Second screen display with zoom back

Can someone explain how I can change the ratio of the screen of my second return to normal? The second screen seems to be zoomed out and everything is smaller, including the background image, it is not yet hit the corners more. Regardless of the solution of the same problem. I have to be in the max even get there

You'll want to set the resolution to one that is listed as "recommended" that the screen uses all the pixels.  It is usually the highest listed option, but check the manual of the monitor to find the true native resolution.  Then, use the controls DPI ("change the size of text and other elements') to set it to the percentage at the correct level.

Or if it is a problem suddenly, you can try the #1 on this page option to repair the damage.

Tags: Windows

Similar Questions

  • Problems with zoom back with a Flash banner

    I created a Flash banner for the homepage of my site.  Here is the link to the page I'm working on: http://adirondackvic.org/CSSTest9July2012-2.html

    When I zoom in to increase the size of the web page, Flash banner automatically resizes it.  However, when I Zoom out, to decrease the size of the web page, the Flash banner does not automatically resize.  It remains the same size, and you need to hit the Refresh button to get it to scale to fit the newly resized page.

    Is there any solution for this?  I searched the forum and the web and have not found response.  I asked a question on this in another forum, but has received no response. I found some discussions on the issue on the web and on this forum, but I wasn't able to find a way to integrate suggestions from my page.  I tried to change the scale to exactfit to showall, such as recommended, but that has created a problem with the appearance of the page. (The banner properly fits in the window of the header). I also tried (as recommended by one of the entries in this forum) change the width = "100%" height = "100%" or width = "100%" height = "auto".  This fixed the problem for Internet Explorer, but then the whole banner disappeared in Firefox.

    Help, please!  I'm at my wit's end.  Thank you.  Ellen

    Here is the code:

    < div class = "header" > <! - end .header - >

    < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width = "960" height = "100" align = "absmiddle" id = 'FlashID' title = "FlashBanner" > "

    < param name = "movie" value = "BannerTest16.swf" >

    < param name = "quality" value = "high" >

    < param name = "wmode" value = "opaque" >

    < param name = "swfversion' value ="6.0.65.0">

    <!-this param tag prompts users with Flash Player 6.0 r65 or later to download the latest version of Flash Player. Delete it if you do not want users to display the prompt. ->

    "< param name ="expressinstall"value ="... / Scripts/expressInstall.swf ">"

    < param name = "LOOP" value = "false" >

    < param name = "SCALE" value = "exactfit" >

    <!-next object tag is for non - IE browsers. Then he hide from IE using IECC. ->

    <!-[if! IE] >->

    < object data = "BannerTest16.swf" type = "application/x-shockwave-flash" width = "960" height = "100" align = "absmiddle" > "

    <!-<! [endif]-->

    < param name = "quality" value = "high" >

    < param name = "wmode" value = "opaque" >

    < param name = "swfversion' value ="6.0.65.0">

    "< param name ="expressinstall"value ="... / Scripts/expressInstall.swf ">"

    < param name = "LOOP" value = "false" >

    < param name = "SCALE" value = "exactfit" >

    <!-the browser displays the following alternative content for users of Flash Player 6.0 and higher. ->

    < div >

    < img src = "Images/Banner102 - Saint Regis mountain from the Barnum Brook trail - June 2012-1.jpg" width = "960" height = "102" alt = "Of Paul Smith College VIC" align = "absmiddle" >

    < / div >

    <!-[if! IE] >->

    < / object >

    <!-<! [endif]-->

    < / object >

    < / div >

    After zooming, when I resize my banner window is automatically set on the default width.

    FYI: Flash is a bit dead as a web technology, because so many popular devices does not support (iPhone, iPad, iTouch, etc...)  Users who do not have Flash Player will see nothing.

    It is perhaps timely to share your Flash banner with a rotating banner of jQuery which can be seen in all the web features.

    http://www.malsup.com/jQuery/cycle/

    Nancy O.

  • Why cant i pan with zoom back or can't I pan beyond the boundaries of the canvas when zoomed in?


    If you press ctrl + 0 (cmd + 0 on mac) to adapt to the window, hold space (hand tool) to position the canvas where you want to, you can not.  It won't let you.  Same as when im zoomed in and I want to the edge of the canvas for not being on the low absolute of the screen.

    IM curious to know why I don't see this problem online?  COINCIDENCE?  Well, probably.  But no one is embarrassed to not be able to pan past the canvas boundries when zoomed in?  Before you say that's not useful... its very useful. When you drag the handles of a transformation well you can't, when you have all that goes outside the boundries canvas it is often advantageous to be able to pan the bottom middle of the screen.  Vector information is not cropped out... and is anyway not have crop the image when you eventually turn the part of it off the screen?  The only way I know is to simply link or désincorporer...

    In Photoshop CC 2015, go to Preferences > tools and check module.   (The three points in the Toolbox in the screenshot says it's 2015.1.1)

    Reboot and let us know if this helps.

  • Timeline with zoom back. How do I zoom back?

