Seamless roaming with EA7500 + RE7000 the two AP work?

Similar Questions

• Table 1 d with rejection of the two consecutive points

  Hello

  I have table 1 d with 10 measuring points. I treat points in pairs and according to the difference between two consecutive points, I have decision weather the two points must remain in the table or should be rejected. For example, my 1 d table looks like this: 10, 20, 30, 35, 40, 44, 50, 51, 60, 69. I calculate the difference between consecutive points by pairs: 20-10 = 10, 35-30 = 5, 44-40 = 4, 51-50 = 1, 69-60 = 9. I would like to reject the table points with the value of the gap less than 2. In my case, the points are 50, 51 and the table after the rejection should have 8 items and look like this: 10, 20, 30, 35, 40, 44, 60, 69. What is the most elegant way to do it? I'm in LabVIEW 8.6.

  Thanks in advance!

  Review your original message and your example to better understand your stated requirements.

  "I treat the couple points."

  You have to take into account only the pair of 1st and 2nd point, then don't take into account the point of 3rd and 4th pair so on and so forth.

  Never consider the 2nd to 3rd or her never consider the 4th to the 5th, so on and so forth?

  What is your table? If it is very large (1000000 points), you may need to consider other options for the use of memory and speed.

• Conditional highlighting with checkbox in the two cells by the numbers

  I have two columns.

  Check boxes, the other contains text.

  I want to apply formatting conditional for text, based on the checkbox (true/false) value.

  Hi Bebaj,

  Add another column (C in this example). You can hide C when everything works.

  

  Formula in C2 (fill down)

  = IF(A2,B2,"")

  A tick in a check box inserts the value of B in C, another "" (NULL)

  Conditional highlighting in column B

  

  Kind regards

  Ian.

• message to the subject of the defective hosts SMTP and HTTP, with regard to the two reading: 'No. Socket Error 11001 error number Ox800CCCOD. »

  To set up my Outlook Express, questioned, by sending an e-mail with the download, to provide the above hosts "addresses", I have inserted the wrong information ignorance.  Now cannot send and open downloads, I try to access the page in question again and RE-ENTER the RIGHT "addresses", but all in vain.  Can someone help me to access this critical page, I could revisit the functional plan online?  PLEASE?

  Open Outlook Express, click the Tools menu, click accounts, click Mail, click Properties, verify each tab and enter the correct information. If you don't know, your ISP will give you the correct information.

• I can't fix my mouse to use the option with a single click in windows 8. The two click works fine, but I prefer the one click option

  With Windows Vista and Windows 7, I put the mouse to use the option with a single click to open files and programs desktop.  I can't find this option in Windows 8.

  Hello
   
  Thanks for the post about Microsoft Community.
   
  I understand that you don't want to use the simple click instead of double click of the mouse that you used in Windows Vista and 7.
   
  I would ask you to please follow the steps below to activate the option just click on the button of the mouse in Windows 8.
   
  un) Please move the cursor to the bottom right and click on the search box, which is the first option in this Panel.
   
  b) in the search box, type Control Panel, and then click Control Panel.
   
  c) after opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. Click "appearance and personalization".
   
  d) now click on the folder option to open it.
   
  e) now you will see many options in the folder option. Now, click single-click to open an item (point to select).
   
  f) now click on apply and ok to turn this feature on your computer.
   
  I hope your problem is solved now. Please feel free to write back if the problem still persists.

• With regard to the income from work

  Hello
  
  In accordance with our client process, work is not chargeable to their client. There is therefore no 'recipe' according to the Type of expenditure of 'work '. So why is it mandatory to select the category "recipes" of the LOV in the window Types of expenses.
  
  Could someone please explain on this topic.
  
  Thanks in advance,
  Lanaud
  
  Published by: Lavan is June 15, 2009 04:22

  Hello

  I could explain the reason for the source :)
  Origin of Oracle project billing has been a model of invoicing for consultants. They couldn't imagine, down, then a situation as you describe.
  .
  Now for the companies.
  We have a category of income called 'Other', which is linked to all types of expenses that are not billable.

  Dina

• Join the two trees connect by prior Start With and return only common records?

  Oracle 10g Release 2 (10.2)
  
  I have two tables which have structured data. The results, when running queries individually are correct, but I need to join tree a tree two to get only the common records between them.
  
  -Trees a
  SELECT ip_entity_name, entity_code, hier_level, entity_parent
  Of ip_hierarchy
  WHERE hier_level > = 3
  CONNECT BY PRIOR Entity_code = entity_parent
  START WITH entity_code = "MEWWD";
  
  -The two tree
  SELECT ip_entity_name, entity_code, hier_level, entity_parent
  Of ipt_hierarchy
  WHERE hier_level > = 3
  CONNECT BY PRIOR Entity_code = entity_parent
  START WITH entity_code = "IPNAM";
  
  
  If I understand correctly, the joints can not work with CONNECT BY / START WITH queries?
  
