SD - MMC shows G:\ application not found.

Hello, I am experiencing problem with card reader Realtek PCIE is SDHC (SD - MMC) slot. When I enter a SD - MMC card, a window pops up and it says not found application G:\. I use windows 7 Professional. My PC has 3 USB connectors. All the slots work for USB but for microSD USB card reader only 1 location works and the other two said 'F:\ or G:\ application not found '.  To fix this, I read somewhere that it will Autoplay > mixed content > non-action > Save will and I did the same thing and now all three notches work (working days) for the card reader. Now my problem is that the SD - MMC slot appears G:\ application not found. So I can't open the microSD through it. I use Avast! 2014 Antivirus and AVG tune up utility optimizer 2014. Please suggest me a way to this problem!

Hello Priyankush,

Thanks for posting your query in Microsoft Community Forum.

According to your description, I understand that your system USB connectors were not working earlier but that they are busy after that you have troubleshooted the Autoplay issue. However, now slot SD - MMC on your system does not work with the same error message. To do this, I would like to know some information as described below.

  1. What is the serial number and model your system?
  2. Your SD - MMC slot ever worked before? If YES, you did important equipment or modifications to the software on the computer before this problem?
  3. Any other SD card isn't available or is it not detected by the slot with success?

The question may arise because of the corrupt card reader drivers that can be updated in Device Manager. So, I would suggest trying the following methods and check if the problem persists.

Method 1:

Try to run the next fixit and check if the problem persists.

Hardware devices do not work or are not detected in Windows

Method 2:

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of devices, search for the name of the built-in SD - MMC card player.
  3. If the device is not detected in Device Manager, and check if this is a hidden feature.

I. click Show hidden devices on the view.

II. expand all winks in Device Manager.

III. there would be grey entries in Device Manager.

Uninstall all entries shaded under all winks, and then restart the computer. Insert the SD card into the slot and check if it works.

Method 3:

Install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works.

Consult the following link:

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

Tags: Windows

Similar Questions

  • Does not open my desktop shortcuts. Shows the application not found.

    A couple of days, I noticed that when I click on my desktop icons they don't open and show application not found! Any solution?

    A couple of days, I noticed that when I click on my desktop icons they don't open and show application not found! Any solution?

    Suggestions:

    1. you said «a couple of days...» »
    Do a system restore. Choose a date that is BEFORE 'a few days' and use that as your restore point.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    2. press on CTRL + Alt + Delete all > Task Manager > processes tab > right click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > OK

     
  • Why after downloading when I click on the download does it show application not found.

    After downloading the two elements of the software when I click on iether sometimes Application not found.

    I think I found what was giving me the problem. I had already downloaded the software and then deleted the same software. I then downloaded the same software, and when I click on recovering, application not found. The initial download was in the trash, when I
    empty the trash and clicked on safe downloading opening O.K. Does make sense?
    Thanks anyway, R. Bellamy

  • Windows Firewall and Security Center will not be open - Application not found

    When I right click on my computer then properties, I get an error message "Application not found c:/windows\system32\rundl32.exe.

    In Control Panel, when I click on the Security center and windows firewall, I get the same thing.

    In the past, when I click on the above, the properties come with several tabs and the info on my computer and the firewall came to show if it is on or off.

    I recently downloaded by Comcast Norton Security Suite. I don't know if this happened before or after that.

    Also, I had something like 'XP Active something' burst by saying I had someone trying to hack into my computer and I might have a virus and run a scan now that I did. He came in saying that a list of things have been found and set up a page where I can buy protection for $59.99 per year. I did that and I who sold his to run a scan with Norton. It showed that she had blocked a Trojan horse and had several blocks of attempts to access my computer.

    Can someone please tell me what to do? I am not very computer English savvy, so simple and clear please.

    Thank you!

    Hi, it seems that you have an infection of malicious software on your computer, the best way is to run the Security Scanner

    just to go to http://safety.live.com and run a full scan service.

    Info on how to make it work just watch this tutorial

    http://www.YouTube.com/watch?v=NgH43lmxl-Y

    answer please if you have a problem

  • HELP: Application not found message during an attempt to a URL

    When I double click the icon of mail in the lower tray it says application not found. Also when you click on a link in yahoo IM. I have windows XP.

    Hi Vikes4life,

    1. what email program are you using?
    2. don't you make changes before the show?

    We recommend that you start the e-mail program and access the email directly to see if the problem persists.

    To help you on Yahoo IM, contact Yahoo Help Center

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD player - Application not found

    Hi I can open and close the drive, but when I try to run the disc (it used to auto-play) it comes up with a message E: / Application not found
    in the properties of the disk drive, it shows as full disk - even when I take the cd or dvd out and close the drawer.
    I did the fix it myself - and got to this 3rd option below:
    However, in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon registry subkey, I have no Winlogon
    I checked the material inside to make sure that the plugs are in place for the cd player and they are as far as I can tell.
    I have seen a lot of blog on this subject - and still no further forward - can anyone help?
    Method 3: make sure the CD-ROM is available only to the locally connected users Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

    CD-ROM to restrict access to only user connected locally can be turned off. To activate this option, follow these steps:

    1. Click Startand then click run.
    2. In the Open box, type regedit, and then click OK.
    3. Locate and then click the following registry subkey:
      HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
    4. In the navigation pane, under data, if the value for allocatecdroms is 0, go to step 5.
    5. In the navigation pane, under data, if the value for allocatecdroms is 1, right-click allocatecdroms, and then click change.
    6. In the value data box, type 0, and then click OK.
    7. Exit Registry Editor.
    8. A test to determine if the problem is resolved.

