Security for the family and the Task Manager

Similar Questions

• Main tasks for the Task Manager.

  What are the main task which must be running in the Task Manager?  I need a list of them.  Those that you must have for the computer to run.  The fundamental task just located in the programming.  Nothing extra.

  What are the main task which must be running in the Task Manager?  I need a list of them.  Those that you must have for the computer to run.  The fundamental task just located in the programming.  Nothing extra.

  There is no such list.

  If you want to see a minimum list, (1) restart in Mode safe mode and run the Task Manager or (2) run msconfig, see "Start diagnosis," reboot and run the Task Manager.

• Explorer Windows has stopped working. Same for the Task Manager.

  I have Windows Vista and have had this computer for several years.

  I tried to work on something yesterday and I found that all my Office 2007 programs would be would break immediately at the opening, while they were working fine a week ago (the last time we used them).  I ran the diagnostic program came not upward with anything and then installed a bunch of windows updates I received automatically.  When the computer restarts now, I get a window in the corner that says 'Custom settings', then a window appears and says that Windows Explorer has stopped working.  I can ctrl/alt/del and open Manager tasks, but when I try to do no matter what to whom, it also stops working.  I not to download anything so I really don't think it is a virus.

  I can't open programs or menus, even if I think I can get a screen of command.  I ran all the tests in the installation disc and did not get any where or the other.

  If anyone can help, I would really appreciate it.

  Thank you

  Mike

  I can show you a workaround until Microsoft fixes their problem.

  As soon as you enter the office hit

  1-CTRL/ALT/DEL to get into the Task Manager
  2. click on the tab Applications (top left corner)
  3. click the new button on the task (lower right corner)
  4. in the Open box, type explore and click the Enter key
  5 do step 3 and 4 once more as quickly as possible

  This should stop the process of recycling the error message

  After stops in the process recycling, you can leave the Task Manager and minimize the Explorer window.  Also, you should be able to leave the Task Manager and windows Explorer now.  If this is not the case, just keep the Explorer minimized window.

  You should now be able to use your computer as usual.

  Let me know how it works for you.  If it works well, spread the word.

• Configuration for the Task Manager error

  Hello
  
  I installed FDQM, IR, FR, HFM in 11.1.1.3.
  
  FDQM configuration is successful. When you configure the Task Manager using the user name Windows account
  
  (Administrator). But it shows the status parameter not valid error. Once again, I tried with DCOM user admin also.
  
  It throws the same error.
  
  Thanks and Rgards,
  Sidhartha.p

  Try this:

  (A) start > run > services.msc
  (B) locate the FDM Hyperion Service Task Manager, right click and choose "Properties".
  (C) click the 'Connection' tab and enter the FDM Service account user name and password as - and apply.
  (D) try to start the service.

  It work?

• When you access all tasks of merger Applications home page, "an error has been received for the task manage worker research of goal setting." This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program/WEB-INF/oracle/

  We have installed version of the Application from merger 11.1.7 HCM and CRM modules.

  It is 2 node architecture IDM IE components installed in a single node and Fusion components installed in another node.

  We are able to start the components of IDM and Fusion successfully, but when users try to access any task of merger application home page, they receive the below error

  
  

  A consumer of portlet error has been received for research of parameter task manage worker objective. Report the error details to the product owner next goal management.
  
  An error has been received for research of parameter task manage worker objective. This task is identified by the HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS code that calls the program module code fndSetup /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF. Review logs consumer and producer for details about this error.

  
  

  
  

  This may be related to your other question about "FUSION_APPS_WSM_APPID-KEY" as newspapers contains exceptions such as:

  oracle.wsm.policymanager.PolicyManagerException: WSM-02081: failed to logon to perform the requested action.

  Please refer to the document Fusion Service account password Expiration causes Portlet producer errors of Application (1486388.1) to learn how to check and set the password. There is also exception:

  javax.security.auth.login.FailedLoginException: [Security: 090302] authentication failure: User FUSION_APPS_PROV_PATCH_APPID refused

  This is probably caused by an expired password, please see Fusion applications servers are not in - password policy error: 9000: GSL_PWDEXPIRED_EXCP: your password has expired (1629927.1).

  --

  Jani Rautiainen

  Relationship with the developers of Applications in fusion

  https://blogs.Oracle.com/fadevrel/

• The Task Manager freezes, but only for my account

  I upgraded my computer to Windows 7 64-bit to 64-bit Windows 8. I noticed something that was if I opened the Task Manager, it would show a frame of stats, and that's all. The Task Manager does not block enough (he is sensitive to mouse events), but no additional data comes, it freezes. Given that there was a problem with the driver for the motherboard, I wrote chalked it up to that and will think it controlled again Asus releases an update for the motherboard.

  I connect to my RT Surface with the same Microsoft Account and noticed that the Task Manager freezes in the same way. I found that it is very strange. On any of the computers my account is running as an administrator. I checked the administrator accounts, other accounts users standard and even the guest accounts and Task Manager works very well on these accounts on the desktop computer 8 Win and the Surface RT. So somehow, a 'setting' is corrupt with my Microsoft Account and floats on any device Windows 8/RT I sign in with this account.