  A WITH clause is an option?
  
  If possible, I don't want to put a selection in a database to display object and join against other queries.
  
  Thank you.

  Hello

  jtp51 wrote:
  Oracle 10g Release 2 (10.2)
  ...
  If I understand correctly, the joints can not work with CONNECT BY / START WITH queries?

  Before Oracle 9 it was true. Since you're using Oracle 10, you can if you wish; but I'm guessing that you don't want in this case.

  A WITH clause is an option?

  If possible, I don't want to put a selection in a database to display object and join against other queries.

  Yes, a WITH clause that is an option. Viewed online, as Zhxiang has shown, are another option. Either way gives you a regular display effect without creating a database object.

  You did not show a sample and the results, so no one can tell if a join is really what you want. Other possibilities include INTERSECT or an IN subquery.

• How to read a counter value for the separation of the two edge before meter is stopped by the second edge (6602 Council)?

  I use a timer/counter with DAQmx 6602. I use the separation of two - available via DAQmx cash edge. Count between the two edges works properly, however I do not know how to read the value of the counter during the counting operation (i.e. after the first edge triggered the beginning of the count, but before the second edge triggered the end of the counting). I'll have to wait for the second goes off the edge of the end of the countdown until I can get a counter value. I need to be able to access the current value of the County during the count operation. This was possible in traditional DAQ. How can it be accomplished using DAQmx?

  Ah shoot - I was afraid that this might be the case (for what it's worth, my series of X returned intermediate values, but the material and the underlying driver are quite different)...

  You just need to take one measure at a time or you are buffer several measures of separation of the two edges at the same time?  So just to take one measure at a time, you can set a task of edges of count using the database internal time as the source using an arm start trigger (first edge) and a sample of clock (second Board) to work around the problem.

  Best regards

• The two blackBerry Smartphones, Slacker Radio and Pandora do not work

  OK, so a few days ago I was listening to the music of the Slacker Radio App and everything worked but there was absolutely no noise, so I just let go and used the music on my SD card. When I got home I restarted Slacker and there was still no sound, so I went to www.slacker.com and I found their support customer and I spoke with one of the people who work at the lazy and he had me do a battery pull - still no sound. then I uninstalled lazy and rebooted my storm and when it did reboot I reinstalled slacker - still no sound. then he had me send some logs of the Slacker app to see what they could find, and I still nothing back.

  So today, I decided to try Pandora radio and there is just no music when he has to play. I'm completely out of ideas, I know that's not the speaker because the storm music player works perfectly

  Okay, stupid question... on the device, you use the phone's speaker, or the speaker (by ear).

  If one does not work, try the other.

  Try to connect your earphone or headphone?

  No matter what? We determine where the sound does NOT come from.

• EA7500 and three RE7000s - seamless roaming

  Hello

  My current setup is 4 different old (all with ethernet wiring) wireless routers to get coverage in all of my house. There are a lot of walls in concrete and insulation where 4 routers. The problem I have is that I have quite often disconnects and reconnects as my move of one router to the other devices.

  I want to do is get an EA7500 and three RE7000s. Each of the RE7000 will have a wired connection to the router that will also have a swich next to additional ports.

  My question is the transparent roaming will (802.11r / k) knit between access points and router in this situation? Happy to make the investment if it will work, but I want to confirm this first. I saw messages with a RE7000 and a router and some with a RE7000 as an Extender and the other as an access point. All mine would be connected acccess points.

  I posted this in the channel of wireless routers, but if it is better placed under access points please let me know.

  Thanks in advance

  Thank you guys!

• Roaming with two Cisco WAP551

  Hello

  I am faced with the installation of an office with two Access Points Cisco WAP551 wireless.

  The two access points will be connected via PoE to a Cisco SG200 - 26, which is also related to wired devices and the internet router.

  The end customer is also willing to reach for customers roaming wireless with one THAT SSID broadcast in the Office; This means that only one SSID is visible by wireless devices, and which move around the Office connectivity is managed automatically by the second WAP if first becomes too far, without loss of connectivity.

  This behavior is possible with these devices and if anyone can give some suggestions key on the WAP configuration?

  Thank you

  Lucio

  EDIT *.
  I moved the post in the section of the small business that I didn't notice this before section.

