SD card will not be displayed, when it is connected to the car radio

SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

danimal425 wrote:
SD card works fine until I connect it to my car stereo system... it will only read what's on the internal memory of the player... This is how the player or is there a way to make it visible to my car stereo?

You are the GROUND.

The music library is therefore more a single unit on the Sport Clip.

The card must be accessible regardless even on the Sport Clip itself.

The completely artificial limts placed on the block by SanDisk are meaningless.

It is clear that absolutely no market or focus group research work went into the design of the product.

Tags: SanDisk Sansa

Similar Questions

  • Sansa clip volume problem with 'clipping' or 'pop' - when it is connected to the car radio

    I have two Clips Sansa (2 GB and 4 GB) and that both exhibit the same behavior.  When you listen to the Clips with a helmet, all right.  However, when I connect the clips on my car stereo (using a cable miniRCA to the dashboard stereo) Clips will play OK but the problem is due to the noise of road etc, should I increase the volume on the stereo of dashboard and Clips.  However, when I do that, at some point, the Clips will be 'clip' or 'pop' when the noise gets to a certain level.  I tried to change back and forth between normal and strong volume and also played with the equalizer with no effect.  My car stereo volume is thus contributed to the maximum.  This is a real problem because it is virtually impossible to listen to the Clip when driving (especially with podcasts or audio books where sometimes the voice is low, then I need to turn up the volume).  Is there some kind of limiter built into the Clip?  If so, is it possible to disable it?

    Thank you!

    I don't know how you are set up exactly, but try another cord to connect to the car. It can be such a thing as the cord you can not handle put it.

  • I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

    I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

    How can I fix it? Nothing in help or on the Site.

    Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

    That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

  • My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

    My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

    Hello

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

    I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

  • HP 1200 printer does not print check when it is connected to the Jetdirect card but will display the report

    HP 1200 printer is plugged in with the USB cord to HP Jetdirect box and it gets IP from there.   Printer is set for the server with the ip 192.168.10.7 of print

    Print server is 192.168.10.12.    Backend server account try to print to a control with the 1200 HP and output hit the print queue (we suspended the print queue)

    and then when we release printing printing disappears as his will be printed but no keys comes out.      As a test, we ran a simple report on the same printer who had no special formatting and it printed fine.

    Captured audit printing to a file and then realized that file to the other printer, HP Officejet K80, which was not intended for printing and it prints properly which confirms that the control is built in formatting standard code PCL5e.   What is unexplained, that's why the cheque will not be printed on the HP 1200.    Have already had experiences where the USB slave out of Windows workstatoins printers will not print documents at all the other stations of the network.   The print will be struck by the print queue and disappear, but the printer never lights.   In this case, it will work for printing unformated but won't work for the formatted print PCL.   This could be Windows networking printers or simply a problem with the HP 1200 and forum for both checking.

    Hello

    1. are you able to print Word documents, Excel and PDF?

    2 are computers and printers connected to a domain network?

    I suggest you to connect the printer directly to the computer and check if it helps.

    Please visit the following links and check.

    Printer network problems (applies to Windows 7 as well)
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Let us know if it helps!

  • Since the upgrade to Windows 8, my graphics card will not work. When will the upgrade come?

    I upgraded my VAIO (VPCZ2190X) to Windows 8. I lost the HDMI connection and a few opportunities for expansion pad mouse because of the graphics card with drivers not appropriate. Anyone know how to get these drivers?

    I have the same problem - no HDMI on the output adapter since the upgrade to Windows 8. Sony upgrade information said that we had to restart when the connection to the docking station after the upgrade, but he indicated that it would cooperate.

  • My users will not be displayed when I slave my hard drive with Vista on a computer running Windows 7.

    How can I solve this problem and have my admin and my user appear in the directory?  My hard drive went out on me on my other computer, so I tried to slaves in the top of the tower.  All other folders appear in my directory, but not users.  There are default user on this subject.  Can I use a data recovery software, but it will take a day and a half to get the files.  I ran the program of restoration of data for a few hours and it has recovered some of the pictures I want.  So I try to see if I'm doing something wrong, before investing in the recovery of the entire file.  Thank you.