  Any idea on how to clarify the issue?

  Clean boot didn't do. There is potential software conflicts with a single account, and certainly not on a Windows RT device.

  Given that it was just my account I looked to for the Task Manager and found HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\TaskManager\Preferences and deleted registry settings. It resolved the problem.

  I was hoping since the problem sank through the cloud that the fix would be too, but it didn't. I ended up deleting the registry key on both machines.

• Not able to open the Task Manager by ctrl alt del does nothing

  I can't run Task Manager. When I do ctrl alt del, it nothing happens when I do a search for the Task Manager and double click on it I get
  Cannot find C:\windows\system32\taskmgr.exe. When I hold the windows key and press x and then click on task Manger unspecified error. When I go into C:\Windows\System32 , there is none taskmgr.exe. Can't understand why the Task Manager does not work. Looks like I just need to install a file or two but I do not know.

  Hello

  It is not listed as taskmgr.exe. Taskmgr just as an application.

  You might try to open it by right clicking on your taskbar... it is\should have a button to start.

• My tab 'Options files and research', 'Task Manager ', 'Run' & browsers other than windows explorer is hidden and not accessible. Emergency assistance is needed.

  As I said in the title, my problem is that I am not able to acess file and Search tab 'Options', ' Task Manager ', 'Run' & browsers other than windows explore.

  1. in the case of a tab 'Folder and search options' in the tab to organize, in the Explorer window, the tab appears as the hidden and cannot be clicked. The same"Folder and search options" when I looked in Control Panel, the icon was not seen or available.

  2. the same is also the case for the Task Manager. In the click right option on the taskbar displays the"Task manager" tab, but it seems to also be hidden or accessible when I press alt + ctrl + del window shows no option Task Manager or the tab.

  3. when I tried to run ' run the command ' the command window does not come and the following message appears.

  "Windows cannot find"C:\Windows\System32\cmd.exe". Make sure you typed the name correctly and then try again. »

  4. in a similar way when I tried to acess or run the Fireox internet browser, Google chrome and safari browser he showed asimilar message as illustrated tried to reinsall above.i browsers. It is renstalling, but the same error message appears after the reinstalling.   butthere was no problem in access of Microsoft Internet Explore.

  Windows Internet explore, the homepage has changed automatically and it opens the homepage given below.

  http://6-c-c-n-0.-u-.i-k-r-g-1-0-u-5-1-f-3-g-Li-9-p-1-x-t-6-g-l-8-m-q-y-s-k-6-l.info

  I am currently using the Microsoft Security Essentials as my Antivirus which is uptodate. Run full scans with antivirus but the scans is not revealed. Also, I'm a windows user who is also updated regularly.

  So far, I noticed only these problems that make me very difficult to work. The main problem is that I'm not in a situation to format my laptop. Please help me with these problems.

  Hello

  Restart in safe mode and run the antivirus scans here. You have symptoms of an infected machine. Scanning in safe mode will reduce efforts of the virus to avoid detection.

  To restart in safe mode, restart normally, and when the system resets you can press the F8 key. It is point immediately after the screen logo POST or manufacturer initial of the system, and just before Windows starts to load. This will give you a boot menu where you can choose Safe mode.

  While you're here, you must also download and run the tool free malwarebytes here:http://www.malwarebytes.org/ (choose Safe mode with networking to do this). He can catch something that lack of MSE, no security tool is perfect.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Problems with the closure, by opening the Task Manager and Norton Internet Security. Help, please!

  Hello

  I have a HP Pavilion dv7 with Windows Vista Home Premium (64-bit). Until Monday, there is no problem whatsoever with my computer at all. I have not installed or uninstalled, whatever it be, changed settings, done anything differently with my computer. Suddenly it now "hangs" on the screen of closing down. I'll try to reboot or stop using the menu start, and it will stay on this screen indefinitely. Now, I have to manually turn off the computer. I spent on the Support page and studied the Performance issues, and all I get is I have Visual settings that interfere with closing... except my Visual settings have not changed in any way. In addition, I can not properly update my computer or do a system restore because the computer will shut down.

  In addition, the Task Manager will appear no more. I'll press ctrl alt del and nothing appears, just the green icon in the corner of the screen. If I try to right click, no response.

  I tried to do a full system scan in Norton Internet Security but she "leaves" scanning. It will scan correctly when I'm in safe mode, but it comes with no virus, trojan or other problem.

  So in essence, I tried everything I can think of to fix my computer nothing works. It was working perfectly before this week. I have no idea where to go. Any thoughts?

  Thanks in advance,

  G

  Hello

   

   

  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.

   

  Method 2.

  Step A.

  Start your computer in safe mode and check if it starts.

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.

  
  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

   

  Method 3.
  I recommend to run the restore of the system in safe mode and check if it works very well.
  Reference:
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

   

   

  I hope this helps.

   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Task Manager appears for a second and disappears immediately

  Little matter how to open the Task Manager, it appears a second and then immediately disappears.

