Secureboot is not configured properly

Similar Questions

• 8.1 Windows Home Premium SecureBoot is not configured properly

  I have a new laptop of envy, and I've just updated to 8.1. I get the familiar watermark on SecureBoot. I went into the BIOS, and I don't see the option security to change the option to activate SecureBoot. Is there a solution?

  In the BIOS, under System Configuration, under start options..., you will see the option SecureBoot who is currently disabled. Activate it solve the problem. See the screenshot below:

  

• Windows 8.1 secure pro Boot is not configured properly

  After the upgrade through shop windows to Windows Pro 8.1, I get the watermark:

  «windows 8.1 secureBoot pro is not configured properly to build 9600»

  I went into the BIOS, tried allowing the secure startup, disabling, restore the factory keys, but nothing has solved the problem.

  The command (windows powershell administrator) Confirm-SecureBootUEFI returns false.

  Any ideas?

  Best regards

  Z.

  I explain how I solved the problem in my Ideapad y510p.

  1 - Press the windows key and the search for "start".

  2 - Click on "change advanced startup options."

  3. in the title of "Advanced boot", click "restart now."

  4 - click "troubleshooting."

  5 - Click on 'Advanced Options '.

  6 - click on "parameters of UEFI firmware.

  At this point, you should see the configuration of the bios/uefi page:

  7 - go to 'security' and then 'reset to installation mode.

  8. then, go to 'leave', then 'exit saving changes.

  Once back in windows, repeat the steps 1 to 6, then in the bios screen:

  -return to 'security' and this time select "restore the keys to the factory.

  -Then go to 'leave', then 'exit saving changes.

  At the next reboot, the problem should be solved, or at least it worked for me. I exclude not only performing the second part of the operation as described is sufficient to solve the problem.

• SecureBoot is not configured correctly (Windows Pro 8.1 with Media Center)

  I have a HP Pavilion H8 - 1360t purchased July 2012 with Windows 7.  The system has installed UEFI and AMI BIOS v7.09.  I have upgraded to Windows 8, first preview, then the final version.  Yesterday, I upgraded to 8.1.  I now have a watermark bottom right indicating «SecureBoot is not configured correctly...» "and I get activity 2002 of the VerifyHardwareSecurity ' SecureBoot is currently disabled.  Please enable SecureBoot by the system firmware.  I have checked the BIOS and can't find an option to activate SecureBoot.

  HP an article stated that a BIOS version of 8 support SecureBoot but there is no upgrade available for this relatively new machine BIOS.

  Another article warns against upgrading an HP computer preinstalled with Windows 7 to Windows 8 with the following statement:

  " UEFI technology allows a number of improvements in the PC security and performance and is being implemented in all PC pre-installed with Windows 8.". Some PC preinstalled with Windows 7contain UEFI technology and can be modified to provide these features. However the process requires skills and specialist to complete at this time, HP provides instructions to make this change. »

  So the question for HP is: what will be a BIOS level or another solution provided for this modern computer to fully activate the SecureBoot?  I've seen a lot of posts on the forums Microsoft Community of other owners of H8 - 1360T so it's not unique to me.  As a player for Microsoft important material, it is hoped that HP would be sensitive to their customers.  As a customer of long date HP (belonging to two previous HP pavilions - the system is 3rd in the House), I sincerely hope that I have not made a mistake in my material of choice provider.

  Please download and install the update to the BIOS of your system from the following link:

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61511.exe

  This will restore all the functions BIOS necessary for Windows 8/8.1. After updating the BIOS, go into the BIOS and enable the SecureBoot option. This will stop the message secureboot on Windows 8.1.

  This also enables the BIOS UEFI environment.

• Windows 8.1 - secure boot is not configured properly

  Hello everyone. Since I installed Windows RTM 8.1, I kept making a watermark "secure startup is not configured properly" on my machine. The problem is that the secure startup option is enabled in the BIOS (and cannot be changed).

  The problem is that Windows 8 detects that it is not. Any ideas what could be the problem?

  It does not affect my work, but the watermark is very annoying.