  Depends really. Since it is a soho device, they are not very strong on the technical department. I guess your also with a PSK? I also assume that you generally do web surfing and no voice. If your WLAN is identical and the customer will get the same subnet I would give it a try. I think I'm going to work. Make sure your RF cell recovery is good. If this is not the case, your roaming and performance may not look pretty. For what is good, I mean in the middle where the two aps meet they should be low 70 or more. With regard to the terms fast roaming. Which is usually mentioned when you make 802. 1 X security and roaming from ap to ap. Yet once again, I assume you are psk.

• I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions?

  I have 2 copies of open Firefox (two different windows with lots of tabs), if I reboot can I restore the two sessions? I am familiar with clicking history / restoration of previous session, but do not want to reboot to let windows update to do it's thing unless I can restore the two sessions.

  guigs2 said

  If they run different profiles, then Yes.

  Thanks, but I use only 1 profile. However, I found the answer! If I restart/turn off / down pc WITHOUT closing a firefox session, he will come with the screen 'well, it's embarrassing"and list the TWO sessions to restore. The trick is not not to close before stopping! If you close them first, then you can only restore the session first (?).

• I can't send mail to one of the two accounts of e-mail with the outgoing server.

  Recently, I was unable to send an email to one of the two accounts which are the two aol. One of them is netscape. They both use the same outgoing server 'smpt.aol.com' I've tried the suggestion to remove the password on behalf of netscape (the one I can't send). Now I get a 5.7.1 sender address rejected. I'm sure this is a settings problem and probably a dealing with passwords, but I just can't solve. Help!

  I checked both accounts and servers as you suggest. The first time he asked me, he said that have been rejected. When I pressed try again, it has been accepted, and now everything seems to work fine. Thanks a lot to you two. I really appreciate it.

• With 2 monkeys roaming network connected to the internet

  Hello

  My apologies if this has been discussed (I did some search but did not find anything useful). I have the question realted following a change in my network topology:

  current installation:

  -Cable modem is connected to the WAN port on my Time Capsule (3 TB Tower). Transport CANADA acts as DHCP unit (modem is silent, that is without router)

  -Port LAN of the TC is connected to the WAN of the MONKEY #1 via CAT6 Ethernet port.

  -MONKEY port LAN #1 is connected to the WAN of the MONKEY #2 port

  -Port LAN EPA # 2 is connected to the WAN of the MONKEY #3 port

  -all the monkeys (the latest models of Tower) Act in Bridge mode, but create a WLAN.

  I like that, a roaming welll workign network throughout the House.

  New installation / planned:

  -J' changed from cable to fiber to the home. So now I have a new box of fiber that offer Internet via 4 Gigabit Ethernet ports.

  -The new fiber box is physically located between the TC and the #1 MONKEY.

  -without having to pull a new cable in the box of fiber for the TC (for feed on the Internet in the beginning of the string), I was thinking about this:

  -1 Ethernet cable from fiberbox to the TC and feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

  -Switch the TC using the Bridge so that the fiber box making the DHCP

  However, now the TC is is more directly connected to the chain of the EPA.

  QUESTIONS RELATING TO THE:

  -I'll always be able to have a mobile network, or I will with 2 networks, i.e. 1 created by TC and 1 piloted by monkeys?

  -all Clients on the network will see always shared devices (printer, for example) on the network?

  Thank you very much for your expert advice on this.

  Rgds,

  Sascha

  -run 1 Ethernet cable from fiberbox to CT...

  -Switch the TC using the Bridge so that the fiber box making the DHCP

  It should work.  (See Note below)

  feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

  It should work. (See Note below)

  However, now the TC is is more directly connected to the chain of the EPA.

  Since the TC is connected to Ether even switch on the product of the fiber to which EPA #1 is also connected... TC and AE #1 are, indeed, also linked together.

  I'll always be able to have a roaming network

  Yes

  -all Clients on the network will see always shared devices (printer, for example) on the network?

  Yes, assuming the fiber box works properly.

  Important note... Your plan to have the TC and the MONKEY in Bridge Mode expected to work... BUT... Apple has another idea on how a mobile network should be configured. See the information on a roaming network in this Apple support document:

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

  More precisely... Apple will tell you to connect an Ethernet cable from the product of the fiber to the WAN on the TC port and set the TC for managing DHCP and NAT... just as it does now.  Then... all the rest would be put in place just as you have it now... with a connection Ethernet between a LAN port on the TC to the WAN on EPA #1, LAN on EPA to WAN on EPA #2 #1, etc..

  If you follow the advice of Apple... you'll get an error Double NAT on your network... Apple who will tell you to ignore. How well your network will work with a Double NAT problem is open to question.

  I don't recommend to follow advice Apple... just pointing out that Apple has different ideas and interesting on how to do things, which sometimes goes against the traditional rules of network management.

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.