Search table
Hi all
I have a problem regarding research table.
Looks like it's impossible to find some items in the table 1 d that I deliver to me.
Because it returns-1.
I have attached my vi + the file
Koen
You can not do a comparison for equality with numbers with precision floating point. This is just a limitation of floating points in General (all computer languages have this problem). What you need to do is rather check if a value is in a certain range to take into account this limitation.
Tags: NI Software
Similar Questions
-
Search table for 0 or 1 throughout the course of
Hello. I have a column of data with 530 000 lines. The only values are a 0 or a 1 (1 represents the occurrence of an event; 0 does not work). I would like to be able to determine the amount of 0 seconds between each consecutive occurrence of 1 throughout the whole picture. For example, I would be able to determine the number of zeros (e.g., lines) between the first and the second 1, the second and the third 1, third and fourth 1, etc., and then determine the average. Using 1-d search function array makes it easy enough to do for a few instances, but I can't find how to search in all the lines of 530 000. Thanks in advance for your help.
MattStock1984 wrote:
Forgive my ignorance, but implementation of a reading of the worksheet with an indexed table leads to a constraint on the U8 function point and my average output is the size of the array (e.g., length of string). Can you tell me where I'm wrong? I have attached a sample data file that I use.
- Nothing wrong with coercion. (However, I told you to convert in U8 in my instructions to your table of preparation)
- You have not added 48 as in my code. Why not? (If you add no 48, your delimiter must be defined as a character unprintable special (x 01), making it difficult to read code. (Also, if you do not add 48, the character '1' (ASCII 49!) will never happen and you get the full length as expected).
-
Hello
I have a problem with the attached code. Search d 1 table doesnot findout the index number of an existing element. But the reverse does not work well. In other words, it can findout the element corresponds to an index number. I enclose the vi and the txt file where I need to read and research.
Please answer...
Thank you in advance...
Chassey - Sengupta.
R - click on the item and the sub-table and replace '-' code and you will see the problem. Your text file has 4 places at the end. If you add those to the element it you can find items, so that it works as expected.
/Y
-
Hi all
I have a table 1 d of numbers that goes from 255 to 0, I want to seek a first element which is less than 100 and retrieve the index.
Can someone help me how to on this subject.
Use the same ideas. Throw a column in the table at the same time. Search. Repeat steps.
The more 'complex' part of this program is interfacing with the excel worksheet.
-
Hello
I need to create the MySapce page.
When we enter the table name must return the data tables N conlumns editable dynamically.again, we enter a different name in the table
It displays data coreespndoing coulmns N tht table names.
NY body help me on that.
Thank you
Nani ;)Hi Nani,
You develop search page to be developed VO and table dynamically.
You can see the JDevelop guide to generate the table running, if I do something I will update this topic later.
Kind regards
Out Sharma -
TRANSITION SEARCH TABLE AND COUNTY FROM HIGH TO LOW
I have 4 entries to dig. I want to count the number of times where each individual entry passes up and down and display the number I have attached the vi as v11. Thanks for any help.
Hello Jootbox,
Do you by any chance a cDAQ chassis 9181?
If you are, it might be a good idea to use the 4 meters internally available on this chassis.
A simple example on counting the edges can be found here:
-
Is there a way to search in a table for the first item that is less than a specific number? - As the function search table but by comparison instead of equals?
Thank you
I don't think that there is a direct way.
A simple option: first make your comparison (you can compare an array to a scalar), this will result in an array of Boolean. Then search for 'True' in the table of Boolean.
-
Need help with search 1 d table
Hello
Why I always get-1 for the 1-d array of search here? Join my vi
The goal is to get rid of digital repetition & store if not repetitive.
Thank you and best regards,
Simon
LV8.2
I'm not sure what you want to achieve, but your search table returns the index of the search for the number. However, you're looking for once for every time in the table and the last time, you will start the search for the last item, so always-1.
Is the idea to add digital to the table if it is not already present? Then, it is too complex (and does not).
