SE 8024008 error when you try to update Windows Vista 32 Service Pack 1 to Service Pack 2

Similar Questions

• Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

  The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 80248014 occurs when you try to update Windows Vista installing KB973768. Why?

  I tried to install KB973768 and got the error code 80248014. I tried to reinstall Svc Pack 1 and I was told that it was already installed. Then he told me to empty the Distribution of software/Windows/C I did. Now it not even will check for the updates. Now, I must go back and system restore I guess and then I'm back to Square One good blood! What the _ is it wrong? I have a HP Pavilion Windows Vista Home Premium on a 64 bit OS. I use Flash Player 10.0.45.2 and browser Firefox 3.5.7. Nothing seems to work, and in addition to that of the attached screenshots do get MS technology because it gave me a corrupt address! Help me please? And I don't have his bloody monitor. Reinstall all the drivers and software that several times and I've tried manual install of KB973768 several times without success! Thanks - K & K

  E-mail address is removed from the privacy *.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error when you try to update windows 8 for windows 8.1

  When you try to update my Windows 8.1 computer I get a message saying that it could not update if it has restored the previous version and give this code 0x800706BA - 0 x 20003.  I am very computer illiterate, but I thought I could do at least an update. before I could even try the update, he said that I had to uninstall my windows 8 provided with security tools. can someone please

  I received a reply on a different site, it worked for me and if anyone has this problem I hope it works for them.

  According to Microsoft, this occurs when "a facility to update plant":http://windows.microsoft.com/en-US/windows7/Windows-Update-error-800706BA

  "They also specify that the solution is to restart the system. Try this:

  1. Do a hard reboot (switched off, wait a few seconds, turn it on)
  2. After have connected you to Windows, run Windows Update and install the updates marked 'Important' and 'recommended '.
  3. Restart Windows Update asks you to
  4. Access the store Windows and try the upgrade to 8.1 Windows again. »

• Error message when you try to update Windows Vista - error attest 80070641 / 641

  I guess that many people have had this problem, all of a sudden.

  When you try to do updates on May 9, 2012, there were several updates available for me (23 in total).  I have windows updated put in place to notify me when updates are available (always have it) so I can see what will be installed (and not installed) on my machine.  He 11 successfully installed the updates and 12 in vain.  I try whenever I turn on my computer to update the 12 failed and failed in each attempt.

  For the record, I tried several remedies posted on this forum nothing is done.

  Attach it to the tool = failure
  System File Check = failure
  Update system = failure analysis tool
  Windows Update Agent = failure
  Stop the service (wuauserv), empty folder to update windows (C:\Windows\SoftwareDistribution\Download) files = failure
  Tried to install the other updates separate security updates = failure
  Tried to install other updates separate updates security = failure
  Other suggestions = failure

  I just do a fresh install of Vista 32 bit (with service pack 2) on a SSD to return the 15/03/2012. I update my registry every 2 to 3 weeks.  The last program that I've updated was Adobe's Flash plugin on 04/05/2012.  Before that, it was an update to AnyDVD is 30/04/2012.  The last program that I installed was a kit of expansion for the Sims 3 on 19/04/2012.

  This problem just happened out of the blue.  Never had any problems with updates like this before until 09/05/2012.

  Here's some of my windows update log file. Looks like I only selected 4 security updates and 8 others are not selected on the left.

  See that this related thread (in particular the JanetD post which includes what told him IOlo support)-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/getting-error-codes-641-and-80070641-when-trying/6022df1d-7914-4e3e-ac5e-dbef07df433c

  Otherwise, contact the IOlo Support yourself.

• Getting the 80070005 error when you try to update Windows for Vista 64 X

  Even if my computer is configured to automatically download Windows updates, it seems he never succeeded to date.  When I push an update, I get the error code 80070005.  I can't find a solution for this error.  Have no problem computer operating, except cannot get Easy Photo Print to Canon to work.  Whenever I try, I get this message: Thunking spooler APIs from 32 to 64 process has stopped working.  It will prompt you to get an update of Windows.

  Hi, Tom H7193,.

  You can read the following article and try the steps and check if you can install Windows updates:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  http://support.Microsoft.com/kb/968003/en-us

  Note: Applies to Windows Vista.

  You can also try to download the latest version of the printer drivers for Windows Vista 64 bit and check:

  http://www.USA.Canon.com/Cusa/professional/products/printers

  Hope this information is useful.

• Display errors when you try to update windows

  When I try to download my updates, it shows error. Computer is very slow to turn on. Can you help me with this?

  Donta

  First visit the MS website for this problem to
  http://support.microsoft.com/kb/818018/en-us .  This will allow you to run Fixit and give you information about other points to check.
  -
  Also check out this link to a MS engineer
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/multiple-Windows-Update-questions/9cbbbc9a-86cc-4fda-8E6F-b799353681fc#last
  -
  Other things to check.
  . Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps. Good luck.

• Error when you try to update Windows 7 64 bit - code error 0x8000FFFF

  Been upgraded Windows 7 very well since the purchase, but in the last few days I've met the above error code. I ran through most of the potential solutions (check the registry keys, checking the services running, disable AV software, rename the folder to download etc.), but nothing seems to help. Currently, I'm stuck with Windows 7 could not update from this point.

  HI -.

  Running "Run the Fix It" in aggressive mode seems to have done the trick. One thing to note - I also disabled Acronis True Image Backup Nonstop, who had run up to this point. If this makes a difference or not, I'm not sure. Whatever it is, the updates seem to work fine now.

  Thank you very much

  It's very interesting as the How to reset the Windows Update components? page specifically mentions that it is not expected for Windows 7 when I visit with my Windows 7 system:

  Advanced System

  This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you. Visit the Windows 7 Solution Center

  And, applies to , at the bottom of the page, do not include Windows 7.

