/vista
Hello
I have toshiba laptop with vista professional.
I did the recovery on computer
Once the recovery sd card reader does not work.
Yes, I did:
Downloaded latest driver ricoh xd card disk image
installed
restarted
.. .but still does not work
does anyone have a solution for this?
Thank you, klemen
You update your copy of Windows as directed by my last answer?
I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EUCheck the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.
Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'. In the Details under "Ownership" tab select "hardware ID" note the entries under "value".
You can try to install the drivers built into Windows Vista
1. in the Device Manager, click on your PC
2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
5. under "Manufacturer", select "Ricoh company.
6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
7. the full wizard.There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.
-
Tax Turbo installed but does not work on Windows Vista
Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.
Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down". Any help?
Have you ever successfully run this program on your machine? So the system restore helps you, if if he was running very recently.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToWhich edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista? 64-bit versions may not be compatible at all?
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?
The program will run in Mode safe?
Vista advanced boot options
http://Techblissonline.com/Vista-advanced-boot-options/How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Problems with the launch of other programs via shortcuts on your desktop?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.
-
Auto shut off does not work on Windows vista.
Original title: Auto shut-off
I have a HP Pavilion Entertainment PC / Windows Vista and automatic closing does not work. He tries to stop, but it is not...
Hello
Have you tried the command to stop as suggested by me in my previous post dated May 31?Check if you find an error recorded in the event viewer.Open event viewer
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
Step 1: Also try to shut down in safe mode and see if that helps.Reference:Start your computer in safe mode:http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If you are able to stop in safe mode, perform the clean boot and see if that helps.Note: When you're done to diagnose, follow step 7 in the article to start on normal startup. -
Firewall does not work. Windows Vista
Firewall does not work. Security Center is disabled and when I try to turn it on I get a box saying that it can not be started. Also firewall is not running and do not use the appropriate settings. When I try to update the settings, I get a box saying that they cannot be updated.
Hello
1. have you made changes on the computer before this problem?
2. What is the error message or an exact error code?
3. what security software is installed on your computer?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the fixit from Microsoft Fixit article and if that helps.
Diagnose and automatically fix problems of Windows Firewall service:
http://support.Microsoft.com/mats/windows_firewall_diagnostic/
Method 2: The driver of the authorization (mdsdrv.sys) firewall is a system protected Windows file. You can run the tool File Checker system and if the file is found to be damaged, it will be replaced.
Proceed with caution.a. go to start / all programs / accessories.
b. right click on the item "Command Prompt" and select the option 'run as administrator '.
c. click 'Continue' on the UAC prompt.
In the command window, type the following command.
SFC/SCANNOWd. press ENTER.
This will take a few minutes to complete. Try not to use the computer during execution of SFC.
When the tool is finished, restart the computer and review the firewall options.
Let me know the results.Also follow the Microsoft Windows Help article below.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Hope the information is useful.
-
discs made with WIndows XP, but none does not work with Windows Vista
I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.
Hello
· You get the error message?
Follow these methods and check if that helps:
Method 1:
I suggest you run the Microsoft Fixit tool from this link and if it helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems
Method 2:
Follow the steps in troubleshooting this article and check if that helps:
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
-
Little Larousse 2010 does not work in Windows Vista
I installed the software the little larousse dictionary 2010. But when I want to run it I discover the error that I have to reinstall again. But when I reinstall the error appear again. For the first time the program has run but with bad Graphic. What should I do or change in windows to run it?
I don't know why the program will not install correctly. Maybe it's not compatible with Vistahttp://www.microsoft.com/windows/compatibility/windows-vista/default.aspx. Try running it in compatibility mode to see if that makes a difference:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/.
If not, what is the EXACT error message during installation? When you say bad graphics, hear you text is fine and it is only the graphics that are a problem?
When you perform the installation, right-click on the installation icon and click on run as Admninstrator to see if that makes a difference.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
My password does not work. I get the message user profile service has no logon. Help please.
Hello
You can try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
Tecra M2 - card reader does not work on Windows 7
Hi all
I installed Win 7 on my TECRA M2 and everything worked well at the same time... except for one thing! The SD card reader is not recognized (works well with XP).
Hint please?Thanks in advance
JP
Hello!
The card reader is listed in the device with the yellow exclamation point Manager?
Normally, I suggest that you should try the Windows Vista driver card reader, but there is no driver on Vista card reader available on the Toshiba site.
So it seems that you have to live with this problem or you try a driver from another laptop computer card reader
Good bye
-
Evolis Badgy card printer does not work with Windows 8
Original title: Evolis Badgy Card Printer
I have an old Badgy printer of a year that will not work with the new Windows 8. I know it's because of USB 3.0. It still works on the old computer with USB 2.0. How do I make this camera compatible with Windows 8?
I have an old Badgy printer of a year that will not work with the new Windows 8. I know it's because of USB 3.0. It still works on the old computer with USB 2.0. How do I make this camera compatible with Windows 8?
Hello
Is this a new computer you use with Windows 8?
Most new computers that support USB 3.0 will also have at least 1 or 2 USB 2.0 Ports, not all USB devices that support the new USB 3.0 standard.
You can also contact the manufacturer of the printer to help.
Concerning
-
Satellite Pro A200 - Fn keys does not work with Windows Vista
Hello
I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.
Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
BIOS version is now 2.20 - WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]After the installation of the operating system, I installed "Value package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) that contains the "utility Flash Cards". In my understanding, the installation of the "value added package" should allow the use of Fn keys.
This doesn't seem to be true or not true.Here's what's happening.
-Prior to installation of the 'value-added' package, all Fn keys did not work.
-After installation of the "value added package", if the process of TCrdMain.exe is running, all Fn keys do not work.
-If I remove the startup TCrdMain.exe and I restart the PC, only a few keys Fn function (Fn + ESC, Fn + F1).There is no way (or I have not found a way) for all keys Fn works.
Someone knows how to fix this?
Thanks in advance,
mme000
I am not sure, but it may be because of the SP1. I installed Vista Ultimate on A200 and stuff all listed (drivers, tools and utilities) from Toshiba support page.
Contains your Vista DVD facilities SP1 or you install on your own? If you install Vista Ultimate Edition (without SP1) and all the stuff on the Toshiba support site order Instructions of facilities.
Maybe you are looking for
-
How can I recover my address book to a safe hard drive
Try to save the address book of ASUS desktop crashed my wife - have Tbird installed on a laptop of emergency. Through users, AppData, whatever files, but cannot find all folders LGIF to export from... help?
-
I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer. I tried to download the software updates, but nothing seems to work. Any suggestions
-
Vista - loop of configuring updates 3/3 reboot
Hello I use the vista professional win after my last system shutdown, it cannot restart again and give a message of configuration updates 3 of 3 steps and then it restarts again and again even pagesi tried to restart in F8, could also log on windows.
-
I can't read my mail because the font is so small. I checked the Task Manager and everything as it should. I had this problem for a week and nobody seems to know how to solve the problem
-
Installation of the certificate with no shown CSR ASDM ASDM
My ASA will be used as a VPN concentrator. I need to have an ID certificate applied to an interface. I created the Trustpoint. I generated a CSR. I sent the CSR to our Cert ID provider When I went back to the ASA the Trustpoint pending information (u