SDK 1.0.6 (FB4.5. only now) or is it SDK 1.1.0?

SDK 1.0.6 is released and works with FB 4.5.  However, the SDK release notes please refer to the current SDK like '1.1 '.

See:

http://docs.BlackBerry.com/en/developers/deliverables/21880/Product_information_1589456_11.jsp

Is 1.0.6 = 1.1, or there will be a new SDK version called "1.1"?

I do this with BlackBerry Java API as well. Replace:

http://www.BlackBerry.com/developers/docs/airapi/1.0.0/index.html

with

http://www.BlackBerry.com/developers/docs/airapi/1.1.0/index.html

I haven't checked the differences, but version above has not changed.

EDIT: Also check your PlayBook. OS 1.0.6 is officially released.

Tags: BlackBerry Developers

Similar Questions

  • I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

    I had two apple ID, but only now have access to one of the e-mails. When I try to login, it differs on the account that I no longer have access to. How can I change my information to my * account?

    < email published by host >

    As you know that these are user forums, it is not a good idea to post your e-mail address on a public forum - I asked the host to remove it.

    What "information" do you want to go? You can transfer iTunes downloads to another account, or to merge accounts - all downloads are permanently associated with the account that has downloaded (if only this account can potentially re-download purchases, downloads of updates of its applications, authorize such purchases on iTunes from the computer, and make in-app purchases in them).

  • I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

    I have more than music in itunes my ipod can hold, the last time I synced, there was a box to synchronize playlists only, now it's over so how can I now sync playlists only, you can see?

    Select the iPod in iTunes (click on its button on the device on the horizontal bar) to show its settings screen in the iTunes window.  The side left (in the sidebar), under settings, click music.  To the right, the settings screen of music from iPod, where you tell iTunes how to sync songs to the iPod.

    NOTE: All of the songs on the iPod that are not in your iTunes library (on the computer) will be lost.

    Check the box to Sync music (if it isn't already).  Below, choose the option synchronize playlists, artists, albums, and genres.  Below, under playlists, select (check) the playlists you want on the iPod.  You can also select other articles on other lists, as you wish.  Click Apply to sync your selection to iPod.

    Further, iTunes automatically updated the iPod with the changes made to the selected part of the iTunes music library.  For example, if you update a list of selected reading (add/remove songs), updates iTunes, the iPod with the same changes the next time you connect (or click Sync if already connected).

  • My iPad 2 Fresh Air only now at 96% or 80% do not know what is wrong

    My iPad 2 Air only now charges to 96% or 80% mean I need a new battery or is it possible that I can fix it, it's just more than a year

    Hi, even if your battery is very old it should load up to 100%. Try to reset hard! Or try to load while your iPad will turn off. If this does not help you then try to reinstall iOS through iTunes.

  • After that Windows update restarted as requested, by getting only now white screen

    After that Windows update restarted as requested, by getting only now white screen.

    Unable to set up windows

    I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

  • Office, Australia weather radar loops only now work on Internet explore

    Until recently, Mozilla enabled radar loops show on www.bom.gov.au but now only simple images are allowed. Windows 7 Professional with Kapersky intermediate security virus and this has not changed.
    Internet Explorer displays all these loops.
    What happened last week, or so to do

    This loop shows a sequence of images.

    You can try the following steps in case of problems with web pages:

    Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

    Is he missing pictures then make sure you are not block images from certain domains.

    • Press the F10 key or press the Alt key to bring up the hidden 'bar menu' temporarily.
    • Check the permissions for the domain in the currently selected tab in "tools > Page Info > Permissions.
    • Search for "tools > Page Info > media ' blocked images
    • Select the first link of the image, and then use the cursor key to scroll the list.
    • If an image in the list is grayed out and 'block Images of..."has a check mark, and then remove this check mark to unlock pictures of this area.

    Make sure that you do not block the (third) images, the permissions.default.image pref on the topic: config page should be 1.

  • I have disabled stereomix for use microphone only, now stereomix seems deleted?

    During tests ' configuration web streaming, n (took a while, so I don't really want a restore point) I have disabled the Stereomix, cos it seemed that he was in conflict with the microphone. But I disabled it only! Now it's gone-removed-cant find anywhere HP, made me DL software to analyze missing drivers, only to go back n say my warranty has expired. Can someone help to find a way to get the stereomix recording option to return, without a restore point. Who will still work? I may need to. Disappointed with HP, for making it harder than it needs to be, butits my fault. I do not see it in devices or panels realtek HD audio Manager control only has the microphone now. IM so angry. I only disabled, no warning came at all. Help please.

