Second camera for SX80

Can you SX80 connect two Cisco TelePresence precision 60 cameras?

and how?

I can't find the information in the documents.

Jet,

Yes, definitely 2 precision 60 camera can be connected.

When you want to control the camera, please connect any mute switch to the number of Ethernet 2 or 3 on SX80 port and connect the camera to the switch. There are 4 ports of entry and therefore 4 camera can be connected to the SX80.

Please note the answers and mark questions as "answered" as appropriate

Tags: Cisco Support

Similar Questions

  • Second battery for camera SW450

    I can't find something or someone who knows something about this device, except there is no email for her support. I just want to buy a second battery for when the camera needs to be replaced. He learned to be as bad as getting a law passed by Congress. You would think the parts department would have one, but are all in that they deal with computer. I can not even find out where on the site of what the camera is if I wanted to buy another one as a gift. I did not, but he is missing, like the dinosaurs. This site is about as organized as a teenagers room. Unable to find anything you are looking for.

    Robert Dodson

    Enjoy life. There is plenty of time to be dead. -Anonymous
    The two most common elements in the universe are hydrogen and stupidity. -Harlan Ellison

    Hello

    Any store of good photography should their stock, or you can try this:

    http://www.camera-battery.com.au/s/digital-camera-battery/HP/sw450/?gclid=CNaJka_HsK0CFSJLpgodIAydlQ

    Kind regards.

  • Maximum camera Presets supported for SX80 precision 60

    Hello community,

    How many presets camera on SX80, we can create using the precision camera 60?

    SX80 version TC7.3.2.

    Thank you.

    According to the Guide of API TC7.3 SX80is 35.

    xCommand Camera Preset Store
  • OfficeJet Pro 8620: Part number for second paper for Officejet Pro 8620 tray?

    I'll try to find the good second tray paper for this printer.

    Some documents quote Ref CN548A HP and others quote A8Z70A. The two look alike, and both refers to the range of 8600.

    I bought the CN548A and 'almost' fits, it doesn't seem to work

    Anyone able to help?

    Thank you

    Hello @petertow,

    Welcome to the Forums of HP Support!

    I would like to help you with the correct information for the second paper for your HP Officejet Pro 8620 tray accessory e-all-in-one printer location today.

    • Good reference for the paper tray number is: A8Z70A

    The CN548A paper tray is only for the printer HP Officejet Pro 8600. The Officejet 8600 series came out before the HP Officejet 8620 and the 8630 printers series. Therefore, the tray is not universal.

    I wish you good luck going forward with this!

  • Connection of third-party cameras Cisco SX80

    Is it possible to connect any third party camera Cisco SX80.  I'm looking to plug pregnant vaddio Auto Trak 2.0 camera to the Cisco SX80 instead of the Precision60 or speaker track monitoring cameras.

    We use third-party cameras (Sony) with all of our SX80, however, they must be controlled by a third party such as AMX system. Works very well for us - however, none of us is "followed by speaker.

    /Jens

    Please note the answers and score the questions as "answered" as appropriate.

  • Second camera from Cisco TX 9000 support.

    Hi all

    Our customer wants to add a second camera in TX9000, is it possible to have such a structure?

    We intend to connect the second camera with HDMI and the control cable of Garland to focus the video codec C90, too, there will be an additional power supply for the second camera.

    Someone has such an experience or not.

    Best regards

    Ben

    Hello.

    This is possible by using the function of camera to document to have an additional camera to be connected to the system.

    Please note that TX9000 uses no codec C90, no cameras with video control - and it does not support the control of the camera.

    Marius

  • How to make photos of camera for mac air2

    Used just plug in camera for Mac and the camera app open. Now with the new air2 nothing happens when I plug. What should I do to import the photos in the camera on my Mac?

    Thanks in advance for any help.

    Pat

    See the section "Import to your Mac" to import photos and videos from your iPhone, iPad or iPod touch - Apple Support

    Note the section where it says that you may need to manually open the Photos app.

  • what application would you recommend if I want to use my ipad as a second monitor for macbook please?

    What application would you recommend if I want to use my ipad as a second monitor for macbook please?

    http://www.ZDNet.com/article/Duet-display-turn-iPad-into-a-second-monitor-for-Ma c-to-zero-latency-review.

    It uses a wired connection of USP and so did not shift as applications that use wifi

  • Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro

    Wizard Boot Camp is stuck at "Download windows software support...". "0 minutes 0 seconds remaining (for 48 hours and more) ' for Windows 10 Pro.

    I did Boot Camp with 8,1 this system successfully but the upgrade of Windows 10 dorked BootCamp upward when it is added to the system partition.  Has had a lot of work, but ultimately got all partitions disappeared and I tried Boot Camp and got it.  I erased the disc and then reinstalled El Capitan sweet factory without bringing more parameters.  Now, I still get the same error?

    I tried a few sizes of ~ 50 to 170 G with no luck.  It's on a MBP 2016 15 "with retina, 512G SSD, 16G RAM, GPU display.

    Any suggestions?  Troubleshooting?  I can't yet find/say if this thing creates something useful for a log file or?

    1. you download Windows Support software on a wireless connection? If so, try a connection cable, if possible.

    2. Please look in Applications-> utilities-> Console logs for error messages.

  • Unable connect 2 cameras for RM-LVR2 AS200VR

    Hi, can someone help me? I recently bought 2 cameras Sony AS200VR that I want to do multi-se connect to a RM-LVR2, it has failed. I have no problem when connecting a camera to a remote one. I did all the steps described in the manual, but still they could not connect to each other. I have reset the cameras and the remote several times also. Are there problems with the firmware or hardware?

