Security filters for the Types of Plan of ASO in 11.1.2.3


All,

My understanding of security filters for the Types of Plan of ASO in 11.1.2.3, is that they are not as robust as Types of Plan of traditional BSO are. Is this true? If so, can I restrict access to users who are assigned to the ASO Plan Type to display only and read/write on the private accounts and entities (for example)?

Thanks in advance.

The limitation that you refer is a bit confusing.  In summary, the planning will not create Essbase security filters on a data base of the ASO.  However, this does NOT mean that you will not have security on the Type of Plan of ASO.  Instead, it depends on which tool you are using to access the Type of Plan of ASO.

If you want to connect to the ASO Plan type planning or tool (e.g., EN) with a connection to planning, you'll be fine.  The planning gets its security filters Essbase security information.  It gets its information from the relational repository security.  So the planning and the EN (with a connection to planning) are supported.  Security works as you would expect, even for the Type of Plan of ASO.

If you want to connect on the type of Plan of ASO with something that requires a * Essbase * (not planning) connection, it only is not supported out-of-the-box, because planning will not create filters on the ASO cube (at least not yet in this version).  However, there is nothing that prevents you from creating filters on your own.  I usually manage all of my safety in an Excel/VBA model that allows me to export/import the Essbase security planning and.  This allows me to apply specific to Essbase filters after a refresh (by importing the custom filters via MaxL).

So the question is... what tool you will use to access the Type of Plan of ASO?  If you use a connection of planning, you're good.  If you use a connection of Essbase, should be a personalized approach.

Hope this helps,

-Jake

Tags: Business Intelligence

Similar Questions

  • Not available in the Type 3 Plan attribute

    Hi all

    I use EMP 11.1.2.4. When I run the application studio financial statement, I can see my attribute fades in the Plan Type 1 but not in the Plan Type 3. That is, if I have a link and develop a report against the foreground Type 1 can drag and drop my attributes in the lines, columns, etc. However, when I link the report against the Plan Type 3, I'm more able to see the attribute fades as a selection available for drag and rop in lines, columns, etc.

    Thanks in advance for any help.

    Can you confirm that the DB Fr for Plan type 3 connection is not a planning connection? If there is a link to planning, you will not be able to see the size of the attribute that those are exposed through an DB EN Essbsase connection.

    Of course, the assumption is that the dimension that has the size of the attribute is valid for the type of Plan 3

  • ODI - Size Build for several types of plan

    Hello

    Application of classical planning on 11.1.2.2

    I have a version of dimension for an application with two types of plans.   The entity dimension is one of the six required and is shared by the two types of plans.  So when I reverse engineer my target planning app in my model target in ODI, there are four new fields.  Two fields of aggregation for each plan type and two plan of fields of type for each type of plan.   I can then map my SQL Server source that has all four.

    However, I have exactly the same to a custom dimension called 'Project' and when I reverse in the dimension of 'Project' target only two fields for the aggregation appear for each type of plan.   The Type of Plan of those who are not there so I can't have my model source card.

    This is normal and it is assumed that this dimension is shared and the two contours will be updated?  Or something is wrong and I should / need to have these "Type Plan" for each type of plan on the target model?   The fact is required dimension feature have nothing to do with it?  I rechecked and the two Types of Plan are verified in the screen "Administration-> Dimension.

    Just confused with ODI runs.  No sense sometimes

    The two types of plan are updated every hour.

    As I said, when loading dimensions in Hyperion Planning with ODI, ODI adapters that connect to the planning will limit the options on the dimension build based on the rules that apply in Hyperion planning.

    So what I mean is that if you can not do in planning directly then used ODI will give the option to do either.

    Remember you when loading dimensions in planning directly (in the user interface or through ODI) you are loading in planning first and then it is a refresh of Essbase growing dimensions and members to essbase and plan types in Essbase. Loading dimensions in Planning with ODI you're ALWAYS updated of all types of plan. The options you see in ODI on the Plan Types and aggregations are options/parameters for the Member. Its not what type of plan is being updated. The Plan Type of option in the entity dimension is a setting that says: is this valid member for this type of plan. It is to say is that members actually exist in this type of plan. This is not an option to say update the members for that plan type.