  Thanks for the info,

  --

  Robert Iagar

  
  

• This application is not configured properly, maybe you should try to reinstall

  This application is not configured properly, maybe you should try to reinstall. He says this even if it was just installed, or was not yet installed. How can I fix it? His allusion to a Bethesda game. But I think that the issue is much more than that

  I activated the AutoPlay on the hard drive and I don't really see a problem that I know in the event viewer. When I try to run the game, it appears every time.

  And Bethesda support said what?

  And try to be more comprehensive and coherent when you ask them.  In other words, identify the game, explain what you mean by "it was just installed or is not installed", and why you "think that the problem is much more than that."  What do you think is the problem?

  Whatever that allows automatic reading has to do with your problem?  Why you mention it?

  What errors or warnings are displayed in the event viewer, even if they do not seem to be a problem for you?

  Be sure to identify the version of Windows you have, including service pack.

  Complete without paraphrase error messages display also allows to diagnose problems.

  Finally, try to uninstall the application using the control panel > Add / Remove programs.  Then use Free Revo Uninstaller to remove remnants of the disenfranchised.  Then run Disk Cleanup (start > run > cleanmgr.exe > OK) and restart the computer before you try to reinstall.

• The key of the MA is not configured properly or is corrupted in the file system and s doe does not exist in the repository of management.

  I get this error and is it possible to solve this problem without re-creating the service/s once again, etc. Just curious, if you have suggestions/steps I may have missed or I'll drop and recreate new services

  In any case, I have a backup of the emkey.ora and place it in the sysman/config directory, but still does not work... Please see below...

  C:\Documents and Settings\abigail > emctl status emkey

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of the MA is not configured properly or is corrupted in the file system and the DOE

  s does not exist in the repository of management. To correct the problem:

  (1) (copy the emkey.ora another WHO file or backup machine OH/sysman/c

  onfig directory.

  (2) configure the emkey.ora file by running ' emctl config emkey - emkeyfile < emkey.

  ".ora file location >.

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  Enter the password for the repository:

  ********

  ****

  The key of Em is already configured. To override the current configuration, run "em".

  CTL emkey < options > config - force. "

  C:\Documents and Settings\abigail > emctl config emkey - emkeyfile E:\app\abigail\p

  roduct\11.2.0\dbhome_1\sysman\config-force - sysman_pwd *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  The key of the MA could not be configured. Cannot access the file E:\app\abigail\product

  \11.2.0\dbhome_1\sysman\config.

  C:\Documents and Settings\abigail > emctl dbconsole sysman_pwd secure *.

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.

  http://Abigail:5501 / console/em/aboutApplication

  DBCONSOLE already stopped...   Fact.

  Officer is arrested...   Fact.

  Dbconsole fixing...   Has begun.

  Please enter repository schema password:

  Dbconsole fixing...   Failed.

  EMKey is misconfigured.

  Sorry but I have to ignore your suggestion and don't worry how I spend my time

  AND OHMYGODD IT WORKSS! For later use, this is how I solved it based on my research, in fact based on a particular search:

  http://franjv.blogspot.com/2013/08/eMKey-problems-in-Oracle-RAC-11gr2.html

  Thank you the one who wrote this and... is it the same "Fran" who helped me last time? Coincidence?

  In any case, thanks

• Error modem already in use or is not configured properly

  Original title: try to use the modem internet cleartalk on laptop

  Downloaded there screen says.  but when I try to connect it gives me an error that it is already in use or is not configured correctly. It is of ClearTalk EVDO Mobile Broadband

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use?

  3. What is the model number of your computer modem?

  4. do you have other devices connected to the computer?

  The error you receive is typical of drivers who don't are incorrect or not installed. You run the system with UAC turned?

  I recommend you to connect the modem to another computer that is running Windows Vista and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  You can also try the following methods and check if it helps.

  Method 1:
  To resolve this problem, remove the modem, and then restart the computer. When the computer restarts, Windows detects the modem and attempts to install the driver appropriate for that. To do this, follow these steps:
  a. log in the computer as an administrator or as a member of the Administrators group.
  b. click Start and then click Control Panel.
  c. double-click phone and Modem Options.
  d. click the Modems tab.
  e. in the following modems are installed list, click the modem that you want to delete and then click Delete .
  f. click Yes in response to the ""are you sure you want to remove the modem selected from your system? " " message.
  g. restart the computer.
  h. the found new hardware wizard starts. Follow the instructions in the wizard to reinstall the modem.

