Second battery charge no more than 29% on Portege R200

Hello

I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

Thank you much in advance.

Hello

Looks like a malfunction of the battery to the battery performance and life is limited
After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

I think that you should simply replace the battery with a new and check if it helps to solve your problem!

See you soon

Tags: Toshiba

Similar Questions

  • It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong

    Whenever I plug my charger into my iPhone more 6 seconds I get a pop that says this accessory may not be recognized and will not take a charge. It is the charger supplied with the phone. But my iPad charger is more than 2 years works great on my phone. What's wrong? And why won't my charger. I also have another charger at work that the phone recognizes even plug me the charger in but that works well on a co-workers phone. Suggestions?

    Help here > power adapters using iPad with iPhone, iPad and iPod - Apple Support

  • Tablet not charging no more than 5%

    Looking for some advice... my tablet is only 4/5 months old and has recently stopped more than 5% of charge, even if it remains cool during the night

  • Why a second 8 video lasts more than 30 hours to render?

    Hello. I'm trying to restore a MEP (several projects editor) party and for some reason when I make, it takes more than 30 hours. I watched all the videos on Youtube and I found no solid solution to my problem. Is this normal? Also, I have 3D enabled for this project and I'm currently trying make this video a second at a time. Even in this case, a second takes more than 4 hours to do. If you have more questions, please tell me. Thank you for reading .

    You try not to use tracing, you?  You should not.  You must instead use C4D Lite.

  • Advanced Port Replicator III more compatible with the Portege R200

    I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

    Will be

    I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
    So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

  • Tecra A7 - Battery charge no more

    Hello

    When it connects to the laptop to power alternative, the battery, the led is yellow.
    After several hours, the LED goes out. However the battery still shows 0% load...
    Now I would like to know what is the problem here, it's the battery or the charger?
    Your help would be very appreciated.

    Thanks in advance and best regards,
    Peter

    > Now, I would like to know what is the problem here, is it the battery or the charger?
    Are you able to use the laptop connected to the power adapter?
    If so, then the adapter is OK and I would say your battery is defective.
    In this case, you will need to replace the battery.

  • IPad pro cable loading safely able to charge phone more than 6 s.  I noticed that it is thicker than the iPhone cable

    MY pro iPad charging cable is thicker than the iPhone cable loading.  It will damage phone if I used it to charge the phone

    the thickness of the cable have no impact on the load so not

  • battery charging is more

    No matter which plan to choose, my battery is no longer the power cord is connected.

    My battery is no longer when I plugged in the power cord.  I changed the power management to try to resolve the problem.  I checked to make sure that all parts of the power cord are plugged in all the way.

    Hello

    Control Panel control - plan change Options - power plans - power - advanced settings
    Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
    long to load).

    Here are some tips to help and troubleshoot battery issues.

    Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
    eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
    them and be careful). Batteries are old, or it could be a problem with the computer.
    Check with the support of the machine system, and many of them have on line forums.

    New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
    However on a laptop that not extend their life a lot. Best is to use the a/c adapter
    When this is possible.

    I use the free version of BatteryBar to monitor my battery. Click on the green button on the
    Yellow box on the right side of the page to download the latest stable version.

    BatteryBar - free version available
    http://osirisdevelopment.com/BatteryBar/index.html

    Another good program

    Vista battery saver - free
    http://www.codeplex.com/vistabattery

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    You can also check with the manufacturer of system and forums that many use their own
    proprietary software to monitor the battery and they could be known problems with your battery.

    ============================================================

    Try this - to make a Restore Point

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
    (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
    Stacks.

    Problems with the lives of its use and the battery of power - Mr Fixit
    http://support.Microsoft.com/GP/windows_battery_power_settings

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Apple Watch without charge for more than 1 month.

    So I have not loaded my Apple Watch in 1 month, and when I tried to load, I loaded 3 days in a row and it still won't turn, no, it is not the charger, I tried force restart with digital Crown and side button and still nothing, then I was stupid enough to cancel the twinning of the Apple Watch with my iPhone thinks it would work somehow , and now I can't reset it, so dumb. I can't connect to iTunes either, I'm so lost and confused, I just had this Apple Watch for about 2 months for my birthday and I don't know what to do. I have tried every thing on the web to force reboot to restore the entire Apple Watch. Please if anyone knows, please tell me, literally I am desperate for your help, thank you in advance.