    But back to what I said about the custom dimensions. Custom dimensions are valid for the Types of Plan, that are set at the level of the dimension. That is to say members of level you can't say member 1 is valid for type 1 and type plan 2 plan and member 2 is valid for the Type 1 Plan. If the dimension is valid for both, then all members of this dimension are valid for both. You can not change at the level of the Member and so if the option is not relevant and ODI has so no need to get this option

    I think you're confused as to what Type Plan of ODI fields are actually for. As I say, is not here to say what plan update types. His option to tell whether or not this member exists in this type of plan.

    So in your case because the project is valid for the two types of plan, then you don't need to specify the type of plan at the Member level because by default both will be updated, because you do not have the option for both during the loading of the dimension with the help of ODI is not to be updated.

  • What is the purpose of the type of plan in hyperion planning?

    why we use the type of plan what is the purpose?

    Plan types allow you to break a budget or forecast of components - serving slightly different purposes each.

    You might have a Plan Type where you budget data of salary & compensation for employees. Where analytical budgets can be moved into another Type of Plan which users budget expenditures not compensation & revenue to build a larger budget. A third Type of plan could be used to review the budget in a reporting application.

    Each Plan Type uses a separate Essbase database. The type of database can be either ASO or OSB Office.

  • Value to be entered when filling out the metadata for the type of Version in Plannin

    Hello
    I extracted the dimension of the version of my plan.
    Now I need to push planning 11. I reversed the planning 7 dimension by using the dimension of the version to push the value.

    After the excerpt, the type of version is UDA as 'Standard bottom-up, Public '. I divided the chain into 2 columns in the version type and others such as the UDA.
    I traced the type column version to the source to version type (in planning) to the target.

    The performance of the interface, it generated the following error log:

    Final Version, Version, never share, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up.
    REV 1, Version, never share, Release 1, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up

    What value must be entered for the type of version?

    Furthermore, if there is no doc/pdf that provide details on the different values that can appear in the dimensions of planning, please share.

    Thanks in advance

    Published by: user8628169 on January 18, 2010 16:40

    Hello

    The value should be 'Bottom Up' or 'Target', have a read here for properties

    Ok?

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Provision of different levels of admin access plan the types of planning

    How can I set up by types of plan admin access levels? For example, I would like to grant full admin access to a plan type, but to limit their access to another type of plan in the same application? The type of plan, I want to limit them is essentially a type of labour I won't allow them to have access to admin. Someone knows how to do this?

    Hello

    Unfortunately, you will not be able to configure a user to manage the metadata for a number of types of plan in classical planning.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Security Service for the family

    How to enable the security service for the family that has been accidentally disabled on windows 7 computer?

    Hi juanmed2584,

    Did you mean that your accidentally disable the filter of parental controls on the computer? If so, you can simply activate the filter by following the steps below:

    1. start Windows Family Safety.

    2 connect to the parent account credentials if prompted.

    3. click on Activate parental control filter under user account from the child.

    4. Enter the parent account password.

    If you have any other questions, please let us know.

    Thank you!

  • Cannot synchronize windows security 8 for the family with Web site

    I already have a security account for the family windows on pc windows 7 of my son.  We just got him a windows Tablet 8 for school and I want to add this device to his account with the same settings.  I went through the installation on windows 8 (creation of a local child account for him, which allows security for the family for the account).  When I hit the button to manage the settings on the family safety website, it tells me that the service is not available.  My Internet as fine (since I'm on this site), so I doubt that it is a temporary problem.  On the family safety website, it shows its Windows 7 PC, but not the tablet of windows 8.  Someone has ideas of how do I synchronize the security settings for the windows family 8 with the site?

    Hi Mike,.

    Do you get the error message when you press the button "manage settings on the family safety Web site?

    You can check the status of the safety of the family here: https://status.live.com/detail/fss

    It is possible that your Microsoft Account needs a form of additional verification.

