SE error message: printer could not be removed. Error 0x000006be"and new Kodak 7250 printer do not print
Original title: new Kodak 7250 printer print a vista computer
I'm trying to help my brother who lives in another State set up his new printer Kodak 7250. After you install the software it is plugged into the USB port. Vista has detected new hardware and did his thing, and everything seemed good. However, it would not print from the computer. The printer is listed and selected status, however, stated that it was not connected. We contacted Kodak tech, they take control of his computer. They have tried to delete the printer but could not... "Printer could not be removed... Error 0x000006be ". Tech said problem wasn't Kodaks and contact Lenova on bad print spooler. We checked the print spooler, which was running and in auto mode. We tried several times to remove the printer and start over, but shows the same error. Any help from anyone would be appreciated. BTW, her worn old HP printer had no problem.
Hi vbrown7,
You can try to let flow the Fixit and see if it helps:
Links:
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problems
Solve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
Also see the article and check.
Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
http://support.Microsoft.com/kb/946394
You can also check out the following link and try the steps suggested by Arthur Xie Microsoft, Moderator on Monday, June 1st, 2009 09:39
1. you use an administrator account?
If this isn't the case, then you should use the administrator account and check.
Also, try to create a new administrator account and check if the printer is able to be viewed / deleted.
Check out the link:
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Here's the situation.
First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.
Here are the solutions I tried, in and out of safe mode:
While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.
In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.
It Startin via msconfig did not work.
Tried to go through Device Manager, which is completely empty for some reason any.
System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.
I knew, but there may be malware, mutiple scans with several services did not find anything.
I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
I would like to ask you:
- You are running Windows 7 or Windows 10 on your PC?
- When was the last time it was working fine? Remember to make changes to the computer before this problem?
Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:
- Open the start menu and type "cmd".
- Right-click on the command prompt and click "run as administrator".
- Type the following commands and press ENTER after each.
DISM.exe / Online/Cleanup-image /Scanhealth
DISM.exe / Online/Cleanup-image /Restorehealth
After you run these commands, restart the system and check.
You can also view,
Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
https://support.Microsoft.com/en-us/KB/947821
If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.
Refer,
Hope this information was useful.
-
error message: "windows could not find a certificate to connect to the network.
My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.
Hello
Did you change your computer before this problem?
You can follow the procedure in the article.
Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
Alternatively, you can contact Netgear support to improve assistance in this regard.
Welcome to the NETGEAR support
-
Error message "Publisher could not be verified" received view downloads area
Original title: file mystery difficulty or remove?
In my 'view downloads box' I show something like "default_1795...". js', 545 bytes. Then an address like "cdn.fastclick.net" with the message "Publisher could not be verified. From far left, there is a red shield with a white cross inside. I know that's not good but I need to know how it is and how to fix the problem? I'm not the most knowledgeable computer user, but with a clear focus, I can handle the fix. Someone there haveany solutions/suggestions? Your help or advice is appreciated. Thanks in advance...
Hello
You must delete the browsing history and temporary Internet files.
Please follow the links and steps:
Method 1:
Step 1:
How to remove the content of the Internet temporary files folder: http://support.Microsoft.com/kb/260897
Step 2:
Delete temporary Internet files:
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files
Method 2:
Step 1:
Clear temporary files.
To do so,
Press on the + R alphabet Symbol Windows key to open the run box.
Type Temp , and then click OK.
Permanently delete all files.
Step 2:
Claire Temp data files of the app.
To do so,
Press on the + R alphabet Symbol Windows key to open the run box.
Type: folder and press OK.
Erase all files. (Note: some of them cannot be deleted, does not matter).
Step 3:
Clear Prefetch files.
To do so,
Press on the + R alphabet Symbol Windows key to open the run box.
Type: Prefetch and press OK.
Erase all files.
Method 3:
Scan your computer by using the Microsoft Security Scanner by clicking Download now:
http://www.microsoftsafetyscanner.com/
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps.
-
error message
Windows could not start the Bonjour service on local computer
Error 5 access is deniedI have Vista Home.
This prevents me to update I have tunes.
Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.
-
Impossible to format CD
Windows Vista Ultimate SP2 installed
When you try to format CD - RW, error message "windows could not finish this format.
Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.
Help?
http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
Burn a CD or DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use
Should which CD or DVD format I use?
See if help above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Otherwise:
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
I cannot open photoshop, I get the error message stating: "could not initialize Photoshop because the preference was not valid (it has been deleted)" nobody knows how to solve this problem? Thank you!
Hi malloryf,
Greetings!
Please reset the Photoshop preferences and try again.
Here's a similar thread: Re: preferences was not valid.
Concerning
Jitendra
-
I need an answer to be able to open a scanned doc (via my network printer) to my "Adobe Reader". Get a message "Adobe could not open" jpg image (4) because it is not a file type supported or has been damaged... "" "You are not sure if I really need Adobe acrobat program to open it? Get! $% ^ & * ing frustrated that this now has me consumed about 2 hours!
You can open JPG files with an image viewer.
-
I have Photoshop CS6 Extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty.
What I am doing wrong?
Thanks for any help
Bob.
How do you create the new layer? Looks like you have a selection and use ctrl/cmd-J. If you have a choice and it is empty, you will get this error.
-
Greetings,
I installed updates in my Windows 8.1 partition. Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours. I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered. I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5
How can I fix this without wiping the Windows partition and lose my software?
Thank you!
Have you created a Windows system restore point before the upgrade?
-
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
=================================
If it is a recent issue, of what it may be worth trying
do a restore of the system at a time before everything started.See the following article:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084 -
I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.
Shaida is my wireless modem.
How to fix this problem?
Before the resumption of connection Internet worked normally.
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/870702
It will be useful.
-
Unable to format the memory card, I get the message "windows could not format.
Original title: car micro sd problem
Hellomy laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.Hello
You are able to use any other memory card with no problems on the same computer?
Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.
-
When using adjustment layers, I get the message "adobe could not rasterize because pixels for this layer data are not directly editable" what's the problem?
This happens because there is no mask on adjustment and you have selected the Brush tool. You cannot paint on an adjustment. If the masks are not be created by default when you create the adjustment and you want that they be created, select mask add default option in the context menu of adjustments of the
-
Hello...
When my cc photoshop opens a message "extension could not be loaded because it was not signed." What is c? How can I solve this problem.
Please notify.
Thank you
Shaji
Hi Shaji,
You use Onone extension on your machine? If so, please follow the steps mentioned below.
http://www.on1.com/support/979135/
Please post on the Adobe Forums.
Maybe you are looking for
-
run dll error loading c:\nvcpl.dll invalid access to memory location.
I down loaded a game on the internet called kuma war and since this error appears. do you know why and can it be fixed. I don't know much about computers at all.
-
I have a 'My videos' folder that recently crashes when I open it. Any ideas?
-
What files can I move my C disk shrinking that my huge J part of my hard drive partitioned.
I know that I can move my multimedia files and I still do, but my drive C guard decreases, and I don't know why. I don't know what files it is safe for me to pass. Can anyone help?
-
I think that this error is related to my PlugandPlay Windows, but I can't figure out how to fix it. I have not seen this particular error appearing on the lists of any forum.
-
Windows 7 32 bit license key for activate Windows 10 64-bit
Hello I have a record of 32-bit windows 7 standalone and license (not related to any material) that I installed successfully on a hard drive, upgraded to 10 32-bit windows, and then did a clean Windows 10 64-bit installation and he remained registere