SD-L622A CD/DVD drive does not read some CD - Satellite L300-144
Reader TOSHIBA SD-L622A.
The drive does not boot with Windows XP Service Pack 3 CD, starting with the diagnostic utilities CD (IMHO 2 CD format).
Also, these CDs do not see a car even under Windows XP, Vista.
My wife bought Toshiba L300, but another change. There are player Matsu * a (Panasonic).
Problems with the same discs was not raised.
PS Sorry for a terrible English. My mother tongue is Russian :)
You created the recovery DVDs?
Laptop can't see this recovery DVD?
Have test you with Linux Live CD?
Your laptop can recognize content of different CD/DVD (movies, music, data) under operating system?
Tags: Toshiba
Similar Questions
-
CD/DVD drive does not read discs on Equium A100
My cd/dvd drive does not read any discs be it, white, written or commercially written. It opens and closes and is light to show that he is working on. Device Manager indicates that the device is functioning properly.
Tried the update of drivers, no update available. Tried restoring the system back 1 day and 1 week and 1 month, then and still the problem cannot be corrected. When I put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an i/o device error.
Can someone help me I tried everything my friends and I can think, or is it better to send just to toshiba warranty.
If the solution proposed by James will not help, you should try to remove the drive to CD/DVD in Device Manager.
After phone restart the operating system will recognize and initialize the disk again.
After this review of the procedure if you can read, write the middle. -
MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE
MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.
I DON'T KNOW WHAT IT IS.
I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.
IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.
HELP PLZ
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check the cables
both ends. Remove and replace, do not just tight. For laptops, you can often clean power
and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer
and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I lost my device manager dvd and can not get it back. Of course, I can't read the dvd player. I have removed the upper and lower registry filters and removed and re-inserted the disc. I also bought an external hard drive and the material has been recognized and installed but doesn't always have showe upward on the Device Manager and have not loaded a dvd. Is my computer and HP Pavilion dv9500 laptop and runnig Vista Home Premium
Hello
It is not rare when you have this type problem so that it can affect more than one/all CD and/or DVD
readers.Step 1: Please do all the same underneath if you did some before as it is often the total process
which solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive on someone with the same model (s).Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Satellite L500-13D-CD/DVD drive does not read CD
Hello
I have a Toshiba Satellite l500-137 laptop with vista sp2.
There is a cd writes that my dvd drive would not read, the driver can read other CDs & DVDs well.
who says cd's seems to be fine as it can become red from the other computer.any suggestions?
* Thanks to *.
Hello
That means only one disc can be read from your laptop and all other disks can be read properly? Well, in my opinion, it could be a disc problem, maybe it's striped s and so it can t be read to all readers.
In your case, I would try to clean the lens of your CD/DVD drive. Therefore, you can use a microfibre cloth.
Check it! -
SD-2212 drive does not read some DVD - Satellite 1410
Hello every1,
I have the Satellite 1410 604 for more than 2 years, with player combo mentioned above...
It serves me right, except that it does not read certain types of dvd media, and I use only high quality DVD Verbatim...
It happens that in the last months. It is not my main computer but it's to use in my house, and it really bothers me when my sister or father takes the new A60 Pro satellite on the road (its battery is better), I can't use last discs on it. So if there is a cause of upgrade, firmware I can't find on this site...Thanks in advance...
Hello
I don t think that the firmware update will solve this problem because this pilot acknowledged this DVD some time ago.
In addition, I put t found any firmware of this drive on the Toshiba site.But check if the disk by removing the procedure will solve this problem. So why go to Device Manager and remove the disc. After again starting the operating system should recognize the drive again
Good bye
-
Qosimo G20: Device i/o error - DVD drive does not read CD
Hi, im having a problem with the dvdrw drive on the G20 PQG20E Qosimno, it does not read discs, the only drive that reads without problems is to restore dvd and Heroes (dvd movie) and origonal CD, it does not read any cd s that are not original.
I get a "D:\ is not accessible.
The request could not be performed because of an i/o device error"Anyone have any ideas?
Thank you!
Simon.
Hello
I guess the discs not all burnt gift? t working in this player.
I know that not all media work on all players. In the manual, you should find a list of tested and good work supports.
I recommend that you test the CD and DVD that is recommended in the user's manual. -
The CD/DVD drive does not read discs
Hi, I have a COMPAQ Presario CQ40 with optiarc DVD RW AD - 7561 ATA Device driver, recently the drive does not work properly. It can read and burn the disc, that I already used, but when it's a new (disc white) it does not read the disc. It has an error message "make sure that the disc uses a format windows recognizes. If the drive is not formatted, you must format it before you use it. "the disc is the format that would recognize the system. I tried to uninstall the drivers and reinstalled from the Device Manager, but nothing works, tried too much microsoft fixit, always the same. Hope that there is another work around here... Thank you...