    Could you tell me what steps you performed to connect the cameras?

    Did you put the WIFI of the cams for "Multi"?

    Here is the video tutorial Sonys.

    If I could help you please mark this "acceptable solution".

    Also if you're on reddit you can consult/r/sonyactioncam.

  • HP 8630 will authorize specifying the second tray for printing shortcut.

    All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

    I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

    The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

    In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

    Change the source of your document must make all the problems disappear.

    Kind regards

  • Pavilion 9408nr: Add a second drive for another main drive for laptops

    How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

    Important-copy all data on the second hard drive you want to save on the first hard drive.

    MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

    The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

    The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

  • camera for ec16000 file

    Hi all

    I'm looking for the camera for Pricenton Instrument EC16000 file. (http://www.princetoninstruments.com/products/imcam/megaplus/#7)

    I bought a pice of framegrabber OR cameraLink 1427.

    I also downloaded generator of file OR a camera, but don't really know how to generate the file camera here.

    Is there such a file to camera?

    Thank you very much...

    I would like to thank kate.

    I have the camera from the vendor file...

    See attachment. (Note that this is for gray image, not RGB version). It is a txt file. Please save the file ".icd" before loading it into your MAX.

  • Camera for beginners? I have looked at the T6i, but I have no idea as to what I should buy. Help?

    I'm a dummy when it comes to photography. I have 6 children who play sports and have paid a hundred dollars over the years for action shots. My husband suggested I get my own camera and take some pictures. I would like to use the camera to take to many pictures of my kids playing sports. It's football season and I have 2 players to varsity in high school, 2 Peewee players and a leader. I'm sitting up in the bleachers around the 40-50 line yard (I feel like I can see also the two sense here) and I was about 50 yards away (give or take a bit of) the actual field. Kickoff is 07:30 here in Texas, and it is very close to sunset the Sun. When night falls, the lights of the Stadium are on like any other football game Friday night you can imagine. I want to know what the camera is a good camera for beginners. I have reflected on the T6 and the T6i, but I have no idea of what is the difference. They both come with a bundle, objective 18-55mm and 75-300mm EF. What is the difference between a DSLR and SLR? I need just broken down into language clear so that I can make a good choice. Which would you choose and why?

    More mm, the highest magnification of the image that you will become.  The answers will vary widely depending on who you ask but to keep it really simple (at the risk of being wrong technically)... think of the magnification of the picture that you would get with binoculars in terms of x... I would use 50mm as the basis... which is 1 X.  So 18 mm divided by 50mm will give you 0.36 X and 55mm would give you 1.1 X and 300mm will give you 6 X.  To complicate matters, the size of the camera sensor, the final image is further expanded.  For example the T6/T6i (a cropped sensor device) will give you another 1.6 X magnification compared to a 5 d Mark III camera (a full frame).  The numbers aren't important, rather the idea... a number greater than 1 gives you more magnification - bringing the object more closer to you.

    For digital SLR cameras (full frame), 50mm is normally considered to be 1 X - less than 50mm focal length, we call this wide-angle (lenses).  For FL 50mm more, we call this telephoto lens photo (lenses).

  • Is the 6 d a good camera for sports photography, compared to the 5 d Mark II or III

    I think buying the 6 d. I currently have a 5 d Mark II and was considering the upgrade to the Mark III, but I love the wifi of the 6 d option, I was wondering what I will lose as opposed to the Mark III. I shoot real plans whitewater rafters and kayakers, and I want the best camera for this.

    SRW wrote:

    That's all I shoot, I have water sports on the River, whitewater rafting and kayaking to be more precise. So the 5 3 might be the best option?

    It's certainly a better option.  I don't know if you're just shooting groups floating on a river rafting or get up there in action.  If the latter it is no doubt, but even if it's the first... If you're shooting 100 000 executives was then the cost is easily justified.  The 5 d 3 has a longer life to shutter more weather sealing, better AF, FPS faster and card slots double for professional work.  These characteristics are applicable to what you do.

Maybe you are looking for

  • Erase an iMac of 2008 to give

    I try to erase an old iMac to give to friends. It's an iMac 20 inches at the beginning of 2008. I tried to follow the instructions from apple, but I can't go back to the operating system that it had when I bought first it. He keeps insisting on the r

  • Transfer of data to a new iPhone

    Hello, I bought a new iPhone (iOS 9.3.1) using a new SIM card and the different Apple ID from my old iPhone (iOS 8.1.3). How can I transfer messages Viber and media to my new iPhone iCloud sauvegardΘ (that I don't use iTunes)? I sign with the same id

  • My Safari extensions disappear

    My Safari extensions disappear when I put my IMac to sleep or restart. So, I have to load again and they work until the next time?

  • HP Officejet 6500 All - in - One Printer - E709a specifications.

    I want to know if the HP 6500 or 8600 printers work With Windows 7 with an operating system of Windows XP (SP1) 64 bit. processor. I am really trying to buy a printer, but continue be confused by the stated minimum technical requirements. Thank you D

  • "This plug-in following broke down: Shockwave Flash. Can you get it someone please let me know what to do?

    Since my computer was rebooting I can not play any video online, a message still appears: "This plug-in following broke down: Shockwave Flash. Can you get it someone please let me know what to do? I already try to downland Shockwave players, but ther