SE sec_error_inadequate_cert_type with private SSL Cert

Similar Questions

• SSL Cert automation tool

  Hello

  I wanted to vSphere update 5.1 to 5.5 and had problems with the standard certificates. So I decided to stop and first to replace now. We will generate certificates by our internal CA and spread with the SSL Cert automation tool.

  Read a few KBs I have two questions before you start.

  1. may I do the modification of certificates in production period or do I have to put something in maintenance mode and so I have to do this weekend?

  2. While the tool is running, I'm able to choose what services I want to update. When I choose "8" all services are selected. It doesn't matter if do not have all of them running. For example, we do not have the Orchestrator, but I don't know if we Log Browser.

  Thanks in advance

  Wolfgang

  Hi Wolfgang,.

  (1) you will need downtime that services are restarted a couple of times, also don't forget to close all dependent solutions (VMs should not affect but that managing the components are affected).

  (2) log browser is embedded in the Web Client, so if you have that installed you also Log browser

• Help with weird Vcenter SSL cert issues?

  Hi all

  We set up just a new Vcenter server with 2 ESX4 host.  Everything works fine, but when we loging to the DNS name of the server (virtual server) it invites for the SSL cert twice.  Once for the DNS name of the virtual server and a time for the IP address.  If we connect via the IP instead of the DNS name it only inspires us once.  We do not use currently an SSL certificate then just click on ignore twice, but it's a strange slow that I have not seen before and that he could use some direction?

  What is a DNS problem? or a problem / setting in vCenter.  Any help would be greatly appricated.

  Thanks again,

  Double guest is normal when VUM is enabled.

  In our environment, we installed the SSL certificates for main vCenter (without prompts for main VC) and then just installed/ignored these messages for VUM plugin.  The reasoning is that only a few admins will activate the Crossover plugin.  Most users have no need for this.

  If you do not enable SSL at all you can try this to switch them off at the vSphere client.

  You can right-click on your viclient--> properties--> find the target: on my system is "C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe.

  Adding a switch '-j' heard ' in the end do like:

  'C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Launcher\VpxClient.exe'-i Yes

  I understand there is no way to disable the vCenter level alerts.  This must be done at the level of the vSphere client or SSL certificates must be configured.  It is of course your call concerning the safety of your CA.

• Error replace the certificate SSL - inventory services with using SSL - please help automation tools

  I uses updated SSL tools to change the SSL to vCenter 5.5 certificate.

  Modification of SINGLE authentication certificate has been successful, but I'm having a problem with the inventory services.

  Error message below.

  ==================================================================

  4 update the inventory Service SSL certificate

  1. update the confidence of the inventory of Single Sign-On Service

  2. update the Service of Trust inventory to vCenter Server

  3 update the inventory Service SSL certificate

  4. back to the old inventory SSL Certificate Service

  5. return to the main menu to update other services

  The service chosen is: 3

  [Wednesday 3 December, 2014 - 13:49:12.88]: services that are delivered to market as part of thi

  operation s are: vCenter Inventory Service.

  Enter the location of the new inventory channel Service SSL: C:\certs\InventorySer

  vice\chain.PEM

  Enter the location of the new private key for the inventory Service: C:\certs\InventoryS

  ervice\rui - orig.key

  Enter the SSO administrator user (default value is: administrator@vsp)

  here.local):

  Enter the SSO administrator password (not displayed):

  [.] The supplied certificate string is valid.

  [Wednesday 3 December, 2014 - 13:49:44.41]: last update of functioning inventory Service SSL cert

  ificatsanitai re has failed:

  [Wednesday 3 December, 2014 - 13:49:44.42]: unable to determine if the inventory Service is registe

  Red with Single Sign-On - errorlevel is 1

  =================================================================

  Problem solved, as the vCenter my share of the same SSO domain environment is necessaio that certificcado the backend SSL is changed.

• ASA5505 inscription on SSL cert error when applied to the interface?