    If this method resolves the problem, you are finished.

    Hello rayban,.

    Thank you for using the Microsoft answers Forum.

    Are follow you these instructions from a site from Microsoft or a third party site for tech support questions? If you got this information from Microsoft, please provide the number of the KB article and the specific error if it is different from what you have posted above. Did you somehow update drivers or software for the device to maintain properly?

    Please reply to the above questions and then republish here so that we can help you further.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

    Judd
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Application not found error-choose the program you want to use to open this file

    Soon all the world.

    I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

    The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

    Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

    Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

    [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

    I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

    That's on my side, please ask anything and everything, I'll visit this page when I can.

    Good bye!

    P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

    Original title: Windows 7 - Application not found. A big problem or easy-peasy?

    Hello

    Thanks for posting your query in Microsoft Community.

    1. What is the complete error message you get when opening a file?
    2. What happens when you try to open the command prompt?
    3. What happens when you try to access the internet by using Internet Explorer?
    4. You did changes to the computer before the show?

    According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

    I would suggest trying the following methods and check if this is useful:

    Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833

    Method 2:

    For any question, where his prompting you to select the default program
    Try to set the default values for the program
    Change the programs that Windows uses by default

    For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

    I hope this helps. Please let us know the results. Feel free to write us again for any help.

  • g drive doesn't open - application not found error

    my g drive does not open. When I click on it it shows application not found error... If I change the drive letter of the drive works normally. but I want the drive should work with the letter g

    Hi Tejaschaudhari,

    Is the G drive an external drive or an internal hard drive?

    The drive letter is already allocated, so you may not assigned the same name of the drive and the drive.
    I suggest you to run the disk check.

    Check a drive for errors
    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  • Receive error message: \Tempory Internet Files\Content.IE5 application not found, trying to open the compressed programs.

    Original title: \Tempory Internet Files\Content.IE5 application not found

    Trying to open the program zipped have WinZip installed.

    Get this or a similar message: C:\Users\David J Lewis\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\name of the program

    Help, please.

    Hi David,

    1. are you trying to open the file using open with and choose Winzip?

    2. have you already download the file using Internet Explorer?

    3. what version of Windows operating system do you use?

    This can occur if the location of the temporary file is missing or damaged.

    If you have downloaded the file, and then try to re - download it again by changing the location to download the file and see if it helps.

    You can also try to save the file on the desktop and check if you can open the same without any problem.

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

    How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

    Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

    Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

    Assoc .exe = exefile

    Assoc .lnk = lnkfile

  • application rundll32.exe not found application not found __updspapi.dll

    I have two problems at the moment.
    The first occurs if I try to open most of the icons in my Control Panel then I get the message: application not found c\windows\system32\rundll32.exe.
    The second issue is when I try to run a file I am asked to select a program to run it: installation of windows service pack and then get the message: application could not start because updspapi.dll is not found.
    Thanks in advance for any help or advice.

    DanielTL88 wrote: I have XP SP3, AVG Internet Security - with the LinkScanner etc (no previous software)

    She appeared saying that he had found that a Trojan horse and I got rid of it - but since all the shortcuts to programs go straight 'Open with' window...

    You didn't have an antivirus application installed before installing AVG Internet Security (free trial)? See...

    Can I install MSE [or another anti-virus application] to clean my already infected computer?
    http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Frontlines: Fuel of War will not work 'E:\. Application not found"when gameplay disc is inserted

    Frontlines: Fuel of War will not work. The installation went well but when I try to run it, the game never starts. I received a message to update, but the game has not officially begun. So one by one, I tried to run the game after each update and still nothing. Everything is up-to-date drivers, windows updates, all my other games work great (for example Guild Wars, Halo PC, ijji Gunz etc.). I don't get an error message after trying to start the game however when I put the game disc in i get "E:\Application not found". I've never had a problem on XP and I have not tried officially on Vista. How can I get this game to work?

    Hello

    you have the original version (DVD) of the game?

    If there are also other programs to install on record as Microsofts vcredist, please intall all too.
    Another option would be: copy the DVD on hard drive you one that launch the game again. If skip you the DVD-check.

    Concerning

  • Windows Update "Application not found".

    When asked to windows update in Control Panel and then it indicates that the 4 "application not found" security updates keep being loaded whenever I turn computer and forces another install when I stopped 0x8000706BE error code.  The security updates that keep relocation are KB2633880; KB2656352; KB2572073; and KB25188864.

    I'm not high on the list of the "computing", so don't understand is not complex responses.

