Sdatellite L300 - lost Easy Media after Windows 7 upgrade

Similar Questions

• Cisco Media Player will not play my media after Windows 7 upgrade

  Last week I upgraded my operating system to Windows Vista Ultimate 64 to Windows 7 Professional.  I own a player DMP-100 which is directly plugged in my G from Linksys WRT54GS wireless router.  My computer is also connected to the router, so this problem is not a wireless issue, but it wouldn't surprise me if it turns out be associated with a.  When Vista was in charge, the DMP-100 router and Cisco Media Player is fine, although I had a devil of a time in the set up.  When I decided to upgrade to Windows 7 Professional, I realized because the BONES were inconsistent that the upgrade would eliminate all applications and I have to reload everything.

  When I rebooted Lela and the Cisco Media Player, I have none of the problems that I had with Vista in the configuration.  However for some reason, the program does not play my media files.  There is a default error message coming saying the Cisco Media Server can be turned off.  This is not the case.  More when I select a streaming radio station, the player, the server and software work fine.  I feel, but the server isn't really pointing to my library, the library opens upward in the software.  I unplugged and reset the player several times.  I also deleted and reloaded the server & software media a number of times.  I always get the same results.

  I don't like on radio stations.  I just want to be able to play my music and playlists. Anyone facing this problem before, and if so, is there a reason and a solution for this?

  (Mod Note: edited post for the respect of the directive.) (Thank you!)

  Eureka!  It's the firewall after all.  I thought I had everything checked when I added the AV Media Server and made sure the Cisco Media Player has been activated too.  Once I disabled the firewall and restarted, the press began to play as it should.  If something was definitely not right in the firewall.  It turns out that I was a fool and never saw the 'advanced settings' until I read about it in WIndows help (something I should have done at the beginning).  It was like a slap in the face.  Even if the programs were activated, there is no rule created for TCP and 8015 remote port.  It was clear as soon as I knew where to look.  I created a new outbound rule to allow TCP access port 8015, and the program worked as if it was never a problem.

  I want to thank you two people who have helped me through this and patience you while I flinched around this application and operating system.  It was a total exercise in frustration, but also that of the discovery.  I really appreciate your help.  I thank you and my audio system thanks you too!

• Cannot view full screen flash and silverlight media after Windows Update

  problems with flash and silverlight Muslim poor after windows update said updated the driver and will not play in full screen right.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  ===================================
  It might be worth a try to do a system restore to
  an hour before installing the updated video driver.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I lost my media for Windows Vista Business. How do I replace it?

  LOSS COPY OF VISTA BUSINESS STILL GOT MOOSE STICKER STICK ON COMPUTER NEED COPY OF OPERATING SYSTEM

  I had windows vista Professional installed on my computer, I lost my copy of windows. I have HP 4600 workstation had the partition recovery due to hard drive failure I lost that too. is it possible to get windows vista copy of the company I have Moose key sticker stick on my pc? Please help me I am desperate to use my computer

  Hello

  If Vista came preistalled contact HP and then ask to send you replacement discs.

  They do normally for a fee.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Read also:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&cc=us&DocName=bph07143

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• Portege M800-10V - creator of recovery after Windows 7 upgrade

  Hello

  I have laptop M800-10V protected, which was under vista. I buy an upgrade to windows 7 for my m800.
  first: how to reinstall the toshiba recovery tool creator to save it?

  2nd: the toshiba recovery partition is stay hide, but I don't know how or where is luncher it this function?

  Thank you

  Hello

  The creator of recovery disk can only be used on the pre-installed operating system, in your case of Windows Vista. After upgrading to Windows 7, you can t more use it.

  With other words disk recovery contains only Vista and you can create a new one with Windows 7. After using the recovery disk, you also have the Windows 7 upgrade disk.

• SOLVED! -Bluetooth not found after Windows 7 upgrade process - U350 only or other institutions?

  Man, I am hoping somone will be able to point me in the right direction...

  Anyway, has received Windows 7 Upgrade disks in the mail and decided to install them today because I had little time. Chose to 'upgrade' to the previous version of Vista (don't hate me for not doing a custom installation, 'clean'), and everything seemed fine, until I realized that my Bluetooth is not working (or even found in Device Manager).

  Run the separate drive Lenovo sent with the Win7 upgrade disk and made me worry more because the installation of driver told me that he could not find a Bluetooth device (which confirmed the same as Device Manager). Tried to download the drivers manually on the internet without success.

  Someone at - it ideas? The only possible 'factor' would be that I usually leave the Bluetooth in Vista, and when I ran the upgrade, Bluetooth was off I would have thought that Win7 would have seen the device anyway (regardless of the situation).

  Thanks to all in advance!