  Created a CSR, gets the certificate files, the downloaded ASA505.   Three certificates in the CA certificates; the one in the certificate of identification.  Everything seems all just wonderful.  "Now use the SSL certs: in trying to associate the certificate with the Interface in the SSL settings section, we get an error"

  [OK] ssl encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  [ERROR] ssl trust-point ASDM_TrustPoint5 outside
  Trustpoint are not registered.  If please register trustpoint and try again.

  The cert will appear in the drop-down selection, why the error?  How do I delete it?

  Hi Stewart Buswell,

  I have seen this problem when starting the CSR request through the CLI by using the configuration of the terminal of registration and then going to the ASDM and adding the identity certificate without using the command crypto ca enroll through the CLI.

  In this case, if you use the CLI/ASDM you can follow this guide:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  And the way to solve this problem will be generation a new CSR on the ASDM using the same key pair and install the certificate on this trustpoint. After you apply the cert to the ssl, you can remove the old one which was not.

  Hope this info helps!

  Note If you help!

  -JP-

• vRops SSL Certs

  Hello

  So, Ive recently rolled out an 8 node vRops enviromnemt and finally had the time to ask the authority of internal certification signed SSL Certs, I created them, convert their PEM format, downloaded 1 cert, had look ok, then did the 2nd node, verified and it looked ok, I then checked the node 1, who pointed out a mistake and said there the same SSL certificate as the crux of the 2nd.

  Now I need to check that documentation does not seem to say that and not see anything on the web it is clear either.

  VROps is the SSL certificate of the same SSL certifiate for each node for an enviromnemt?

  If so what I need to create a single SSL certificate and a subjectAltName for each node intot he asks cert.

  which means that I have put an article like this in my openssl.cnf

  [v3_req]

  subjectAltName = @alt_names

  [alt_names]

  DNS.1 = vropsnode1.internal.domain

  DNS.2 = vropsnode2.internal.domain

  DNS.3 = vropsnode3.internal.domain

  DNS.4 = vropsnode4.internal.domain

  DNS.5 = vropsnode5.internal.domain

  DNS.6 = vropsnode6.internal.domain

  DNS.7 = vropsnode7.internal.domain

  DNS.8 = vropsnode8.internal.domain

  IP.1 = 192.168.1.1

  IP.2 = 192.168.1.2

  IP.3 = 192.168.1.3

  IP.4 = 192.168.1.4

  IP.5 = 192.168.1.5

  IP.6 = 192.168.1.6

  IP.7 = 192.168.1.7

  IP.8 = 192.168.1.8

  see you soon

  John

  The documentation is really poor in this area. but I got this VMware"one certificate will be used by the web server on all nodes, so to do the certificate must be valid for all nodes.  One way to get there is with multiple subject Alternative Name (SAN) entries".  So looks like im on the right track.

  Which is kind of weird, but works as that said, when you look at the certs ssl free signed that they have different names vc-ops-slice-1, vc-ops-slice-2 etc. but then you download an SSL certificate cert of the same is on all nodes.

  Update: Ive had an SSL certificate generated with the subjectAltName as in the example above with the full domain name and IPs for each node in the cluster and created the imported and appropriate to this PEM file, it works and the certificate is valid on all the nodes, this is the solution.

  Also of the impact, that is the question that vRops Government itself to vCenter with the IP address and not FQDN, the SSL certificate needs the IP address, but in my case it causes also connectivity issues in browsers because of our proxy settings, so it must be considered if his need...

  • vRealize extension of Operations Manager is saved using the IP address instead of the DNS name
    By default, vRealize Operations Manager saves its extension with vCenter using the IP address of Operations Manager and not the DNS name vRealize. Users who click on open vRealize Operations Manager tab monitor vCenter open a URL based on the Operations Manager IP address vRealize and not the DNS name.
    Workaround: To allow the registration of the name vRealize Operations Manager with the DNS name extension, follow these steps:
    1. On each node of the cluster of Operations Manager vRealize, follow these steps:
       1. Starting the console, open the following file in a text editor.
          $ALIVE_BASE/user/conf/configuration.properties
       2. Add the following line to the properties.
          extensionUseDNS = true
          Note: You can go back to using the IP address by changing the property to false.
       3. Save and close configuration.properties.
    2. Connect to the Operations Manager vRealize management interface and restart the cluster.

