Second FireWire PCMCIA card does not work on Satellite A110-178

I tried to use the PCMCIA card as the second controller FireWire from different producers, but they can't take it.
Sweex - PCMCIA Firewire kaart
laptop computer en PCMCIA USB FireWire 1394 Combo CARDBUS

I really need the second FireWire controller on my Toshiba Satellite A110-178.

Thanks Ben


The Satellite A110-178 PSAB0E supports a Cardbus 32-bit / PC - Card 16-bit slot and you can ONLY use cards PCMCIA type II

Please do not forget that your PCMCIA firewire card supports hardware specifications listed above.
If not; you will need to purchase another compatible!

Best regards

Tags: Toshiba

Similar Questions

  • Satellite 2410-413: USB2 PCMCIA card does not work

    Hello. This is my first time on a forum, and my English is bad.
    I tried to install a card PCMCIA 4 port USB 2 (hw & sw) on my Satellite 2410 413 in order to use a dongle of DTV (hw & sw).

    This will not work: ports seem to be declared straight into the computer, but in fact, a simple key memory 64 MB USB-2 [a Sony "micro-vault" key), won't work, and neither will the Winfast DTV dongle.]

    Paradoxically, both the key mem will work on any of the three USB-1 ports, and the DV dongle will light on any port USB-1. The PCMCIA 4 port USB 2 card is new. I can't locate the source of the problem.

    Could someone help me with this issue?
    Thank you in advance for your answer. Here it is (maybe?)
    Another way of formulating the question: how USB ports are managed by the system?

    Hello Rasta

    Sorry, but I think that this issue should be the right one for producer PCMCIA. Try to visit the support page. You might find answers.
    Believe me on this path it is not easy to say why this happens. Toshiba is perhaps responsible for the functionality of PCMCIA card, but not used the card.

    Good luck!

  • Satellite 105-S157: USB 2.0 via a PCMCIA card does not work

    I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
    It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
    If I can access usb PCMCIA ports.

    This laptop does support USB 2.0?
    How can I make it work?

    Please help?

    Thank you


    It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
    Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
    If the USB device use a higher power, the OS cannot recognize and activated the device.
    In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.

  • USB does not work on Satellite A110-294


    I must first apologize because my English is not perfect, so I'll use simple words.

    A friend has a problem with its ports USB on a Satellite A110-294. I try to solve the problem, but without success until yet.
    I did a fresh install of windows XP with the toshiba installation CD, but it does not solve the problem. Then I try to remove usb devices in system properties, but there is a problem when I try to remove the usb host controller. System freez and nothing works no more! I remove hub root, but it works.

    I try to download some difficulty for usb with SP2 problems, but the prob still here. I saw there are some updates to INF files for some chipset intel but it is impossible to find the update intel celeron chipset. Update the BIOS to 1.70 and no result.

    I try to look for some drivers for the motherboard of toshiba but I can't find anything.

    What can I do to fix this?

    Satellite A110-294 belongs to the series of PSAB6E.

    On the Toshiba site, you won't find a chipset driver because it s built into the display driver for this model (chipset). You don't need a driver chipset Intel, this laptop has an ATI graphics chip and chipset.

    Then try to update the display driver: decision-making supported Downloads & => Download drivers

  • Touchpad does not work on satellite A110-276


    Im having trouble with the touchpad on my satellite A110-276.

    I just installed Vista Home Premium and spent in section Vista drivers and downloaded and installed the driver Vista ALPS.

    The touchpad works fine until I restart, then the installation to come again touchpad screens and I have to re - install before it will work.

    I uninstalled and reinstalled, but the installation screens go up every time that I reboot.

    I even uninstalled and reinstalled Vista a few times. (Product recovery disc install XP and the problem persists if I installed XP and then switch to Vist and then install the vista drivers)

    Please can someone help?

    Thank you very much

    Check if it works in Windows XP? Perhaps you should try and install the drivers for the touchpad with the admin rights.

    Have you tried to download the drivers again? I can sometimes happen that packets are corrupted during the download.

  • Satellite M40-129: PCMCIA card does not work with Linux

    I have D-Link DWL-G650 with Atheros Chipset that is supported under linux (madwifi). But if I boot Linux map is not found. I tested the card with a Fujitsu Siemens laptop and it worked out of the box!

    No idea why it doesn't work with my M40-129?


    As you know Toshiba doesn't support Linux and there is no Toshiba drivers for the Linux operating system, but I was able to find this page useful Toshiba on laptop with Linux configuration:

    You must check the machine OS compatibility and other areas.
    I m you will find many useful tips.

    Good luck

  • New Intel 6300 Wlan card does not work in Satellite P850/49


    I recently installed a new wifi card on my laptop in order to give him a dual-band support.

    However, while all goes well in terms of hardware and driver installation, the computer fails to actually use the wifi card and insists on the fact that the card is 'off', even if it is enabled in the Device Manager, the computer recognizes and the computer is not on the airplane mode.

    There is no physical switch on the laptop or the card, the function key does nothing (except the conversion between flight mode and without work), and even diagnostics insist that I need to "activate the wireless feature.


    Not great if you want to be able to get this card.
    In many cases new modules and hardware parts don t work because of compatibility issues. Even if the module supports the Mini PCI standard, this means that all card mini PCI Wlan would be compatible. It is a big misunderstanding.

    However, I found some interesting tips on the page of Intel:

    What you could do is:
    In Control Panel > network and Internet > network connections, right click on the adapter. Check if the adapter can be set to the it.

    Alternatively, you can try to install the Intel® PROSet/Wireless WiFi Connection Utility
    You can enable or disable the wireless radio in the Intel® PROSet/Wireless WiFi Connection Utility main window. The status icon on the main window displays the current state of the radio. In the main window, click on WiFi or WiFi turn off to enable or disable the radio.