These changes would solve it?
/Y
-
Site search using several database tables
I am able to search my site for certain keywords using a single database table for example I can search for the butterflies using butterflies search table list. However I would like to have a global search for all types of wild animals on my ex of site from visitors to the homepage can search all species with the word Green in the name. If the search function needs to look at a range of tables, for example floralist; fungilist etc. I have problems with the sort code - I'm a bio-scientist a programmer so any suggestions would be appreciated.
Here is my code for the search using a single table:
<?php if (!function_exists("GetSQLValueString")) { function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") { if (PHP_VERSION < 6) { $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue; } $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue); switch ($theType) { case "text": $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL"; break; case "long": case "int": $theValue = ($theValue != "") ? intval($theValue) : "NULL"; break; case "double": $theValue = ($theValue != "") ? doubleval($theValue) : "NULL"; break; case "date": $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL"; break; case "defined": $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue; break; } return $theValue; } } $colname_search11 = "-1"; if (isset($_POST['species'])) { $colname_search11 = $_POST['species']; } mysql_select_db($database_cjwebsite, $cjwebsite); $query_search11 = sprintf("SELECT * FROM `moths searchl ist` WHERE species LIKE %s", GetSQLValueString("%" . $colname_search11 . "%", "text")); $search11 = mysql_query($query_search11, $cjwebsite) or die(mysql_error()); $row_search11 = mysql_fetch_assoc($search11); $totalRows_search11 = mysql_num_rows($search11); ?>
followed by:<div class="results"> <?php do { ?> <ul> <li><a href="Insects/Moths/species.php?id=<?php echo $row_search11['id']; ?>"><?php echo $row_search11['species']; ?></a></li> </ul> <?php } while ($row_search11 = mysql_fetch_assoc($search11)); ?> </ul>
My address is www.hebridensis.co.ukThank you
Christine
Hi Chris,
If the fields are basically the same for all the tables, seems, it would be better to merge them into a single table of "wildlife" and add a field "category", in this way you only ever have to query this table even if several categories are added, each record would have a unique id, and you could open up opportunities to do research with no dependents drop-down menus (i.e. a drop down menu allows the user to select) a category and then will fill up with the category-based species).
It wouldn't be too hard to create the new table, but I wonder how many other elements of your site could be affected by the change.
Hope this helps,
Greg
-
Create and search the tables and apply the style
Hello
I am very new to scripting. I want to learn the basics like creating a table, creating anchored frames, frames of related texts, etc..
Now, I want to create/search tables in a document, and I want to apply styles. I saw a script to do this. When I paste the Extendscript CS4 script, as the program crash.
The crash of the program in part 1. When I create another script with only part 2 (see //part 2) then there is no problem.
What I've done wrong? And can someone tell me what part 1 of the script do?
Thank you
Part 1
using your version; I prefer return 0 if table not found
function findTable (obj) { }
while (obj.constructor.name! = 'Table') {
obj = obj.parent;
if (obj.constructor.name is 'Application') {
throw 'Can't find table'
}
}
return obj
}Part 2
var myTable = 0;
if (app.documents.length > 0 & & app.selection.length > 0)
myTable = findTable(app.selection[0]);
check at least enough lines for 1 row from the top, 1 body line, row 1 down
if (myTable! = 0 & & myTable.rows.length > = 3) {
/ / remove all the rules; INSET value 0
myTable.cells.everyItem () .appliedCellStyle = "[None]";
/ / format row down
/ / (do not forget the lines use count 0-base)
a = myTable.rows.length - 1;
myTable.rows [a].cells.everyItem () .appliedCellStyle = "" 4.cell_body_last"";
/ / format stored
first = 1;
last = myTable.rows.length - 2;
for (a = first; has < = last; ++ a)
myTable.rows [a].cells.everyItem () .appliedCellStyle = "" 3.cell_body"";
/ / format the top row
a = 0;
myTable.rows [a].cells.everyItem () .appliedCellStyle = "" 2.cell_header"";
}Part 1 provides that the text cursor to be anywhere inside of a table - in ordinary text, either with a cell, row, column or all of the selected table.