    When I was in the middle of editing a video, I accidentally did something and it became like this:Screen Shot 2014-10-26 at 1.12.56 pm.png

    My managers suddenly all compressed together, and I want to turn the tide back to normal. Does anyone know how to fix this? Thank you!

    =================================================

    Title amended by moderator to make... informative. On a forum where most of the discussions involve some kind of help or another, songs like "I need help" are useless.

    Hello

    This might help: at the end of the timeline, drag the corner right or left of the cursor when the cursor turns into a hand.

    Thank you

    Regalo

  • HP 15-r011dx noteboo9: no audio when with the second monitor attached and Extend mode, duplicate or second screen only

    When I attached a second monitor via a HDMI cable and try to use the duplicate, extend or second screen display modes only, I can get the video to view and run but I get no audio unless I put the laptop display settings to p / only mode.  I really want to use the second screen for PowerPoint/Presenter and play a video (with sound).  Even if I try to play a video on YouTube, I can't get audio only mode p / screen.  Any help would be greatly appreciated.  Thank you.

    Hello

    Please disable the HDMI to force audio to the laptop or use different such as VGA or DVI conection. To hell with its HDMI, please click right "speaker" icon > playback devices > right click and disable the HDMI sound.

    Kind regards.

  • Why don't twist not the home screen display Zoom mode on my 6?

    Why don't the home screen display Zoom mode on my iPhone not twist 6 more iOS 9.3.5?

    Hello, brichter!

    Thank you for joining the communities Support from Apple! Looks like you're wanting to rotate the Zoom mode on your iPhone screen. It is a big question. Read this post here that talks about how make a use display Zoom on your iPhone 6 and later versions. As you can see here:

    With the Zoomed see on an iPhone 6 or 6 s, iPhone Home screen does not rotate landscapemode.

    It is a behaviour whereas you experience when you use the display Zoom.

    See you soon!

  • Use the iMac 5 k with Macbook air as a second screen

    Hello

    I just bought an iMac 27 "5 k new and I want to know if I can use my Macbook Air as a second screen and if so what cable do I need? Ive read some stuff claiming the 5 k unusable with a second monitor, but this looks like it could mean that the iMac can serve as a second monitor?

    Thank you

    You're right that a k 5 iMac can be used as a display of the target, but cannot a MacBook Air to use your iMac as a display with the target - Apple Support Display Mode

    Nor has any video in ability.

  • the on-screen display is reduced when you communicate with the Bank. a ok 2 hours earlier.

    Connected to the online banking services. Screen display (using Firefox) was reduced, cannot read. Have updated to the latest Firefox. The works of banking fine online using Google. I use Firefox instead. Display earlier worked with no problem.

    Hello, try pressing ctrl + 0 ("zero") while you are on the page to restore the zoom level or where it does not browse other troubleshooting procedures common to the Web sites look bad or appear differently than they should.

  • When I click on display and zoom it zooms in on the text. How do you zoom in on a video like you do with Internet Explorer?

    Example: I want to watch a video on startrek.com. You could do it either in fullscreen / but my preference is for Zoom. With Internet Explorer, you can go down to the right lower part of the screen and click on it to go from 100% to 125. On firefox to display the zoom it's just more text. The video Viewer is the same.

    Thank you.

    Check view > Zoom and see if 'Zoom text only' has a check mark next to it. If so, click it.

  • Can you get the screen is on-air on the classic to display on a second screen?

    OK long shot and I think that I I already know the answer is no, but here's what I want to do:

    I will be installing an iPod interface to my OEM car stereo, with control of load and playback via the car stereo/CD changer port. -No info on track return to the display of the car in this solution.

    The ideal solution is to hide the iPod in the armrest, run a video of small groups of power for a 4.3 "TFT LCD that I also use for a backup camera (two screens of entry)

    Ideally this second screen would display the same "screen is on the air than the iPod as well as works of art news and artist of the normal Beach/album.

    I'm very technically competent and capable of doing custom wiring, but I'm after a bit of feasibility info!

    Doubtful, although probably not impossible given enough skill and technical expertise.    But the iPod is not in a usable state easily; the case would open with fortune son hanging out of him.

    You can transmit a composite video signal on the dock, use connector of this

    http://www.Apple.com/shop/product/MC748AM/A/Apple-Composite-AV-cable

    but it is to show a video or a slide show, do not for the mirroring of what is on the screen of the iPod.

  • This second screen HDMI will be compatible with HP Envy 23 now that he upgraded to 8.1

    I have a HP Envy 23 and use a second monitor (Asus) that worked with Windows 8.0. Now that he upgraded to 8.1 he does not recognize the device and says that the drivers are up to date. Do I need to get a new screen? If so, what second screen would work?

    murraynurse wrote:

    This one will work? Diagonal of 23-inch HP W2371d backlit LED display

    Yes, according to the Microsoft Compatibility Center , it is compatible with Win 8.1.  Look at the link I have provided.