    Follow these steps:

    1 1 glisser slide from the right side of the screen, then select settings

    2. Select change PC settings.

    3. Select accounts

    4. Select your account

    Now, you can see some indications that your account or the machine needs additional checks. If you could click on the link and follow the instructions provided, this might solve your problem.

    Once you are done, follow these steps:

    1. go in other accounts (under accounts where you were previously).

    2. Select the account you want to have a child, and then click change

    3. change the account to a child account, then select OK.

    To ensure that you are connected to the parental control service, follow these steps:

    1. press on the button of the window on your keyboard

    2. tap parental controls and select parental control

    3. press on the large enough to Manage settings on the Family Safety website button.

    4. you should see a list of people who can manage these settings online.

    Let us know the result. If you have any other questions, we will be happy to help you.

  • someone from adobe can help immediately please?  I've already paid for the 1 year plan and your system tells me that I have only 30 days trial

    someone from adobe can help immediately please?  I've already paid for the 1 year plan and your system tells me that I have only 30 days trial

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    .

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • Hello, we want to know if we can change our creative cloud for the only diet plan (for Adobe Photoshop and Illustrator, only), because when we read it, we but that we can only take one of them. Thanks in advance.

    Hello, we want to know if we can change our creative cloud for the only diet plan (for Adobe Photoshop and Illustrator, only), because when we read it, we but that we can only take one of them. Thanks in advance.

    Yes, you can change your plan.

    Also, IF the change is not possible, you can cancel and buy again.

    Please contact support by calling/chat for cancellation requests and billing queries:

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    You can also check the help below document:

    https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

    Please go through the Adobe - General conditions of subscription as well.

  • Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

    Hello! I have to cancel my membership for the creative cloud plan but I find no different contact of live chat. I need TO cancel before March 22. Please help me!

    This is an open forum, not the Adobe support... You need Adobe support to cancel a subscription

    -Start here https://forums.adobe.com/thread/1703848

    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

    -as well as two links that can provide more details, if the links above don't help

    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • EQG-31209: no attribute security defined for the source of HIS

    I try to configure ITS for OBIEE 11.1.1.7, I followed the oracle document clearly and I configured the oracle document system. so I am facing the below error so please help me for this problem.

    is it necessary to have the web content Center Oracle 11 g?

    (1.) where I can fix the "EQG-31209: no attribute security defined for the source?

    (2.) where I can fix "EQG-30249: crawler process abandoned. '?

    EQG-31209: no attribute security defined for the source (id = 21)

    at oracle.search.crawler.WebCrawler.init(WebCrawler.java:631)

    at ImtCrawler.run (ImtCrawler.java:1954)

    at ImtCrawler.main (ImtCrawler.java:534)

    13:05:47:984 EQG-30249 main ERROR: process of Crawler abandoned.

    Thank you.

    Hi Corinne,.

    I have fixed the problem. It's just a little configuration problem. What is the error code you face?

  • Casting table PL/SQL for the type of existing table and back ref cursor

    Hello



    I have the problem of casting a pl/sql table for the type of an existing table and turning the ref cursor to the application. Casting a ref cursor back and number of pl/sql table works well.



    Declarant

    < strong > TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities >

    within the stored procedure, fill in a table of this type temp_table_name and returning the ref cursor help

    < strong > results OPEN to SELECT * FROM TABLE (CAST (temp_table_name AS type_table_name)); < facilities >

    generates an error. type_table_name is unknown in this distribution. According to me, this happens because of the declaration of the type locally.



    Statement type_table_name inside the package specification does not work neither. Incredible, cast to the said dbms_sql.number_table to specify ref cursor back and dbms_sql package works very well!



    < strong > CREATE TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities > deals without any error but creates an invalid type complain a reference to package_name.table_name



    I don't want to declare every column in the table in type_table_name, because any change the table_name table would result in an inconsistent type_table_name.



    Thanks in advance!

    Edited by: user6014545 the 20.10.2008 01:04

    In any case you are right that there is a problem around anchorage (or maintaining) types of objects persistent to match the table structures, they may represent.

    In the case you describe, you might be better off just open the refcursor immediately the using one of the techniques described in the http://www.williamrobertson.net/documents/comma-separated.html to manage the delimited list.