  Method 2:
  You can re-install the modem driver on the manufacturer's Web site and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference:--

  Solve the problems associated with the modem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• Secure boot is not configured properly to build 9600

  I've updated my Hp Pavilion g6-2231tx to win 8.1 and it shows on the desktop, Secure boot is not configured correctly. I went through the entire solution and when I went to the computer Setup utility by pressing F10 and configuration of secure boot, legacy support is disabled, but the configuration of secure boot is blocked that is to say, I can't allow it. can anyone help?

  The following has worked for me.

  Had the same problem, that is to say, Secure Boot has been blocked. Clicked on load Factory Default key HP and the Secure Boot option change was authorized. Using the system for the last half hour. No problem yet.

  At the idea of 12 of the Startup Windows 8.1 message subject message. Secure

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-8-1-secure-boot-message/TD-p/3026291/page/2

  It took me all day to fix this. Never realized a simple upgrade would be this frustrating. MS could have tested a bit more before coaxing us to upgrade. I should have waited 6 months before the upgrade for all these wrinkles are ironed out.

• Windows updates is not configured properly

  After several formats again, I get a massive list of installed updates.

  I have download the list. They install. Then, they cannot be configured.

  Download list takes more than an hour and totally makes my phone useless.

  I had to stop all updates.

  Any suggestions?

  Hello Herbskel,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update Troubleshooter and check.
  Reference:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  He makes sure your computer is connected to the Internet, and check if your card network and Windows update services are running properly.

  If it does not help, reset the Windows update components and check the issue.
  Reference:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  : Note manually reset Windows update components.

  Important:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error 633: The Modem already in use or not configured properly

  Hello

  I use a Windows7 Home Premium 64 bit PC.
  When I am trying to connect to the internet via 3 g USB modem, I get error 633: Modem is in use or not properly configured.
  The software and drivers have been installed correctly.  I uninstalled and re installed several times without success. I tried the same thing in safe mode without success.

  Any help is appreciated.
  Thank you

  Hello

  I suggest you to check if the modem is compatible with Windows 7.

  Check out the link:

  Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

• Error code: 80070005 (updates are not configured properly)

  I am experiencing infinite loop "updates were not correctly configured.  Returning from the changes. "Windows Update poster 11 updates did not include KB 2183461, 982665, 980436, 981997, 2160329, 982799, 983589, 981852, 982664, 2079403 and 982214.  I tried to install manually via the download section.  It has not yet.  The error code is 80070005.

  Hi Dwsamee,
   
  1. who is the edition of Windows that is installed on the computer?
   
  Try these steps and check the result.

  Step 1: Uninstall the security software

  a. see Uninstall or change a program

  b. once the security software is uninstalled, restart the computer.

  Very Important: Be sure to reinstall the security software after installing Windows updates.

   

  Step 2: Download and install the update for your Windows system preparation tool

  a. see http://support.microsoft.com/kb/947821

  b. download the good update for your Windows and install it successfully.

  c. restart the computer so that the changes take effect.

   

  Step 3: Install updates

  a. connect to the computer as an administrator.

  b. Click Start, type Windows Update, click Windows Update.

  c. install the updates one by one.

  d. restart the computer after each update is installed.

   

  See Updates Windows Installer

   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• the mini lvl4 file sys on peripheral unit driver windows is not configured properly

  How to configure the file lvl4 mini sys driver for windows xp home edition windows?

  Hi Jamiexxx,

  1. What is the problem that you are facing on the computer?
  2. Why do you want to configure the file on the computer?

  nv4_mini.sys is a driver for the Nvidia graphic card installed on the computer.

  If you have problems with video or viewing on the computer, I would say that you download and install the latest drivers for graphics card from Nvidia on the Nvidia site.

• The embed code is not configured properly

  I received the error in 'My MSN' when I opened MSN video.
  He showed Soapbox as the player.

  I called Verizon support.
  I was transferred to the sub-team of MSN
  I was told to update the Flash Player.
  After the update, the problen is resolved.
  Thanks to the team under MSN