second hard drive not recognized

Similar Questions

• Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

  I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

  I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

  That is to say, it is not in the computer > field at all.

  The second hard drive is a Hitachi HDT721032SLA360 ATA Device

  Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

  I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

  I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

  I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

  The only sites that list the drivers for this drive are all spam (thanks, google) sites.

  What I have to change something in my Bios?

  Thanks in advance.

  If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Newly installed internal Second hard drive not recognized

  L1701X XPS laptop (running Win 10). Installed a second 500 GB WD hard drive that is not recognized in the BIOS. I've updated (flashed) BIOS to the A10 and I updated all drivers recommended by Dell Support.

  If I remove the new second player and hover over the first (original) hard drive to the second vacant slot it works very well and also appears in the BIOS - so it seems to me that there is no problem with the second player port.

  I tried everything I could find on the Net about it, for example, to check the connection of the second disc, but nothing done yet.

  Can someone help me with this?

  I'm pulling this Post because I don't get all of the possible solutions to my question.  Thanks to the two people who have asked questions.

• Second HARD drive not recognized by windows 8 but is recognized by the sata bios

  Second disk sata hard of not appearing is not on my computer and disk management. However, the hard drive is displayed in the bios. I am running windows 8 and the hard drive has been used in another cpu with linux installed on it, I want to format the hard drive and use it to store data.

  Thanks, Thomas

  Hello

  Yes, it should work... I didn't know that you were able to do...

  If you can remove the entire partitions... If you can reformat it to NTFS on Linux, you do too much, or just wait and do in Windows.

  Parted Magic is actually a program Linux incidentally...

• second hard drive not detected

  second hard drive not detected in my computer

  Hi focu25,

  1. do external hard drive or internal?

  2. you receive messages or error codes?

  3. you remember recent changes to the computer?

  You can try to start the hardware fixit and check if it helps:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Hope this information is useful.

• Hitachi Lifestudio external hard drive not recognized on Windows Vitsa... why?

  I have a hitachi lifestudio external hard drive and it works great 50% of the time... the other 50%, I fight because it not being recognized on my computer or laptop (both vista).  I plugged it to my computer now and it will only recognize the player but is not the one with my files that I need.  I have two USB cords connected and it was working fine yesterday!  Now all of a sudden it won't work at all.  I got and rehooked many times now and still nothing.  Other USB ports are filled with our wireless mouse and others.  Is there a way to force vista to recognize something?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Try running Microsoft fix it in the following article:

  Reference: http://support.microsoft.com/gp/hardware_device_problems

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices

  Step 2: Check if the external drive is getting detected in disk management.

  If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:

  Reference: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter

• Second hard drive not assigned his letter

  After a few months, my computer laptop second hard drive seems to remove its drive letter assignment. It takes then I go into disk management and re assign it. IM curious to know what could cause this happens

  Hello

  Thank you for coming back to let us to us know that you were able to solve the problem.

  If you want to examine more closely the HDD, Seagate has software, SeaTools.

  http://www.Seagate.com/support/internal-hard-drives/laptop-hard-drives/Momentus-laptop/

  Note: Running trying to diagnose and repair hard drive failure can lead to the loss of data on bad sectors.
   
  We hope that you continue to use the Forum for any other question of Windows, that you can have in the future.

• Satellite A200 - hard drive not recognized

  Hello. Deploy a satellite A200.

  Original problem would not initialize only power light and hard drive light came on a second, nothing on the screen, not access to the parameters of F2. Reinstall memory, no go, deleted the test and drive hard and read disc hard ok in an external enclosure. With disk hard deleted computer will start after market boot disk and running program diagnosis ok. Can now access the settings of F2.

  Format external hard drive, reinstall and start with the startup disk, hard disk appears in the bios, the test runs diagnostic ok.
  Tried to install Windows XP and XP pro and windows twice starts to install and then comes up with an error saying there is no hard drive present, even if the Bios and a diagnostic boot disk at the same time recognize the hard drive.
  Tried another hard drive with the same problem, not recognized.

  Any ideas?

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Normally with this record everything should work fine because it s pre-tested and specifically designed for your laptop.
  Check this box!

  In the worst cases, your HARD drive is faulty and you need a new. The HARD drive seems to have random failures.

• Tecra M9-185 - 750 GB HARD drive not recognized

  I have Tecra M9-185 (PTM91E-0G4045G3) with BIOS Version 1.90 dated the 29.02.2008.
  It came with HARD drive of 160 GB, which is quite old and needs replacement. I want to upgrade the HARD drive. I tried to use the 750 GB HARD drive, but it was not recognized by the BIOS.

  Is it possible to upgrade the HARD disk? Is there a limit to the ability of the new HARD disk that can be installed?