    In the more general case where the line of treatment is necessary, you may make the pipeline functions.

    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    
    SQL> CREATE TABLE table_name
      2  AS
      3     SELECT ename column_name
      4     FROM   emps;
    
    Table created.
    
    SQL> CREATE OR REPLACE PACKAGE package_name
      2  AS
      3     TYPE type_name IS TABLE OF table_name%ROWTYPE;
      4
      5     FUNCTION function_name_pipelined (
      6        parameter_name IN VARCHAR2)
      7        RETURN type_name PIPELINED;
      8
      9     FUNCTION function_name_refcursor (
     10        parameter_name IN VARCHAR2)
     11        RETURN sys_refcursor;
     12  END package_name;
     13  /
    
    Package created.
    
    SQL> CREATE OR REPLACE PACKAGE BODY package_name
      2  AS
      3     FUNCTION function_name_pipelined (
      4        parameter_name IN VARCHAR2)
      5        RETURN type_name PIPELINED
      6     IS
      7     BEGIN
      8        FOR record_name IN (
      9           SELECT table_alias.*
     10           FROM   table_name table_alias
     11           WHERE  table_alias.column_name LIKE parameter_name) LOOP
     12
     13           PIPE ROW (record_name);
     14        END LOOP;
     15
     16        RETURN;
     17     END function_name_pipelined;
     18
     19     FUNCTION function_name_refcursor (
     20        parameter_name IN VARCHAR2)
     21        RETURN sys_refcursor
     22     IS
     23        variable_name sys_refcursor;
     24     BEGIN
     25        OPEN variable_name FOR
     26           SELECT table_alias.*
     27           FROM   TABLE (package_name.function_name_pipelined (
     28                     parameter_name)) table_alias;
     29
     30        RETURN variable_name;
     31     END function_name_refcursor;
     32  END package_name;
     33  /
    
    Package body created.
    
    SQL> VARIABLE variable_name REFCURSOR;
    SQL> SET AUTOPRINT ON;
    SQL> BEGIN
      2     :variable_name := package_name.function_name_refcursor ('%A%');
      3  END;
      4  /
    
    PL/SQL procedure successfully completed.
    
    COLUMN_NAME
    -----------
    ALLEN
    WARD
    MARTIN
    BLAKE
    CLARK
    ADAMS
    JAMES
    
    7 rows selected.
    
    SQL> ALTER TABLE table_name ADD (new_column_name VARCHAR2 (1) DEFAULT 'X');
    
    Table altered.
    
    SQL> BEGIN
      2     :variable_name := package_name.function_name_refcursor ('%A%');
      3  END;
      4  /
    
    PL/SQL procedure successfully completed.
    
    COLUMN_NAME NEW_COLUMN_NAME
    ----------- ---------------
    ALLEN       X
    WARD        X
    MARTIN      X
    BLAKE       X
    CLARK       X
    ADAMS       X
    JAMES       X
    
    7 rows selected.
    
    SQL>
    
  • An error occurred during the security check for the message

    Hello

    I'm just starting to try to use axis2 to access the Eloqua api webservie. Under code comes from using the API of Eloqua WS with Java - part 1 and I followed the steps in the link.

    // To debug the this line will set Log4J to use System.Out for a lot of
            // messages.
            // BasicConfigurator.configure();
            // Configure your username and password here.
            String company = "TechnologyPartnerWelocalize";
            String username = "leo.chen";
            String password = "Password1";
            // Assuming that the conf directory has the Axis2 config file and
            // Rampart is installed correctly.
            ConfigurationContext ctx = ConfigurationContextFactory
                    .createConfigurationContextFromFileSystem("D:/axis2-1.6.2/conf", null);
            EloquaStub stub = new EloquaStub(ctx,
                    "https://secure.eloqua.com/API/1.2/Service.svc");
            ServiceClient sc = stub._getServiceClient();
            Options options = sc.getOptions();
            sc.engageModule("rampart");
            options.setUserName(company + "\\" + username);
            options.setPassword(password);
            String[] assetTypes = stub.listAssetTypes(new ListAssetTypes())
                    .getListAssetTypesResult().getAssetTypes().getString();
            System.out.println("Asset Types count : " + assetTypes.length);
            for (String s : assetTypes)
            {
                System.out.println(" -> " + s);
            }
    

    But I got following error when executing code above.