  Really should try to do a Forum search next time (instead of just google)...

  The answer to this was the Fn + F5 to ACTIVATE the Bluetooth module FIRST, before the system would see the in-camera. Once you actually turn, drivers can be installed according to normal... Thank GOD!

  CONGRATULATIONS to all the pioneers who have actually found this in the first place. Hope this was able to help some lost soul who has the same problem a few hours (and installs / uninstalls useless).

  Topic closed!

• Why can't I enter my upgrade key after Windows Anytime Upgrade on Vista?

  I bought the software update Window 7 Ultimate. I followed the instructions on the box:

  Click the Start button

  In the search box, type Windows Anytime Upgrade

  Click Windows Anytime Upgrade and clide enter an upgrade key.

  Yet, there is no link that says enter an upgrade key. There is only a link to the site Web microsoft talks Windows 7.

  I downloaded the Windows Upgrade Advisor. I did everyting that he told me to do. He checked that the computer was eligible for an upgrade (Toshiba Satellite running Vista).  I tried again with the Windows Anytime Upgrade again. There is still no link to enter the upgrade key.

  What should I do to get to the place to enter the upgrad key?

  Please note that there are no Windows Anytime Upgrade (WAU) for Windows Vista to Windows 7. There is only Windows Upgrade (WU) in which you need to buy a Windows 7 disc and upgrade of the key. You can refer to the link below for more information about upgrading Windows Vista to Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

• Satellite L300 - no response keyboard and mouse after Windows 7 upgrade

  Hi all

  After a new Windows 7 Ultimate installed on my PSLB0E L300, I lost the use of the keyboard and mouse pads.

  I did the installation with a usb mouse, who also now works. I downloaded all the drivers connected to my machine using the virtual keyboard, rebooted after each installed drivre, still does not.
  I also updated the BIOS, 1.3-1.5, still does not

  The strange part is that I can't access BIOS with F2, or sequence of starting using F12 at startup, navigate through the BIOS, so the keyboard works, but no longer works when Windows 7 has started.

  I tried to put all the defaults in the BIOS, no change.

  Help! >.< going="" crazy="" over="">

  Hello

  Have you installed additional drivers or tools for these external devices? If so you should remove, just check the software list in Control Panel.

  Normally the touchpad can be turned on/off with the FN + F9 key combination.

  In addition, it would be interesting to know what is happening on the factory settings. I mean the operating system preinstalled by Toshiba.

• Lost driver Bluetooth after Windows 7 restore

  I recently tried to upgrade my version of windows 7 to Windows 10.  The upgrade has failed, and Windows 7 has been restored on my hp laptop.  Given that this attempt to upgrade, I lost the Ralink Motorola BC4 Bluetooth 3.0 + HS adapter (Bluetooth Driver) that had previously been on the laptop.

  The error message I get States:

  Message file 'C:\Program Files\Motorola\Bluetooth\unins000.msg' is not found.  Fix the problem or get a new copy of the program.

  Can someone tell me the best way to restore the driver or get a copy of security of the program? Thank you

  Hello Sawyer,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  It is regrettable that the Bluetooth driver is lost after the restoration of Windows 7.

  However, I suggest you use the steps in this article and check if it helps.
  Reference:
  HP computers - the problems of Bluetooth (Windows 7)
  http://support.HP.com/in-en/document/c01590950

  Note: Please do not restore the system.

  You can also Download "Driver Ralink Bluetooth software" this link and check.
  Reference:
  Bluetooth of Ralink software driver
  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229457&swItemId=ob_110019_1&lang=en&cc=USC

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite L300 - beep after Windows 7 upgrade loop

  Hello

  I have the laptop next

  Toshiba Satellite L300
  Number of model PSLB8E - 15W007EN
  Serial 99086404Q

  I'm trying to upgrade to windows 7, it completed the process of installation, but when I boot, the laptop is a continuous loop off beep (sounds like she a loop of 22 beep... If that's any help), then shows a blue on the screen if you have installed new hardware, etc. So, I go to repair system that fails, please someone help me.

  Thank you

  Welshie

  Hi Welshie_1,

  These beep codes mean usually there is a hardware malfunction detected

  You can start in safe mode?
  Have you noticed the beep code when you go into the BIOS too?

  You can install Windows recovery disk Toshiba or you get a bluescreen too?

• Settings of Touchpad Acer R7 lost at startup after Windows Update 8.1

  I have an Acer Aspire R7-571. In mice, there is a tab for the momentum, which allows you to configure the touchpad, as follows:

  

  Where you can do things like turn off the tapping, set up scrolling, etc.. In Windows 8, it worked out fine; Since the Windows 8.1 update I find that all these parameters are lost each time that I reboot. To solve this problem, I open Control Panel and open the mouse. I still have to hit tab momentum - just open the control panel mouse Panel is quite suddenly revive all my settings and get the Touchpad works the way it is configured.