    Steve

    Hello

    see this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/hard-drive-with-Vista-installation-not-showing-up/8c810028-96c2-4d89-B918-a2a6712aa315

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/help-cant-see-all-the-files-from-my-old-hard-drive/bd3a9873-d871-4ef6-8b55-50292e7e0105

    I hope this helps.

  • I'm not able to take photos with my iPhone, but I have enough storage. No warning, all messages will not be displayed when I click to shoot.

    iPhone 6 s

    iOS 9.3.1

    If you use one, remove the case to see if you can take pictures.

    If you do not use a case, try a reboot of the force.

    Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

    Then try to take a picture.

  • My footer will not dynamically move when you add content to the body.

    I built a model with my envelope header and footer protected as unchangeable. I applied the template to all pages except the index.html page. When I add content in the content body inside a div box there will be blood in the area of the film instead of pushing down. So my menu wrap and footer must move down that I dynamically add content. How can I solve this problem?

    I understand that if I use a regular div tag and not an APdiv tag, I added the content it will then push the footer down. Sorry I am new to Dreamweaver.

  • keep saying my mozilla profile has been deleted and will not open firefox - IE work and connect to the internet very well very sick of this 4th time this week

    Firefox will not open - 4 times this week he froze and crashed and I have to disable my internet connection, then re add before this will work unless I can fix this quickly I going to chrome

    have you tried full uninstall and clean install?

  • Satellite L650-12Z: led does not light up when it is connected to the power source

    My L650 doesn't show the white light anymore when the cable is connected.
    The connectors are clean, and the adapter does not work.

    The laptop still works on the farm (when he was still in power in).

    Also without the battery, there is no white light indicating that the laptop is connected to the domain controller.

    Anyone know what could be the problem and how to solve?

    Hello

    Battery is charging while the AC adapter is plugged?
    Are you sure that the adapter is OK?

    If the battery would be charged correctly and if the laptop works ok, only connected to the power adapter (without the battery) the a problem with the frame of the LED may be possible
    But in this case only the technician must test these parts

  • Ultamate Windows 7 64 bit update will not search for, download, install, or connect to the web.

    I ran fixit of Windows, troubleshooting, stopped the service update, reset the file cache, restarted the windows update service, ran reset it re-register components diagnosis of Windows Update, Windows Update, stand-alone Windows6 update. 1 - KB3102810 - x 64 and updated my windows update agent as well, and it always hangs just looking for updates. All downloads for repair came from Microsoft.com.

    It seems do not connect to the Microsoft update Web site.

    I'm running a PC with Windows 7 Ultimate 64 bit.

    does anyone have a proven fixit?

    Don't know what you describe.  However, it works for most people:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  • No sound from the Clip when it is connected to the car charger and car s in the

    I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

    However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

    Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

    A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

    I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

    Any ideas what is wrong and how to fix it?

    Thanks in advance.

    Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

    The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

    There is no significant deterioration in the sound, and now I can load the Clip while listening.

  • SWF will not be displayed when downloaded

    I'm putting a swf file in my web page.  Pretty basic, I know.  My problem is when I download, it does not appear.  It displays very well when I test it locally.  In IE, the blue circle just keeps spinning.  In other browsers, it just doesn't show up.  I've never had this problem with cs4, so I think that there is something new that I'm missing.

    The file banquet_merge.swf is missing or was not downloaded in the folder 'flash' on your web server.  Looking at the page, the following files are also coming up not found on the loading of the page:

    • Calendar.CSS
    • Calendar.js
    • images/checkRes.jpg
    • SWFObject.js
  • Tecra M4 - MIC will not work correctly when it is used by the language bar

    I just bought a tablet PC - Tecra M4, but trying to dictate to MS office 03 using the microphone. Alas, when the training of speech MS Assistant it works at first but then the program stop recognizing the word and does not continue.

    In the case of MS office, I also turn on the microphone and try to dictate to the program, the small bar recognizes sound and moves high downstairs, where I'm talking to you, but the program does not insert the words I want to say. I can use the microphone to record the vocals in a program note, but would really like to use it in word to dictation.

    If someone could help. THX

    Hello

    I don t think that there is something wrong with the laptop. As you said the microphone works with other programs. In this case there must be something wrong with the software or the use.
    I found this information from Microsoft site. You should check it out.
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/speech_trouble_tts.mspx?mfr=true

    I also recommend to check the external microphone.

Maybe you are looking for