    Compaq CQ105TU / / 2.1 processor intel dual core / / 2 GB Ram / / 500 GB HDD / / old 16mnths.

    Thank God I found the driver. INSEAD take the option "HP" D/Lding their software through my PC to find missing drivers, I rather manually searched and found pretty easily. Unexpired warranty issues, but it was a large download. 115 MB. But Im very happy, I have an updated version, WITH my back to option stereomix. "sp54986.exe" to be exact. Happy happy happy. I shouldve persist before posting, but get frantic when HP ran me round in circles, after a few hours researching on my PC for the missing stereomix, always... It is a concern, only a simple disable, can do this evanescent Act on me. Or is it just hide it somewhere? I do not know. But I think it's really gone! Like me now, finally. To see it all. (Thanks sfa 4 HP)

  • HP Envy 5530: I replaced the black cartridge in my printer. She refuses to print in black only now.

    I ran all the standard tests. Black printing will produce only on cartridge color if used singularly. Print heads have been cleaned. Printer has updated its auto preset and no analysis of a printed item will be printed nor will be a printed document or the other. All prints have tried so far were in black ink. All worked perfectly until the change of the ink cartridge. Replacement cartridge used was a standard 301 HP black cartridge.

    Try here.

    http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882/document/c03765731/

    Let us know.

  • Req Roxio BackUp MYPC which will install on Windows 7. sp26942 says Vista only - now impossible to restore.

    Have a clean install of Windows 7 on my HP Media Center PC.  This has deleted all data, including programs from my hard drive.

    Before doing so, I backed up using Roxio BackUp MyPC 7 on a HP media drive.

    I copied sp25942 and tried to run to install the application on my hard drive.

    He said eligible for Windows Vista without any mention of Windows 7, but thought I'd give it a try anyway.

    Error message came to tell-

    Your system does not meet the minimum requirements for this update.

    Update has been canceled. (9998)

    Is there a version now available that works on Windows 7?

    Hello

    There is no update for Windows 7, but there is a way to run this software. Install WinRAR (please google it) and click right and on the sp26942 and extract it. Then, go to the source folder and run setup.exe

  • Why the subscription only now?

    Why the database subscription, only? Most people like me cannot afford to continue paying monthly subs

    . Sorry Adobe, I joined yesterday but be uninstall the program today and stay with my old Photo Elements11 shop

    I understand your pain - many users would like to see a perpetual license to CC option.

    You can also get this plugin to extend the functionality of the elements in the realms of Photoshop:

    http://ThePluginSite.com/products/elementsxxl/

    Or switch to an alternative like Photoline (www.pl32.com). For digital painting Krita (open source and free) is great. https://Krita.org/

    GIMP is also open source and free GIMP - The GNU Image Manipulation Program

  • Only now has no hard drive, Windows 7 Home Edition Premium is not validated on new drive - HELP

    How to validate Windows 7 HP OEM's version when I had to move everything to a new hard drive?  Thanks in advance.

    Ahh finely review messages.  I get notified of posts but could not see them.  I sent help

    Check your PM

    If it is still a failure, you are positive that you have installed Windows 7 Home Premium?

  • Hi, thanks for making me signed in - finally. Now, after the upgrade to the latest Firefox, I can not play videos. Addons &amp; pluginns all turned on and up to date.

    Hello
    I was struggling to connect to the support site yesterday and while this problem has been resolved, I was advised to upgrade to the latest version of Firefox from the system noticed that I was using an old. I was using Firefox 33 without major issues or problems at all. However I went ahead with the update, which gave me the 34.0.5 version. If good so far until what I went to play some of my regular TV series, I had followed with the previous version, only now he would not play at all.

    I know these TV series, comming from abroad might contain some harmful content to my machine or others, but I am well covered and as I say earlier they were playing fine in the previous version of Firefox. Just earlier the same day.
    

    I will be grateful if you could throw some ideas in this.

    Concerning

    J.Verano

    HI Juanverano,
    Is not a problem, Mode safe mode disables acceleration addons and hardware. If this continues and it is not an add on what will be the next step to try to disable acceleration:

    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    1. Open the Firefox Options (Preferences on Mac or Linux) as follows:

      • In Firefox 29,0 and above, click on the menu button

        then select Options Preferences on Mac or Linux, or Windows.

      • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
    2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
    3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    4. Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • Only get a gray screen after upgrade of El Capitan. What can I do?

    I tried to install an upgrade, but only now have a gray screen.  The installation seems to have stopped half way through.

    Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

    To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

    Step 1

    The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

    a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

    (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

    c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

    d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

    Step 2

    If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

    Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

    Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

    The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

    If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

    If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

    If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

    Step 3

    If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

    Step 4

    Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

    Step 5

    If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

    Step 6

    Sometimes, a startup failure can be solved by resetting the NVRAM.

    Step 7

    If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

    Step 8

    Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

    Step 9

    Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

    It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

    Step 10

    If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

    Step 11

    Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

    Step 12

    Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

    Step 13

    This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

    Step 14

    If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  • After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

    After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

    In the future more facts and less editorial help here

    SO now, we know all about how you feel but nothing on your system or your problem

    What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

    You cannot merge libraries without third party software - Photos of power can merge pictures libraries

    You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

    When you first launched the Photos it has migrated the last used for Photos iPhoto library

    I hope this will help, but to get specific answers, you need to provide real information and not feelings

    LN

  • Satellite M70-187 - recovery made a blunder in place now will not boot

    My Satellite M70 - 187 (PSM 70) has XP on its first Linux and Ubuntu partition on the second, GRUB, Linux boot manager, on the MBR.

    I made a blunder seriously - I just wanted to inspect the contents of the recovery disc, so I booted from it. I was expecting to see some sort of dialogue (he says: 'follow the instructions on the screen' on the disk), but instead apparently he immediately away without asking for any intervention by the user. Firstly, secondly it reversed order on a terminal screen lines, a few seconds later a graphic progress bar is appeared, labeled.

    At this point, I panicked - I had not saved correctly everything, and it looked to me he was already written back his picture over my data. So I hard - power the computer off. On reboot, it wouldn't find his BONES, he had nothing except a blinking cursor. In addition, a Ubuntu Live CD says that it could not mount the hard drive. Then, I stopped to do anything to not make things worse.

    I understand that I can probably easily 'recover' my PC using the recovery again disc, but can I still save my data first? I do not think that he had time to replace the partition data, maybe it only replaced the MBR. But what really that this in the first place, without any dialogue, without asking me? Or it was all well, if only I had been patient for a few seconds? Would it help even if I ran the recovery disc again?

    I understand there is also a recovery console from MS that is included on a CD of Windows and has commands like * fixboot * and * fixmbr * who might or might not be useful, but I realize only now I do not have + have + a Windows CD, given that the recovery disk is anything but that.

    I would really appreciate some help. I'm not at total loss - I have a backup, but as for users more semi experienced, it is neither complete nor perceive...

    I wouldn't change the MBR or any other thing at this point.

    Your best solution would be to connect the HARD drive to another PC and run the recovery software to scan the HARD drive and retrieve your documents.

    Google search for "format data recovery", there are many tools you can try.

Maybe you are looking for

  • VERY IMPORTANT

    I HAVE A PROBLEM IN MY MOBILE ITS 5s IPHONE I VISIT SERVICE CENTER IN EGYPT * BUSINESS LINE * THE has INFORMED ME THE BOARD has DAMAGE AND THE EXCHANGE WILL NEED CLOSE TO $ 500 BECAUSE I BOUGHT "SAUDIA" AND I don't have a PURCHASE INVOICE, AFTER THAT

  • Browser.sessionstore.Interval limits for Firefox 12

    I tried to change browser.sessionstore.interval for watching youtube videos, but it lags behind, so my question is what is the limit. Also in case you're wondering you can view troubleshooting information, so let me know?

  • El Capitan is compatible with a 2008 Black MacBook (4.1)?

    I recently tried to update an old, 2008 Black MacBook (4.1) for El Capitan of Snow Leopard. I received a message saying that I was unable to install... This model is compatible with El Capitan? I have 4 GB of RAM. Thank you.

  • Re - this copy of windows has failed the Windows genuine validation

    Hello I used windows xp - pro, recently I repaired my system because it was crushed and couldn't recover due to lack of space on hard disk. Hard disk is ful because the required software and MS updates took 18GB drive 'C' of 25 GB. After repairing, I

  • My e510 Dimension of networking

    I have a Dell Dimension e510 that I plan to use strictly as a media player connected to my TV HD of Mitsubishi. My office has Media Center 2005 installed and an ATI TV Wonder 650 card TV Tuner installed. I am running XP home like a BONE. I have a des