  I installed the latest drivers of momentum for drivers Acer site Win8.1:

  http://global-download.Acer.com/GDFiles/driver/touchpad/TouchPad_ELANTECH_11.6.27.201_W81x64_A.zip?a...

  Which erased all my settings, but once I went and set them up again and back on, the problem has been resolved.

• I lost Sound Recorder after Windows Update, I need to download again

  Original title: I have a new Acer Windows PC 7.__I rfunning have lost Sound Recorder and were informed by PC World, I need to download again.

  I was using Sound Recorder, when I had to abandon emergency program. When I closed the PC it started installing Windows updates and froze. When I restarted later I had to do it in safe mode to get the installation to complete. Subsequently, I found that for tape recorder desktop shortcuts worked more (which is usual when updates of Windows itself), but this time I couldn't find sound recorder again. I tried the box "search programs and files" on the search button and the search function of Windows Explorer. The program is not there.

  How to redownload it?

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstall XP after Windows 7 upgraded

  I installed Windows 7 Pro (upgrade) in dual boot with Windows XP (of course XP was required to install the upgrade anyway). Now, can I remove the XP partition (remove XP from the start with Easy BCD screen) to regain disk space?

  I know that if I ever need to reinstall Windows 7, I have to install my XP first.  In fact, I use True Image, so I guess I can make an image of the disk with W7 after the withdrawal of the XP and just use it if I have to start over.

  7 uses a "100 mg boot partition" and is accessible through the bcdedit utility. " You will want to remove the 'store' for the old installation

  Start on a DVD, "repair my computer" link opens the WinRE recovery menu. Command prompt:

  type: bcdedit and finding the right {GUID} of the 'old' install.

  following type: bcdedit/delete {long number}

  Your ability to 'push' the partition will depend on where the old partition is the disk, with regard to the partition of 7.

  I suspect that you would have to "crush" the xp with installation of second 7, remove the 7 installation first, remove the partition of 7 first installation and develop.

  You will probably need the option 'phone' to activate again.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Qosmio F50 - FN keys does not work after Windows 7 upgrade

  Hello

  After installing Windows 7 my 'FN' key doesn't work anymore. The big problem is the upgrade to Windows 7, I turned off my touchpad using "FN + F9". Now that my FN key work and I cannot turn my touchpad.

  Is there a way to reverse without using the "fn"? And is there a way I can fix my FN key? Accessible from start > all programs > Toshiba > utilities > accessibility does not work. Is somehow connected? What can I do?

  Feedback and assistance is greatly appreciated.

  Hello

  Here's a similar thread on the Qosmio F50 with Windows 7 issue where the don t FN keys work:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=184578𭄂

  If you must install the package of added value and utility to Support Flash Cards, but you must choose a version that is available for Windows 7.

• Pavilion dv6000: Pavilion dv6000 can't connect to the network after windows 10 upgrade from windows 7

  Need help; I have upgraded to windows 10 and my old laptop has given fresh life.  He hastened to start and stop, did not freeze the computer programs and internet was super fast.  Then it wouldn't connect all of a sudden, or even acknowledge all networks.  No internet is portable useless.  I researched and found that many had problems with card after the upgrade to windows 10, so I started windows 7 and have no problem connecting.  I had a glimpse of what was possible with windows 10 and I want it! can someone help me understand what driver I need to download it to a flash drive before moving on again to 10.

  Well, there is little hope for you, since you have an Intel wireless card.

  I have a HP nc6400 with the same card as yours and it worked very well on W10, and then he leaves suddenly.

  Not as bad than what you lived, but I had to keep restarting the machine and sometimes, it would be just the connection and would not reconnect.

  Here's what I did to solve the problem with mine, so I hope it will work for you too...

  I used this driver... a first on the list for 32 bit.

  https://Downloadcenter.Intel.com/download/22116/Intel-PROSet-Wireless-software-and-drivers-for-Windows-7-

  Then I changed some advanced settings for the card in the Device Manager.

  Here is a list type of Intel wireless settings and how to access.

  There are more settings on the link that we have for our particular model card.

  http://www.Intel.com/content/www/us/en/support/network-and-i-o/wireless-networking/000005585.html

  Here are the advanced settings, which I've listed for mine...

  Ad Hoc channel 802.11 b/g value = 11

  Mode of Ad Hoc QoS Value = active WMM

  Mixed Mode Protection value = automatically CTS

  Roaming Aggessiveness value = 1. The lowest

  Transmit power value = 5. Highest

  Wireless Mode value = 6. 802.11a/b/g