    Hello

    Given the steps you've already tried, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

    Contact - Support official Apple

    https://Twitter.com/applesupport

    http://www.Apple.com/retail/Geniusbar/

  • Why use my original USB cable charger for more than a year now is startig to show a sign that it is not compatible with the device? o

    I used without problem my USB cable for over a year, it is original Apple and yesterday began to show a sign that it is not compatible with the device. How can not be supported if it's Apple.

    This can occur if the cable is damaged in any way. See: recharge your iPhone, iPad and iPod touch - Apple Support for more information.

  • WMP 12 albums on entry each time charging takes more than 1 hour to load

    I uninstalled and reinstalled according to the suggestions on the internet without success.

     

    Hello

     

    Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

    Windows Media Player takes more time to load the albums.

    This can happen due to the interruption of some third-party programs.

    I suggest that you put the computer in a clean boot state and check if the problem persists.

    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

    See the mentioned site:

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

    Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

  • my computer will expire in 60 seconds if inactivity for more than 60 seconds how to extend the time feature

    model #7-1039 [information removed]

    Hello

    Open windows control panel, open personalization, click on the link of the screensaver on the bottom right and in the next window, set the time to "wait" to a more acceptable figure and Remove the tick box "in»the logon screen curriculum vitae  Click on apply, then Ok to save the setting.

    Kind regards

    DP - K

  • HP Envy - battery - charge only to 50% (brand new!)

    • Model: m6-1225dx
    • SKU: 7703056
    • HP - ENVY 15.6 "laptop
    • Windows 8

    Hello! I hope someone can provide some guidance. I have seen a lot of useful information on these cards, especially on this issue, but I think mine is a bit tricky...

    I bought a new HP Envy Monday (today is Wednesday) and I noticed that the battery is charged at 50% (the battery icon, when you go over it, says 50% load)

    I found this curious, because I got the battery plugged for more than 8 hours.

    I made sure the strings have been correctly connected, removed and added to the battery, etc.. I found some additional information and checked the battery HP using HP Support system, and he says that the battery must be replaced. This test is accurate? I have to really replace a battery for a laptop brand new?

    Should I try another test before asking for a new battery? Thank you in advance for your help!

    -M.T.

    Hello

    It certainly seems that the machine comes with a defective battery, so my best advice would be to return the laptop (not only the battery) to the retailer you bought it and get a replacement.

    Best regards

    DP - K

  • HP ENVY laptop - 17 t-s000 CT: replacement of battery charger adapter

    I would buy a second battery charger adapter, but I can't find it on the HP website.

    Hello @wellsoberlin,

    Welcome to the HP Forums!

    I read your message that are looking to buy a replacement adapter and tried to help you.

    You should be able to find a compatible replacement for your system adapter to HP PartSurfer.

    Please let me know if that solves the problem by marking this post as accept as a Solution.

    Thank you!

  • HP Photosmart all-in-one is showing offline on PC & online on printer & install more than once.

    • My smart Photo printer all-in-one HP give me 2 problems, one is listed as the question for help several times.
    • It is when I add the printer & PC discovers that she, it will print the 1st time that show offline, although showing online on the wireless printer.
    • I wanted to try to change the IP address as suggested, but don't know how to do this.
    • In the second place, he moved more than once on my PC?
    • It lasts for a long time, I have a warranty & can share the printer, but I don't think that something is wrong with the printer. Thank you

    Hello

    See the Article and follow the steps

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&cc=us&LC=en&DLC=en&product=1141647&tmp_track_link=ot_search#N4724

Maybe you are looking for

  • Verification code

    I forgot to verification code me. How to find it or replace it?

  • Re: Satellite 5200 701: unknown device in Device Manager.

    Hello. It WinXP Pro + SP 3.In the display devices, such as an unknown device manager. Try all of the pilots, who were on a disc with the laptop, nothing helps. Give the solution!

  • ITunes does not recognize when the Ipod is connected. Help

    I have an ipod classic and only recently (Christmas 2015 day) itunes has ceased to recognize when my ipod is connected to my laptop. However, I know I tried three cables work because the ipod screen shows that it is connected and my laptop opens the

  • Skype not to pick up the sound of the microphone in Vista

    I'm tryingto use Skype and it is not picking up all the sounds.  How can I activate the microphone? * How can original title - I activate the microphone? *

  • Migration of vCenter

    I did some research, but could not find anything.  I'm on vRanger Pro 5.2 connection and I was wondering if there will be complications of my vCenter upgrade to a new server?  I'm upgrading to vCenter 4.0 to 4.1 and it is not going to a new server.