    Exception in thread "main" org.apache.axis2.AxisFault: An error occurred when verifying security for the message.
     at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:531)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:375)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:421)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
     at com.eloqua.secure.api.EloquaStub.listAssetTypes(EloquaStub.java:1928)
     at com.eloqua.sample.WSConsoleClient.main(WSConsoleClient.java:42)
    

    Another problem is when I changed the chain of the company to one of the other stuff like "TechnologyPartnerWelocalize111", I get below error

    Exception in thread "main" org.apache.axis2.AxisFault: SOAP header missing
     at org.apache.rampart.handler.RampartReceiver.setFaultCodeAndThrowAxisFault(RampartReceiver.java:180)
     at org.apache.rampart.handler.RampartReceiver.invoke(RampartReceiver.java:99)
     at org.apache.axis2.engine.Phase.invokeHandler(Phase.java:340)
     at org.apache.axis2.engine.Phase.invoke(Phase.java:313)
     at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:262)
     at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:168)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:364)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:421)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
     at com.eloqua.secure.api.EloquaStub.listAssetTypes(EloquaStub.java:1928)
     at com.eloqua.sample.WSConsoleClient.main(WSConsoleClient.java:41)
    Caused by: org.apache.rampart.RampartException: SOAP header missing
     at org.apache.rampart.RampartEngine.process(RampartEngine.java:96)
     at org.apache.rampart.handler.RampartReceiver.invoke(RampartReceiver.java:92)
     ... 10 more
    

    I connected to the Eloqua using "leo.chen/Password1" and found that the name of the company is technology partner - Welocalize.

    No idea what causes this kind of errors? I use Axis2 - 1.6.2 and rampart - 1.6.2. What I changed so far is to copy modules of the rampart - 1.6.2 and axis2-1.6.2\repository to axis2-1.6.2\conf folder and the commented line "< Ref module ="address"/ >" in axis2.xml.

    Leo, I think that your use case law above may be met by using our RESTful API.  For more details, see REST API - Documentation for kernel objects .

    With this API, you can use OAuth instead of basic authentication, and it is probably easier to try to consume the SOAP WSDL and make it work.

  • Where lives the logic for the types of flow control step?

    For most types of step, the behavior of the type of the step is determined entirely by the configuration of the stage - that is to say, the properties that can be configured in the window type, such as the properties of the step, steps, etc..  But as far as I know, the behavior of the control flow step types (for example, hop, back at the beginning of a block of loop after a late stage) does not seem to be defined by a lower level, flag, attribute or any other configuration item - it seems to be something inherent to the motor TestStand.

    If this is the case, how the TestStand engine knows to provide the functionality for a particular flow control step type?  It runs the appropriate logic based on the name of the step type?  I suspect that this may be the case, because if I create new types of step in copying the types of step ForEach and end without any changes other than to specify the new name for the beginning of the block and end step types, new types of step repeat not the loops as expected.

    Can someone clear this up for me?  Types of flow control step break the model completely define the features by changing the type of step, or I am simply not find relevant configuration items?  I tried to create a new type of end step that allows an expression pre, but it broke my step ForEach (new) type loopback functionality.  Is it possible to do what I want?

    You are right that the engine processes specially the flow control measures. He looks at the name of step type. If you want the same behavior execution, you must keep the original name of type step as a prefix on your step type name, such as NI_Flow_End_CustomizedByMe.

    Also, check out the http://forums.ni.com/t5/NI-TestStand/copy-of-NI-Flow-End-does-not-work/m-p/290170/highlight/true#M88...

    There is the source code that is similar to what the engine makes the steps of flow control. That was the actual code before it moved into the engine. It might be a bit outdated now. I found this on my machine in C:\Program Files (x 86) \National Instruments\TestStand 2010\Components\StepTypes\FlowControl\

Maybe you are looking for