    Thank you

    [You can print these instructions for reference offline. [If a step said to restart, restart! ]

    1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3 restore all backups "Little Registry Cleaner" & restart.

    4. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    5. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

    Note => for best results, check the option Remove personal settings .

    6. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

    6B. do disappear/close the automated help pop up. then...

    6. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [1]

    7 restart once again.

    8. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (for example, KB2633880;) KB2656352; KB2572073; KB2585542).

    Note-online if an update of the root certificates is listed under the category of updates software optional on the left side of the scan results window, installed to take full advantage of IE8 security. [3]

    Tip-do NOT install any other updates online software optional or any optional hardware updates.

    9. in response to this post with a status report.

    Good luck!

    ==================================================
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  • Cannot open applications, applications not found

    Original title: Windows XP - application not found

    Original title: Hi everyone

    I inserted a USB as my avira said that there is no virus, but after I used the usb, suddenly I can not run my application and found that the file of the application is now an EXE file and whenever I try to open it, open box appeard saying dialogue and save the file , sfter I save the file and try to run it, it goes back again to the opening dialog... when I look for the folder options, folder files were missing. When I open the properties of the computer, its lack, and I discovered that the registry editor is missing... now the entire application, whenever I open it, it says application not found. Tips than me that I have to do the window set up again unfortunately requires cd rom, and I do not have cd rom... don't you think that I have the choice more to recover everything, don't you think not that the solution is to have a repair on my window and reformat?

    Hello

    1. What happen exactly when you try to open the applications?

    2. you receive an error message?

    3. this happens with all applications you are trying to open?

    Method 1:

    You can try to start the computer in safe mode with networking and check the issue in the clean boot state.

    Step 1:

    You can start the computer in safe mode with network. See the following article to start the computer in safe mode with network.
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    Step 2:

    You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: when you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

    Method 2:

    Try to scan your computer with the Microsoft Safety Scanner and check.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
    Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.

    Method 3:

    You can check the question in the new user account. Consult the following links.

    How to create and configure user accounts in Windows XP

    http://support.Microsoft.com/kb/279783

    How to copy data from a corrupted to a new profile in Windows XP user profile

    http://support.Microsoft.com/kb/811151

    It will be useful.

  • Application not found Error Messages

    Application not found error message Hi,.

    I recently had a virus on my Windows XP which I removed with Norton Internet Security.  The virus was called "XP Antispyware 2010".  After that I took it with the version of Norton Internet Security 2010 newly installed, I realize that I could not access the internet directly by clicking on the icon. a window will open asking for me to choose the program I want to use to open IE.  He would then run the program but nothing happens and it goes in circles asking to select a program to open, run, etc.

    Soon I noticed that clicking on other applications would result in an error message saying "Application not found".  I can't remove programs from my control panel because it is inaccessible, I can't open Microsoft Office programs directly unless I go to my computer.  I can't do a system recovery or restoration; the same messages will pop up. So basically, I can't make any changes to my laptop programs or access directly.  Help, please.

    I called Symantec who tried to help.  Norton Internet Security has been removed from my laptop, but I still have the same problems.  I was then told that this isn't a problem with Norton, but with Windows and the file sharing/accessibility.

    Help, please.

    Thank you

    Hi, Debbie.

    First of all, Norton is not the choice of the antivirus, I recommend, and I seriously doubt that he removed all, if any, elements of Xp Antispyware 2012. Their support is not much better that you will probably notice now.

    The errors that you receive are obviously the result of the malware.

    We will try to solve your problems one at a time.

    Using another computer, and then transfer the files to the computer in question via revovable storage like a disk or flash/thumb drive click HERE. Download the file. Extract the contents of the zip file.

    Click HERE and download another zip file, extract the contents again.

    Right-click on the files one at a time of course and choose "merge". Confirm guests. You should now be able to open your shortcuts and executable files.

    Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose whether to remove anything found. Once completed click HERE and download Superantispyware Portable. Perform a quick scan again remove anything found.

Maybe you are looking for

  • FaceTime does not sound on my iMac

    My ring of iPhone and iPad, but my iMac is silent. I looked through the settings but can't find anything to change for the better.

  • How we replace winxppro 64 bit with 32 bit os winxppro?

    I prefer not to make a facility clean, just get the machine back to 32-bit so I can use all my old stuff. Thank you Tom

  • IDE hard drive into a portable speaker access problem.

    I got your desktop who died (power is not a replacement value).  I removed the two hard drives (IDE) and bought pens for use as portable hard drives.  I have not had any problems at all with the 'second' hard disk that I had originally put in place a

  • EA4500 and OpenDNS

    Hi all I tried for 30 minutes or so to get my OpenDNS settings in my EA4500 but I can't find options for DNS on the Cisco Connect Cloud Firmware v2.1.38.138880 entries. I use PPPoE for my ADSL settings to work, anyone can help me can where I insert t

  • games on google

    I have upgraded my experia z2 5.0.2 now I can not access google playing games. He says he has to be updated but when I click on install, it says it's not available in my country.