    Here is the monitor HP Store.  HP offers a great price and FREE shipping and FREE return if necessary.  I used HP Store several times in the past.  They have very good service.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Why is my second screen does not work - it starts with my main screen, but then turns off.

    My HP Pavilion P7-1120 Desktop PC does not work with two screens - there 8gig of ram...  1.5 terabyt hard drive, Windows 7 64-bit primary system works via the VGA port, but the second screen does not rest via the DVI port.  The two normal startup with the start-up of information on both screens, then the secondary display stops and I get a message "no signal".  Both monitors worked with my laptop PC and older myDell...

    When I go into the control panel and the view tab - the PC does not recognize the second monitor.

    GEO...

    It's not a problem with my PC or whatever it is in the box.  Cables work on other screens of the RGA and DVI.  There is a problem with my screen - the works of port RGA, is not the DVI port.  Another monitor works properly by the DVI.

    Now fixed.

    TKS for the entry.

    GEO...

  • 7 merger, El Capitan, dual display: Windows now refuses to use the second screen

    Fusion 7.1.2

    End 2012 27 "iMac (2560 x 1440, 2.9GHz i5, 24GO RAM) with a 24 '' Dell Ultrasharp (1920 x 1200) connected by a Thunderbolt-HDMI connector cable.

    Guest operating system Windows 7 (and a couple of VM Ubuntu, not relevant here).

    Before, I would start merging and Windows 7 would start automatically, as it has to do. He will start in his own space and use two screens, with the windows desktop 'main' (with the taskbar on the screen of the Mac) and the Dell used to extend space office (just like OSX).

    I just upgraded to OSX to El Capitan and now it's borked:

    1 Windows 7 starts automatically with Fusion (despite still be configured for this purpose). It is a minor annoyance but nothing more.

    2. that's the real problem:

    Windows displays the "BIOS" screen, and then the graphic screen "starting windows", then goes black. In preview VM library, I can see the login screen, but in the space of Windows, nothing. Just black.

    When it happened first, I disconnected the monitor Dell, rebooted, logged on to Windows on one screen, then plugged the Dell back in and it worked. However, reconnected the external monitor on each startup of the machine is not my idea of fun or "just work".

    I changed the display settings of VM Win7 molten (changed "use full resolution for the retina display" section, "Scaled high resolution" 'Unity only' drop-down to "all display modes" and now I can see the Windows login screen in half the width and height of the main screen.) If I log in I get two desktops to a Windows display value, crammed into the width, and half of the height of the 27 "display, with nothing on the external monitor. No amount of reconnected does not change this.

    I restarted the VM and OSX more than once since upgrading to El Capitan, so a simple reboot won't be the solution.

    Help!

    He drives me crazy, any suggestions?

    I had another couple of VM Ware support calls and there is a solution (which works for me) and a fix promised in the next version of Fusion 8 (I presume it comes to version 8.0.2) which should be days (rather than weeks) away.

    The fix may or may not be folded in to Fusion 7.

    The workaround is: parameters of OSX--> Mission control--> check "screens have a separate space.

    The downside is that when dragging between spaces, you often have to swipe the two screens, top menu bars have more two screens in OSX, but I can cope with it for a few days.

  • Use the iPad pro as a second screen on a Macbook Pro 2009 with OSX running on it.

    Hello
    I am to buy an iPad Pro and I would like to know if there is a chance that it might be connected as a second monitor on a Macbook Pro 2009 running Mac OS x Snow Leopard 10.6.8.
    Thanks in advance for your help.

    M.

    Hello

    You cannot connect them with wires. You can, however, all these 2 combinations of applications, use using your wifi home network:

    http://Lifehacker.com/the-best-second-screen-app-for-iPad-1706351639

    http://getidisplay.com/

    However, they all need two OS 10.9 (Mavericks) or later, which means that the configuration is not possible under Snow leopard.

    Your Macbook Pro supports the latest OS X (El capitan), you can update, although it will significantly slow down your computer as well unless you add an SSD.

    See you soon,.

    James

  • In a wreath of two screens Thunderbolt, I could replace the first display with a (for example) 2012 iMac and use target Display Mode to power the two?

    My Thunderbolt screens have the possibility to be connected in Garland and get their signal on a single cable Thunderbolt, an iMac in target Display Mode should not also have this capability? Is an iMac in target Display Mode capable of simulating a Thunderbolt Display not only to get a video for himself but also for a Thunderbolt Display is connected?

    I've heard tell that some people used their iMac screen target with the target Display Mode while the iMac has been connected to another monitor (not a Thunderbolt Display).

    The result was that internal display of the iMac switched on the target Display Mode, but doesn't have the monitor connected.

    I haven't found someone who has tried this and published his experience with a Thunderbolt Display connected to the iMac.

    Unfortunately, a little more research would have responded and answered my question.

    Yes, I can replace one of the Thunderbolt screens in the chain with an iMac. Replaced screen should be one that is not directly connected to the mac of the source.

Maybe you are looking for