  John

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• CSR SSL Cert for remote Web Workplace

  Customer shall execute a certificate SSL for Remote Web Workplace and asked me for the Certificate Signing Request (CSR) information for the domain. I searched help and knowledge that they can't run their own SSL and now you're wondering how to move forward?

  T Hey I need to use Remote Web Workplace, which runs on a sub domain

  Looking for an answer on how my client can use their position of remote Web Workplace and have their site hosted on BC?

  Remote Web Workplace is a feature of Microsoft Windows Small Business Server and Windows Home Server 2011 medium-sized product company, Windows Essential Business Server, that allows existing users to log into a network front face of the small Server Edition-Professional family interface-based.
  
  After logging in to Remote Web Workplace (using their Windows domain user name and password used), a user can access enabled features of the Small Business Server or Essential Business Server, such as Outlook Web App, the viewing of SharePoint pages and (if a machine is running and allows him to) full remote control of client computers connected to the network to the server.

  Off-site access
  Remote Web Workplace is a feature of Windows Small Business Server, Windows Home Server 2011 and Windows Essential Business Server that allows access to users to facilities when they are offsite such as email, reading/modifying shared calendars and remote controlling a machine as if they are sitting in front of IT.
  
  Connection options
  When you connect to Remote Web Workplace, users can choose their connection speed which then optimizes the characteristics of the connection. The options are: Small Business Network (Intranet), broadband, modem of 56 Kbps and 28 Kbps Modem.
  
  Means of access
  The Remote Web Workplace is a Web application and is accessed through a web browser. To control remote computers, a user is required to install a "ActiveX desktop remote control" in its web browser once and only Internet Explorer is supported.

  
  

  Please and thank you!

  Short answer (to date) you can not SSL certs on BC... so you can't generate CSR

• vSphere 4.0U2 to 4.1U1 with the SSL certificate has expired?

  I want to upgrade our vSphere vCenter server and ESXi 4.0 4.1 U1 U2 hosts, but my vCenter SSL cert has expired.  If this cert has expired a negative impact on the upgrade?  Will be the upgrade of mint a cert again for me?

  If the cert has expired will not harm the upgrade, in order to obtain a new certificate in place, it would be better to do it now or wait until I'm in 4.1 U1?  I expect to use free signed certificates.  Thank you.

  the expired cert will not affect the upgrade. It is advisable to do the update/change certs after that you are on 4.1U1.

• Upload to FTP with TLS/SSL in Muse

  Hello

  I am trying to download a site to an FTP server using TLS/SSL. Personally, I don't know what means TLS/SSL.

  I was able to connect to the FTP with Filezilla and Transmit site because I had the option "requires explicit FTP over TLS" on "FTP with TLS/SSL" and Filezilla on Transmit.

  Is there a preference in Muse where I can connect using similar settings?

  I use version 6.0 build 751, CL 776980

  Mac version 10.8.4

  Mac Pro 2.8 GHz Quad-Core

  7GB 1066 Mhz DDR3

  Thank you

  Brandon

  Built-in FTP download of muse does not support protocols secure right now. Feel free to add your vote as a comment to this idea - http://forums.adobe.com/ideas/2009.

  Thank you

  Vinayak

• Overloading a package with private procedures

  Hi all
  
  Is there a probelem if you overload a package with private procedures?
  In other words if I have two methods named as in a package, of which none is declared in the pacakge specification? It seems that I always overloaded a package with public procedures.
  
  Thanks for any help,
  Bradley

  I can:

  SQL>CREATE OR REPLACE PACKAGE test
    2  AS
    3    PROCEDURE test_public;
    4  END  test;
    5  /
  
  Package created.
  