  Hello

  Of course, the HARD drive can be upgraded.
  The laptop supports the SATA controller. The SATA controller is not limited to a special HARD drive size of my knowledge. 750Go should be supported too. But it might be possible that the BIOS is not able to manage these dimensions.
  Try a different SATA HDD with the smaller size.

  But question: why you n t choose an SSD (250 GB)?
  I have improved my Tecra A10 with a 250 GB SSD and the performance gain is amazing. The machine is running much faster and quieter

• Equium - HARD drive not recognized in Windows XP

  I replaced the HARD drive in the laptop, because the original had a catastrophic faulure. I replaced the HARD drive correctly (as far as I can see) but when I come to re - install Windows XP HARD drive may not be recognized.

  Any ideas?

  Hi potters.

  What model of laptop you have exactly?

  It would be important to know because if you have a model that uses SATA hard drives need drivers Intel Storage Manager you can install Windows XP.

  But in this case, you should check other forum threads. You will find hundreds of discussions on installing XP on SATA hard drive.

• External Toshiba HARD drive not recognized on USB 2.0 ports, but only on USB 3.0

  Hello

  I have a Toshiba drive external HARD 750 GB USB2.0/USB3.0
  Now, this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port.

  I have try on port USB2.0 computers different (desktop, laptop) but it doesn't work. The LED is the lightning, but the drive does not appear in the file Explorer.

  You have any ideas?

  Thank you

  > Now this HARD drive is not recognized on USB 2.0 ports from my laptop (same thing on my desktop computer) but only on the USB 3.0 port

  USB 3.0 port 900mA feeds. The USB 2.0 port common provides 500mA.
  I think that the HARD drive needs more 500mA power in order to work properly.

  So if you want to use the HARD drive on USB 2.0 ports, I recommend you to use a USB Y cable which allows to connect the HARD drive to two USB 2.0 ports

• Satellite M70: HARD drive not recognized external - various XP error messages

  Hi all

  I have a Satellite M70 and I have a Western Digital external hard drive.
  Initially, it worked great, I was able to put my large collection of music, etc. on it and run a computer off to save space on my integrated HD.

  But recently I had problems with XP not recognizing HD or be able to write in it. It appears in my computer, then disappear, often randomly when I write new files to it.
  I reformatted the hard drive to NTFS as it ran originally as FAT32.

  I updated my BIOS as well, but I'm out of ideas.

  Anyone else had similar problems with XP?

  Thank you

  Will be

  Have you thought about external HARD drive failure?
  Perhaps failure of HARD drive and, therefore, it cannot be recognized correctly.

• Tecra S3 on Linux: hard drive not recognized

  Hello

  I recently bought a laptop Toshiba Tecra S3 and I'm happy with it, except for one important thing: I can not install Linux on it.

  I tried with the latest versions of Fedora Core and Ubuntu, the hard drive seems to be detected, but it is not recognized at the time of installation. I guess it's a matter of (too) new chipset Serial ATA.

  You have any recommendations or do you intend to contribute to the kernel modules in Linux/order that this model could be installed on Linux?

  Also note that I remember that I had the same problem when I tried to install Windows XP from a CD (not the recovery cd): the hard drive has not been detected and the installation failed.

  Thanks in advance.

  Hello

  I can t believe that you can not install a Windows operating system.
  You formatait once again the HARD drive? I recommend to format the HARD drive completely, then install the operating system.
  In addition, if you want to use the Windows operating system, you must use the recovery CD because this image included all the necessary drivers.

  If you want to work with the Linux operating system, I recommend using the Knoppix distribution. In this case you n t need to install anything. This Linux you can start from the DVD or CD and it works as a Linux operating system normally

  Good bye

• Equium A200-1v0 - HARD drive not recognized OS install

  Hello

  I'm looking to rebuild a laptop A200-1v0 but the toshiba hd I use seems not to be recognized.

  Are the drivers to drive hard toshiba not normally seen by win xp installations. ??

  Thank you

  Hello

  You need to include the SATA drivers which is part of the Intel storage Manger.

  Take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=163165&

  or search this forum for instruction AHCI SATA drivers, etc.
  There are a lot of discussions on this subject.

• 3 50 PX1394U external hard drive not recognized

  I recently bought the external hard drive, Toshiba PX1394U 3 50. I followed the instructions for the installation and everything went as planned either he found material etc. and returned with the message of successful installation.

  However, when I go in my computer that there should be an icon for the external hard drive and it does not exist.

  I saw the thread, recommending using REGEN, but this has no effect on the problem - the icon still does not appear in my computer.

  I use a laptop computer from a different manufacture running Windows XP and all updates are loaded.

  I also had the same problem when loading on my desk.

  Any ideas?

  If you get the message installation was successful, you should find the HARD disk in disk management.
  Control Panel > administrative tools > computer management > disk management

  Maybe you first create a partition or format, but normally you will see players all recognized.