SD R6372 DVD burner does not recognize DVD + R

Similar Questions

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• DVD burner does not recognize blank DVDs, but will recognize blank CD?

  I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

  I have a Dimension E310

  It was supposed to come with a cd burner and a dvd burner combo.

  The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

  I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

  As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.

  
  

• HP Probook s 4540 DVD burner does not recognize blank disc

  Hello

  I have a 4540 s HP's Probook.  Windows 7.

  When I insert a CD or a blank DVD, it no longer recognizes.

  The Player keeps just ROAR and stop.

  Windows Media does not see disk space either.

  I downloaded and ran this fix attempt

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  And I get

  Problems found

  Matthewf

  Please see the document

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootDisplay/?sp4ts.oid=5229455&spf_p.tpst=psiContentDisplay&spf_p.prp_psiContentDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03280697-3%257CdocLocale%253Den_US&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Update Sofware reboot and try burning again

  Application CyberLink PowerDVD

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64647.exe

  Software CyberLink Power2Go

  FTP://www.Compaq.com/pub/SoftPaq/sp64501-65000/sp64740.exe

• DVD burner does not recognize a DVD + RW

  I recently bought a DVD burner, after getting advice from Dell, to replace the original equipped DVD ROM (?) in my Dell Dimension 4500, so that I could record my video movies on DVD discs.

  The DVD burner, I was recommended is the ASUS DRW - 2014L 1 and this was provided by one of the "registered partners" from Dell. Unfortunately, this "Registered Partner" was useless, aggressive & dismissive to all after sales help or advice, where my request on this forum for assistance or advice.

  I had no trouble to record my videos on blank DVDs DVD - RW drives, but when you try to use DVD + RW discs (to use in my Sony Home DVD drive), the drive will not recognize them. Both the + RW & - RW discs are brand new Maxell disks, the RW - 1-2 x speed, single-sided 4.7 GB & the + RW 1-4 x speed, single-sided 4.7 GB.

  When there is no record of any type in the DVD drive, it shows in my computer as: DVD - RAM Drive (D). When a DVD - RW disc is inserted it changes to: CD Drive (D) with an icon of DVD - RW & this is also confirmed when I check on the properties.

  However, when you insert a DVD + RW and the DVD - RAM Drive (D) going to Drive (D) CD, as with the DVD - RW, no icon is displayed to indicate the drive is recognized, or it appears in the properties.

  As far as I can determine from the card, the ASUS DRW - 2014 L 1 is designed for both + & - DVD.

  I'd appreciate any help or advice... or am I just dumb?

  Thank you

  Tony

  Message edited by ozwald on 10/09/2008 02:36
  
  

• External CD burner does not recognize blank CD

  I have a new CD/DVD of Memorex burner that plays very well the prerecorded CD, but when I put in a blank CD - it seems that the blank CD is not recognized.  I've been reviewing newspaper and I see no evidence of an error.  The default current behavior when you insert a blank CD should be to open iTunes.  The focus to Itunes, but nothing else happens.  In addition, the CD does not appear in the Finder or on the desktop.  Once the CD is inserted into the optical drive, the unit eject button works like.  (It works well with prerecorded CD)  The only way to eject a blank CD's either reboot the computer or open the disk utility program and eject it from there.  Disk utility seems to be the only application that knows the blank CD - although he pointed out that the capacity is 0 KB and is unitialized, and partition map and the Smart function are indicated as 'not supported '. I tried with two different brands of CDR and get the same problem.

  Note that I have this problem on two new Imacs. The first is a machine of retina 27 "with 16 GB of RAM and hard drive with more than 2 TB of space remaining.  The other machine is an iMac 21 non-retinienne "with 8 GB of RAM and about 500 GB left on the hard drive.  Both machines are running El Capitan.

  It is the 2nd optical drive Memorex who gave me this problem.  I returned the 1st under warranty and has just received the replacement by mail unit this morning.  I contacted the technical support Apple, which were very nice. They took me through a SMC reset, but this has no effect.  Apart from them, they had no indication as to what was causing the problem.  I thought that I would try to write to you, geniuses.  Any ideas?  Thanks in advance.

  -david

  Contact Memorex. I think that you have to go back and buy something else that actually works with a Mac. 2 units in a row with the same failure seems unlikely. It is more likely that they are simple not compatible.

• DVD burner does not recognize blank DVD

  I had a TOSHIBA laptop since April, and since I got it, I have not discovered how to burn DVDs on this topic.

  I can watch DVDs and I can burn CDs, but if I insert a blank DVD, the laptop seems to recognize it as a CD.

  The reader certainly said DVD + RW rewritable, so do I haveto format the disk or something?

  Any help would be great

  see you soon,

  Martin

  Hello

  Before that you want to use on media DVD - RW try to format it before you want to burn files. If you have a problem please send us the description of the model. In this case, it is possible to find more information on the material of the unit.

• DVD burner does not recognize blank disc

  I am trying to burn a dvd - r with imgburn but the dvd player shows the dvd - r disc that I inserted is not empty, when it is.  I don't know that it is a software problem.  Any solution to this problem?

  Updated - the problems started when I did a windows update.  When I did the updates, the problem has been resolved.  Apparently, the initial windows update caused the problem.

• s parts, DVD, cd but DVD drive won't burn does not recognize any cd loaded into it?

  

  I want you to try the upper and lower filter thing (link below). Often, this fixes the problem with DVD burners recognizes only not DVD discs.

• Media player does not recognize my cd/dvd burner

  I use Media Player 11.0 on XP SP3.  The tab device recognizes my cd/dvd burner, but when I select the Recorder tab, it says: connect a burner and restart the player.  Any ideas why the burner tab does not recognize the burner?

  Mike. T.

  Hi Mike,.

  (1) don't you make changes to the Windows Media Player settings prior to this problem?
  2) are able to burn CD/DVD with your CD/DVD-ROM?

  Follow the steps in the link here and check for the issue.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Write to us if you are still experiencing a problem. We will help you.

• Windows Live Photo Gallery does not recognize my CD/DVD burner. How can I fix?

  I installed Live Photo Gallery (twice), but it does not recognize my CD/DVD burner, which works OK otherwise.  How can I fix?

  PCubedP

  Hello

  As the question is limited to Windows Live Photo Gallery, I suggest that you post the question on the link provided below for assistance.

  http://windowslivehelp.com/product.aspx?ProductID=20

• Microsoft does not recognize my external dvd burner.

  Microsoft does not recognize my external dvd burner.

  External DVD drives tend to require a driver for it.  Check the support web site of the manufacturer of the drive for details on how to install the player.

• Vista does not recognize is not my dvd burner

  Vista does not recognize is not my dvd burner when I inseret a blasnk dvd/cd it does not appear as a pilot

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Studio 1537 Roxio does not recognize DVD burner

  I have a Studio 2008 1537 with an 8 x Slot Load CD/DVD burner (dual layer DVD + /-in car and it was replaced under warranty about 2 years ago, but now Roxio does not recognize as a reader.)  I want to make copies of some videos, but I can't do it.  I think I need to update the driver, but I do not know what actual brand or DVD burner model number I.  How will I know?

  Roxio will be available for download on my Dell downloads. So go ahead and register, then download the installer and save it.

  You might want to try the upper and lower filter thing (link below). This can solve the problem of Roxio, but not iTunes issue.