  Elapsed: 00:00:00.00
  SQL>
  SQL>sho err
  No errors.
  SQL>CREATE OR REPLACE PACKAGE BODY test
    2  AS
    3    PROCEDURE test_private (num IN NUMBER)
    4    IS
    5    BEGIN
    6      DBMS_OUTPUT.PUT_LINE('number: '||TO_CHAR(num));
    7    END test_private;
    8
    9    PROCEDURE test_private (str IN VARCHAR2)
   10    IS
   11    BEGIN
   12      DBMS_OUTPUT.PUT_LINE('string: '||str);
   13    END test_private;
   14
   15    PROCEDURE test_public
   16    IS
   17    BEGIN
   18      NULL;
   19      test_private(1);
   20      test_private('a');
   21    END test_public;
   22  END  test;
   23  /
  
  Package body created.
  
  Elapsed: 00:00:00.01
  SQL>sho err
  No errors.
  SQL>
  SQL>exec test.test_public
  number: 1
  string: a
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.00
  SQL>
  SQL>select * from v$version;
  
  BANNER
  ________________________________________________________________
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for Linux IA64: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  
  Elapsed: 00:00:00.04
  SQL>
  

• Problems with linux SSL connection to iaas hosts agent (cert.pem exists)

  
  IAAS server is 2012R2

  I am unable to get my Centos prompt in SSL handshake with my server iaas.  Windows Journal: a fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is at 1205. [Newspaper axis sea may 13 at 11:32:02 2015] [info] [client ssl] Client certificate chain specified filenot [sea may 13 23:32:02 2015] [error] ssl/ssl_utils.c (153) error in the SSL engine [sea may 13 23:32:02 2015] [error] ssl/ssl_stream.c (108) error in the SSL engine

  Any ideas?

  https://support.Microsoft.com/en-us/KB/2973337

• Muse site with SSL cert question...

  I have a SSL on my site of Muse, but the url still shows once http and https. How to display ONLY the secure url? Thank you!

  Hi Michael,

  SSL certificates can be added on the server side and not in the Muse. Using Business Catalyst to host the site?

  Kind regards

  Akshay

• Wildcard SSL cert on ASA

  Is it possible to use a wildcard on a SAA SSL certificate? In other words, instead of getting a specific cert with the FQDN of the ASA, we would use the emitted wildcard cert?

  Absolutely, it is particularly necessary in environments of ASA vpn load balancing. When you connect to a FULL domain name which translates an IP load balancing, one of the ASAs will make a http redirect to its individual host name, your browser (or AnyConnect) will attempt this connection and ASA must have a certificate for this specific host name. Have a certificate wildcard on all the ASAs solves this. I've got this running on several clients.

  If you need help with setting up, let me know.

  You can generate keys private on the SAA (and later export it to another ASA or other devices other than cisco), or you can import a certificate with existing wildcard characters with the private keys (to the PKCS12-BASE64 format)

  Kind regards

  Roman

• Problem with Provisioning profile/Cert EPCO

  With the help of EPCO to develop mobile applications for the possible deployment of iOS.

  Tutorial apps work fine when deploying to iOS Simulator.  We get an error when you try to deploy on iPhone to test.

  Created and downloaded a Provisioning Profile:

  • Program for developers joined Apple
  • On the Apple Developer site, created and downloaded a certificate
  • Created and downloaded a Provisioning profile (including the Apple Dev site shows as 'active')

  Set up preferences of Eclipse:

  • Eclipse / iOS provisions Mobile: Mobile provision file pointed
  • Titled Application ID
  • Indicated in the certificate
  • Points of Configuration iOS deployment target debug (iTunes (for device to deploy))
  • Debugging of points in the Provisioning profile.
  • NO designated ipa files

  During debugging, the application is generated successfully.

  Then, the build will fail:

  * ARCHIVES COULD not * Code sign error: no commissioning found matching profiles: no provisioning profiles with a signing identity valid (certificate and private key pair) have been found.

  Anyone know where to start to understand this?

  Thank you!!

  OK - finally figured it.  It's simple...

  The cert and the configuration files were OK - no problem.

  It turns out, I didn't have the Deployment Bundle Id named correctly.  It must match the application identifier 'right '.

  So - I just edited the deployment application ID and put the com.ourcompanyname.  before the name of the application.

  That's all it took.

  Thank you-