He walks 'up' with his mother until he comes to the purpose of the table itself.
This will work only if the text cursor is anywhere within a table. It does nothing when you're somewhere else, and it only works with the table 'ongoing'.
-
Table of comparison and research
Hallo
I compare a data entry and the ideal data. so far, I understood how to do comparison but the problem create when ideal table have the same element with different respective value, dat same of entry are also seems to be the same, but everything by doing research in the final output in the 3 column table looks different than it should be.
hope you understand my problem
thanking you
BR
Karine
Search table stops his research when he met a first similarity. THST the reason you get 500 for all the "E" s
I joined a project. There are always elegant ways to do what you want to achieve.
-
I have two paintings like these
Table 1 table 2
a 1
a 5 a
b 2 b
c 3 f
d 4 g
e 5 h
f 6
g 7
g 10
h 8
h 9.
with what I have now, I can create a table that lists the matching elements
Results:
a 1
b 2
f 6
g 7
h 8
However, it does not save the two sets of a, g, h, only the first instance. Someone knows how to fix this?
Any help is appreciated
A loop inside another loop FOR FOR should do the trick. Have the index of auto outer loop on the parameters of search and index of auto inner loop on the search table. On a match, add this element to the list.
-
A record in the table is not approved
We have a PS4100x Equallogic in production. A few days ago one of the drives has failed and we ordered an original Dell HDD for this device. When we replaced the damaged for a new, the console says that the disc is not approved.
We checked the documentation and cannot find that this happens when there are questions of firmware when the drives are not original (who from not Dell) and not alike.
The other thing is that when I try to add to the table, the "Add table" option is gray out.
Any help would be grateful, thank you!
Hello stamac,.
I'm sorry, but only Dell Equallogic brand work readers in a table EQL. It is custom firmware on the drive on which the search table. There is no work around for this.
Kind regards
Don
-
You are looking for individual characters in table
I want to search this inuputing a table or two, or three letters. If a string in one or more of these letters, I would like to know what channel it is.
I tried this and is first time around works but but it grows reselts the search table every time. How to do a new search every time? Also, I am looking for the search results to get a more accurate result.
var myArray:Array = new Array;
implement a multidimensional array that contains data
() myArray.push
["alligator", "ant", "bat", "bear", "beetle", "bird", "bored", "buffalo", "bug",
'Rabbit', 'camel', 'cat', 'centapede', 'chicken', 'chicks', 'chipmunk', 'cow ',.
"Crow", "deer", 'dogsbig', 'dogsmall', 'duck', 'elephant', 'fish', 'fox', 'frog ',.
"Giraffe", "giraffebaby", "goat", "goatbaby", "gorilla", "Marmot", "hamster"
"hippo", "horse", "Iguana", "Kangaroo", "kitten", "Lamb", "lion", "lizard."
"monkey", "Butterfly", "mouse", "OWL", "pig", "pigeon", "Puppy," "raccoon", "rat."
"rhino", "Rooster", "sheep", "skunk", "snake", "spider", "squirrel", 'star of the sea', 'Swan,'
'Tiger', 'Toad', 'Turkey', 'Turtle', 'Walrus', 'whale', 'the Wolf', 'Zebra']);
myArray.push (["beer", "coffee", "espresso", "juice", "soda", "tea", "water", "wine"]);
Here we have set up some properties on the object array to contain the string of our research and our results
myArray.myResults = [];
search_btn.addEventListener (MouseEvent.CLICK, mouseHandler);
function mouseHandler(event: MouseEvent): void
{
myArray.myTarget = input_txt.text;
/ / gives us now the word search
myArray.forEach (multiSearch);
//show results
Print();
}
This is the function that does all the heavy lifting...