    In which case it wouldn't work, I guess that the laptop cannot turn on the wireless network card because of the allocation of the different pins.
    For example, some mini-PCI WLan cards needs to hide the axis 20 (thin strip of electrical tape and it is stuck on the 20 PIN) in order to obtain this permit.
    Google search for mini pcie pin 20 and you will find that you are not the only ones with this problem.

  • 4 GB SD memory card does not work on Satellite Pro a series

    I would like to ask if it is possible to use the card of 4 GB SD memory with internal card reader.
    Thank you

    How should someone provide assistance with no information on the laptop that you use!

    By the way; for most all information can be found in the user manual!

  • P20-552: 2 GB SD card does not work.

    I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old. I recently bought a digital camera (IxUS 750) barrel with a 2 GB Sandisk Ultra II SD card and the combination does not work well. Although I can transfer images from the camera to my Toshiba laptop with a USB cable, sometimes, I would use the SD slot on the laptop, but there seems to be a problem: seconds after pressing home the SD card in the slot, I get the message "disk is not formatted - do you want to format it now?". I said OK but then I get the message "cannot be formatted disk in drive E".

    The card continues to work perfectly fine in my camera and on my iPaq Pocket PC. In the Toshiba SD card works quite happy with Sandisk card of 256 MB SD, which is usually in my PDA.

    Anyone has an idea why the 2 GB card does not work in the Toshiba? It's updating a driver - I watch the other day but I couldn't find anything that seemed appropriate, but I might well have forgotten something...

    I'm running XP Home Edition (SP2) and are automatic updates IT. I have Norton Virus and Zone Alarm running and have no problems with other software/applications - at least, no problem, as someone suggested to suck my laptop overheating a few weeks ago ;-)

    Thank you, Brian.

    It seems that the unit doesn t support this card.
    See your user manual. You will find an information that this device supports only the following SD card formats: Mo 8/16/32/64/128/256 and 512

    According to this document, the 2 GB are high.

  • Graphics card does not work on the Satellite L850 PSKFWA


    I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
    I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

    I haven't noticed any problem with the graphics.
    It may be a Radeon problem, but what I have on my system, which was installed at the factory.

    Thanks for everything back

    + The message was edited: model nr. Add the object +.

    Can you please tell us once more what model of laptop you have exactly?
    Are you using the original Win8 preinstalled?

  • Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

    Everyone knows this problem.

    I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

    Any ideas out there?

    Does anyone have this problem?

    I reinstalled the Yamaha drive a couple of times and always the same: no sound?

    I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

  • Sound card does not work after upgrade to XP Pro

    I need help - Microsoft participated three times without result. After that I updated to XP pro that my SigmaTel C Major sound card does not work. Done all the usual uninstall the driver, update driver etc. No results. When I go into the properties of audio devices, midi and mixer IE driver I see a status message: active but device not started

    Any ideas on how to solve it is greatly appreciated.


    Sorry but I have no explanation for this. I can recommend you to remove the sound card in Device Manager, then restart the unit. After reboot, the sound card must be recognized and installed properly.

    It will be interesting to know what model of laptop you have.

  • Satellite M200 Flash card does not work?

    My new laptop Toshiba M200 (works on Vista) continues to display an error message that my Flash card does not work and that the system is looking for solutions.

    Other threads in this forum, I understand it could be a driver problem, but there seems to be no suitable driver available for download for my M200 model.

    Who can help me?

    Thank you


    When you reference the Flash card, I assume you mean the utility toshiba Flash Cards. in this case, I would say that you reinstall (i.e., uninstall and then reinstall) relevant Toshiba Value added Package for your laptop model. to locate the relevant Toshiba VAP, visit your regional toshiba driver. This should solve your problem, such as cards Flash requires the installation of files for your Fn + F keys (for example by pressing Fn + F6/F7 fades and lights up the screen), so I think that Vista is looking for solutions as the Fn keys could be involved. After installation, you can disable the startup Flash cards when the computer starts up, but do not uninstall the toshiba VAP.

    This should help your question


  • Why Apple cards does not work in Saudi Arabia?

    Why Apple cards does not work in Saudi Arabia?

    Hi msmadi,

    I understand you are trying to use cards for Apple in Saudi Arabia, but faced problems. I don't know what questions you are running, but if you want to use a specific feature, it may not be available here. Take a look at the link below to review what features are available with an iOS device using iOS 9.

    iOS 9 feature availability

    Nice day

  • Option Internet PCI card does not work

    Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

    It says that my Radio power is off, even if in reality is not.

    I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

    Please can you help me.

    Thanks in advance

    Can you please tell us which model of laptop you have exactly?

Maybe you are looking for

  • Deleted messages back on my iPhone mail app

    Whenever I have delete emails on my App Mail (hotmail account), the minutes or seconds later, they made their reappearance.  Help, please.

  • Netflix app is not downloading

    Netflix app downloads in my model of TV Sony KDL-55HX729. It worked perfectly, but someday, I hit the bottom of netflix on the controller and a message says "feature not available". A does anyone know what could be? Thank you.

  • When you receive new emails, some disappear and not suspected Junk or spam.

    My outlook express has started to delete incoming emails. They first appear in the Inbox, and then disappear in a flash. The strange, one can appear in junk one or two days later, I was running AVG but have now switched to AVAST. The problem still ex

  • Problems after auto update

    After an automatic update I lost access to the control panel and am now unable to run some other updates

  • signature with 6.0 problem

    Hello I recently added 6.0 on my other JDE and everything seemed fine that the project I had built a jar file. I could not however managed to sign. I used the same signature tool for jde 4.0.2 to 5.0 without problem so I'm a little confused on what i