  I have the feeling that the information on this page is incorrect according to the directives of Windows 7, which is not surprising.
  That said, it seems that Acronis was the culprit that caused the problem to update.

  A Acronis True Image Backup Nonstop running during the previous update was successful?
  MowGreen Services consumer safety update

• error when you try to update: "windows has not can find new updates, error code A 8024, 000.

  Original title : I can't update my computer... can anyone help me?

  I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

• DMI. EXE Application error when you try to reinstall Windows Vista

  I have a Toshiba A215 S7422 and I need to re - install Windows Vista.  When I try a complete reinstall, I get the message that there is a DMI. EXE Application and program error Stops the computer.  How can I get Windows Vista re-installed on this machine.

  http://laptopforums.Toshiba.com/T5/General-technology/A205-5814-DMI-exe-exception-error/m-p/23330

  Read the information in their Forums.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact Toshiba above the link for any problems with their software/recovery process.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• 800b0100 error when you try to update Windows 7

  I tried constantly to update my Windows 7, but in vain.  This error message constantly: "800b0100. Desire to get help and help me solve this problem without end.  Thank you.

  * Title *.
  Help needed to solve Update__ Windows 7

  This means that the computer had no protection of antivirus protection in real time for more than a week!

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows 7.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 8007371B error when you try to install Windows Vista SP2.

  Original title: error 8007371B.

  Trying to update SP1 to SP2 via updates for months now, but still get this error. Tried Mr. Fixit and all others. Can someone please.
  Vista 32-bit. Just instaleed new RAm as someone told me that this could be the problem (Crucial recommended). always the same

  Hello. I tried to update SP1 to SP2 for months now, but it still fails. I have tried everything I have asked me to do it through forums but the old thread about this error looking dated 2010 so hopefully someone might have a will.

  The error I get is ERROR_SMI_PRIMITIVE_INSTALLER_FAILED_ (0x8007371c). I ran the SFC tool that highlights errors. The SFC details txt that I could see it was mistakes it (copied below). The question is how can I fix it.

  2012-10-03 19:32:45, Info CSI 00000119 [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-10-03 19:32:53, CSI Info 0000011b [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-10-03 19:32:53, CSI Info 0000011 c [SR] this element is referenced by [l:146 {73}] "' Package_1_for_KB955020 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0.955020 - 2_neutral_GDR" "
  2012-10-03 19:32:59, CSI Info 0000011f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:38{19}]"nlslexicons000a.dll '; source file in the store is also corrupted

  Moved from feedback
  Windows version not specified

  Hi, GMC,

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the System File Checker tool cannot repair a file, follow these steps:

  1. To a high command prompt, copy and then paste (or type) the following command, and then press ENTER:
     takeown /f

     For example, type takeown /f E:\windows\system32\jscript.dll.

  2. Copy and paste (or type) the following command and press ENTER to grant administrators full access to the file:
     ICACLS/grant ADMINISTRATORS: F

     For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. Copy and paste (or type the following command to replace the file with a known good copy of the file):
     Copy

     For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  http://support.Microsoft.com/kb/929833#method3

  If you have already performed the emergency repair process and the computer still not working, it may want to make an upgrade of existing installation repair/site.

  Perform an inplace upgrade

  http://support.Microsoft.com/kb/2255099

• When you try to update Windows XP, I get the message: error number: 0 x 80245001

  When you try to update Windows XP, I get the message: error number: 0 x 80245001

  Hello

  If you have configured the installation of the automatic update of your computer, the computer downloads the files necessary for the installation of Windows updates in the background and records them in certain folders on your computer. During installation, these downloaded files are extracted by the requirement by the services of update running on the computer.

  The error you are getting means that some of these extracted files required by Windows Update have been damaged. Now, in order to solve the problem better, we need more information about the computer that has the problem. José asked a few questions about this computer in the first reply to your message, it will be very useful if you could answer these questions.

  Here is some important information that we need:

  1. What is the level of service pack installed on your computer?
  (Click the Start button, click run, type winver, and press Enter to know that information)

  2. what update failed to install with this particular error code?
  (Please refer to the method 1: search for the installation error code in the Windows Update troubleshooting tool section of this article to learn how to check your update history to find this information)

  In the meantime, you can follow these steps on the computer and see if that helps:

  Note: These steps will give the files associated with Windows Update in your computer. Perform these steps would be clear Windows Update history on the computer.

  1. click on Start, click run , and then type Services.msc in the run box and press ENTER. This should open the windows of Services for you.

  2. then find the following three services in the list of Services and stop them (by clicking on it and click on stop) one by one:

  Automatic update service

  (BITS) Background Intelligent Transfer Service

  Cryptographic services

  3. open Windows Explorer and navigate to the following location:

  C:\Windows\

  Rename the folder C:\Windows\SoftwareDistribution in SoftwareDistribution.old

  4. go to the following location:

  C:\Windows\System32\

  Rename the Catroot2 in Catroot2.old folder

  (be careful here, do not rename the C:\windows\system32\catroot folder, you must rename the Catroot2 folder only)

  5. now go back to the Services window and start the services of three you had stopped earlier.

  Now, close all open windows, restart the computer and try updates and install them. If it fails again, please answer with the information that we requested.

  I hope that the information I provide here helps you. If you still need assistance, we know. We are happy to be of assistance.

• Continually, I get an error when you try to update KB968930

  Continually, I get an error when you try to update the following: Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) I tried the solutions provided and it still does not work.  What can I do?.

  Both are optional, non-security updates - don't hesitate to hide them.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.