multiSearch feature (element: *, index: int, array: Array)
{
see if we have a match in this table and in return pass its index
for (var i: * in the element)
{
If (item [i] .indexOf (array.myTarget) >-1)
{
var tempArray:Array = array.myResults;
tempArray.push ([index, i]);
array.myResults = tempArray;
}
}
}
all code below is OPTIONAL... This is just to show our results
in the output window in Flash to let you know it worked...
var printArray:Array = myArray.myResults;
var search: Array = new Array;
function print (): void
{
for (var i: * in printArray)
{
ReSearch.push ([myArray [printArray [i] [0]] [printArray [i] [1]]]);
}
trace (ReSearch);
}
I don't know what you're trying to do is very convenient, but for academic reasons here's one code that works and which is more effective based on the feature you sketched out:
var myArray:Array = new Array; // set up a multidimensional array that contains some data myArray.push(["alligator", "ant", "bat", "bear", "beetle", "bird", "bore", "buffalo", "bug", "bunny", "camel", "cat", "centapede", "chicken", "chicks", "chipmunk", "cow", "crow", "deer", "dogsbig", "dogsmall", "duck", "elephant", "fish", "fox", "frog", "giraffe", "giraffebaby", "goat", "goatbaby", "gorilla", "groundhog", "hamster", "hippo", "horse", "iguana", "kangaroo", "kitten", "lamb", "lion", "lizard", "monkey", "moth", "mouse", "owl", "pig", "pigeon", "puppy", "raccoon", "rat", "rhino", "rooster", "sheep", "skunk", "snake", "spider", "squirrel", "starfish", "swan", "tiger", "toad", "turkey", "turtle", "walrus", "whale", "wolf", "zebra"]); myArray.push(["beer", "coffee", "espresso", "juice", "soda", "tea", "water", "wine"]); // here we set up some properties on the array object to hold our search string and our results myArray.myResults = []; search_btn.addEventListener(MouseEvent.CLICK, mouseHandler); function mouseHandler(e:MouseEvent):void { myArray.myTarget = input_txt.text; // reset search results myArray.myResults = []; // now we call the search myArray.forEach(multiSearch); //show results print(); } // this is the function that does all the heavy lifting.... function multiSearch(element:Array, index:int, array:Array) { // see if we have a match in this array and pass back its index for each(var value:String in element) { if (value.indexOf( array.myTarget) > -1 ) { array.myResults.push(value); } } } function print():void { trace(myArray.myResults); }
-
Search Widget - Broken in German Photoshop featured
Hello
I use the German version of photoshop sc4 and the problem is, that the function Search Widget will not work inside photoshop. It works just fine in the Configurator, but at the time I am exporting and open the Panel in the search field of Photoshop brings no results.
Y at - there a Posibility to put widgets "search table" for menu German orders?
By the way: I love the idea of having a kind of "quick search panel" in Photoshop (I wrote this as a request to feature some time ago!)Yes, it works very well!
(On a Mac, you must ctrl-click on the "Configurator" application icon and choose from the context menu - 'show package' (I think it's called so in the English version).) You will find in the "featureSearch.xml" under contents-> resources)
Maybe you are looking for
-
How are you able to print on labels Avery?
-
I have an ipad with ios 9.2 air2 and I can't split to work and get a white handle to drag on. I don't have any white handle at all no matter what applications I use same apple installed apps like safari, notes or notes and calendar. I restarted the m
-
I had to reinstall the sofftware for Photosmart HP 7520. That wiped out neat interface to iser "HP". People said that it's over. What is an interface neat as "HP" indicators to be? Interactive m portable computer. Where are all the flowers?
-
Good results printing from my office? (HP Photosmart 7520)
I tried to print from windows, hp creative suite and adobe photoshop Photo Viewer. Tested tons of different configurations and wasted a lot of ink and paper, but no matter what I do I can't get my air photo prints as well as they do when I print (sam
-
How can I recover deleted files doc
Mr President. I accidentally removed an important document of my office, from office. Is there anyway that I can get back the same. It has been removed the 8th of this month.