Have you tried using other burning software?
Try this free you see if you receive messages.
-
Satellite P200-140-CD/DVD drive does not read the CD
Hi all
I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
I've updated the drivers, cleaned the lens, completed all the normal tasks.Any advise / solutions out there?
Hello
Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:
(1) run regedit (Start-Run-Regedit online online)
2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
(3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
(4) restart.I hope this works for you too! :)
Good bye
-
COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER
DEAR MEMBERS
V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM
PLS COMMENT
URS
SGUPTA
-
CD/DVD drive does not work on my Satellite L300D
Hi all
* I have Toshiba Satellite L300D laptop and my OS is Windows Vista.*
I don't have any driver cd... when buying. They ask me to download from internet if any necessary driver software.
Now if I put a cd/dvd is not readable. The option of cd/dvd drive is invisible in the my computer window.
I renewed my anti virus and checked the laptop. There a few virus and I deleted all the viruses.
But still my drive does not work.What should I do? Also, my warranty period expires last month. I'm not having any recovery cd also.
Please give me the solution.Hello
Please check if the CD/DVD drive is listed in Device Manager.
If it s listed, then it means that ODD has been recognized by the Windows operating system.In this case, try this;
-Remove the STRANGE to the list of devices.
-remove the filters above and below of this registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-Reboot the laptopUsually, this helps.
-
Satellite A100-447 - DVD player does not read some discs
Hello
I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.
The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.
Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.
What can I do?
Thanks for your help.
AdamHello
You can do the follwowing:
Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,
Download the latest update of the firmware for this drive, install it, and then try again.
Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.
Welcome them
-
Equium A200-1V0-CD/DVD drive does not read disks
Hello
in 'My computer', it shows the drive as being there for the dvd/cd etc, and when you put a disc in it makes all the noises whirring that it starts to read, but they are actually not autostart or anything and you do not see them on the screen 'my computer '.
It lists just like the normal reader, as thoough, that nothing was in it.
Double clicking on it does nothing at all, nor open or explore.
Any ideas please?
Thank you.Hello
There is a general solution but it doesn't work still, but in my opinion it s no doubt worth a try.
First of all, you need to remove the drive from Device Manager.
Simply access the Device Manager, mark the CD/DVD drive and remove it from the list of devices.In addition, you will need to access the registry using the regedit command.
There, you have to completely remove the Upperfilters and Lowerfilters from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}Finally, restart the laptop and wait until the CD/DVD has been recognized again.
Check it!
-
I just realized when inserting a CD, he has not read. I havn't he used in awhile, so it can't just happen. When I insert the CD you can hear it spin and green light flashes, but after about 10-15 seconds it stops and the light goes out. Under 'My Computer', I see more player. I don't see the driver CD/DVD option in my Device Manager menu longer, and I do not see it in the BIOS. I have a HP Pavilion Labtop.
Any ideas? Thank you!!
Hello
Check with HP, their drivers support and documentation online and ask in the forums of HP for known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Since it is not recognized in the BIOS, which means that the reader could have failed, there is a possible cable or
problem of controller or other hardware problems.===================================
If you can get it to be recognized in the BIOS and it still doesn't work, maybe these will help.
You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps. Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Cd/DVD drive does not read DVDs on Windows 7
I have a HP Pavilion dv4 notebook with a DVDRAM GT20L ATA provided device with my computer and since I got it sometimes refuses to read my regular DVDs and dvd movies game disc sometimes. all the drivers are up to date and the problem seems to come and go. any help would be welcome. Thank you
Hello
Do you have any software installed on your computer for CD burning?
Follow the steps in the article to resolve the problem.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Maybe you are looking for
-
Pavilion 15-p18sv: FORMAT
Καλημέρα θα ήθελα βοήθεια γίνεται ώστε καθαρισετε κάνω format μόνη μου αν record υπολογιστή. ΕΥΧΑΡΙΣΤΏ ΠΟΛΎ ΕΚ ΤΩΝ ΠΡΟΤΈΡΩΝ.
-
Technical information of the MK2555GSXF hard drive from Toshiba.
My MBP (MacBookPro) contains a MK2555GSXF of TOSHIBA 250 GB hard drive that crashed. After checking this site for an hour, I am still unable to find technical data referring to this player. The research methods of this site have got to be the worst p
-
I'm new to Mac, how do I disable the sound agreement/notes on login/startup
How can I disable the sound cord on login?
-
Where to send the confirmation of the purchase of the laptop?
I'm registered. I got the answer that the date of manufacture of my laptop is too distant compared to the purchase date.They asked me to send the confirmation of the purchase of the laptop. Does anyone know the address where I should send it (fax num
-
How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page
How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?