  Here's how I tried to open the Task Manager

  Right-click on the taskbar

  Ctrl + alt + delete

  Start-> run-> taskmgr.exe (tried it in the start menu)

  CTRL + SHIFT + ESC

  I didn't change any setting on the PC and recently noticed that it is not open even for a second.

  Thanks for your help!

  Shayan

  Hello

  1 have you tried the steps mentioned in my previous post?

  2. What are the results?

  If you need to run an anti-virus program, I suggest using the scan Microsoft security online and find all infections.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

• Security for the family Microsoft offers a key logger and screenshots of visited Web sites?

  Security for the family Microsoft offers a key logger and screenshots of visited Web sites?

  Original title: family safety

  Moved from the community involvement Center

  No it's not.

• How can I reinstall the Task Manager and monitor resource for Win 7?

  I saw a lot of similar questions to mine and problems are resolved for the most part because the person is running in mode 'tiny' in the Task Manager.  And, while the problem of the poster has been resolved, I must still be able to find an answer that actually answered the question: how to reinstall a task manager and resource monitor?

  I don't want to seem rude or obnoxious, but that's all I really need to know. Is it possible to reinstall the Task Manager and resource monitor and how - what is done?

  For a more easy, please take the following response,

  I am running Windows 7

  Parts of the the Task Manager and resource monitor will not run correctly (it isn't tiny mode, everything seems as it should be, they are just not all the work)

  I did a lot of research and analysis and virus check

  I do not have a file to restore good system (whatever the reason)

  I decided that I have to reinstall the program

  So my question is simple: how to reinstall a task manager and resource monitor?  I can't find a download for it on the Microsoft.com site file; Maybe it's there, but I'm not.

  Please don't bother spending time trying to figure what's wrong with my system, you will lose your time (this is the part where I'm really NOT trying to be rude, but I tell you the truth).  I did the analysis, controls, etc. etc.  I just need to reinstall.

  So please, could someone just tell me how to reinstall only the Task Manager and resource monitor.  I don't want to have to reinstall the whole system.  It seems to me that it is not necessary; It's only two programs.  It is possible and if so, how?

  I thank very you much for any help.  I hope that was clear, so no one loses time on it unnecessarily.

  You are welcome.

  There is no download for them because they are part of the full operating system.

  See you soon.

• My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  My pdf files that I am editing keeps "freezing" and I have to use the Task Manager to end the program. I have the latest version of Adobe Acrobat Reader DC and I have 10 windows? Is there any solution for this?

  Hi gregs5153218,

  You can't the PDF files to be changed with Acrobat Reader DC.

  You must have the Acrobat application to edit PDF files using Acrobat. Edit PDF files.

  Kind regards
  Nicos

• 29 Firefox fails to come out properly and continues to run in the Task Manager.

  It is a continuation of a thread found here:
  https://support.mozilla.org/en-US/questions/997448 by Compumind.

  I pointed out that I had the same experience, especially at the opening of the email links in Thunderbird. I reported also that forced me to go back to 28 FF.

  Moses responded by top wire and suggested:
  (1) download a fresh installer of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) rename the folder

  C:\Program Files (x 86) \Mozilla Firefox

  TO

  C:\Program Files (x 86) \OldFirefox

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  I followed these instructions carefully but no joy. When installing 29 FF, not only refused to leave (using "exit") and continue to run in the Task Manager up until I killed him after the opening of links in Thunderbird, but I find that he refused to come out after a simple navigation and links.

  Moses had asked that I didn't answer in the original thread, so I re-post here.

  In my view, that there is a serious bug. With Firefox 28... no problem don't except a minor that I have indicated here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1002089

  Yet once I am obliged to 28 FF, although I miss the nice interface and security patches, I need to have a browser that works properly. My wife never even saw the Manager of the tasks before so that's the problem.

  In addition, "guesses" made with this post, the only other thing usual outside that I do, is to have a security policy about cookies (accept by default... I make exceptions for cookies I want to keep and have several that are "allow only for the session.") I also FF the value delete history of navigation at the exit, but that takes a fraction of a second.

  I look forward to when this matter can be addressed successfully and I am able to use 29 FF (and out properly... I can't wait for my wife to follow all of these instructions and it often close manually in the Manager of tasks... or what I want to do this.)

  Good luck for all Mozilla projects. Having installed 29 FF twice and then back return 28 twice, I'll wait and see how this plays out. Please don't send me the standard "start in safe mode", 'restart with disabled modules', 'reset Firefox' stuff (the last time that completely destroyed my browser). I don't think that is what is happening.

  Moses added that there is a problem with the e-mail notifications passing by, so take your time, friends.

  I think now (temporarily) this bug or problem has its roots in "history leaving Compensation."

  I made the leap after a few game with 29 PortableFirefox and reading the blog post linked here:

  [https://support.mozilla.org/en-US/que.../997918#answer-566755]

  .. .and installed 29 FF on my previous FF28 on my box. I unchecked the "clear history on exit" which was only to delete my history, not cookies or anything else, cor - el. My setting should not accept cookies unless I make an exception. Until the FF developers find a way to do this is functional, I'll just have to manually delete the history.

  Furthermore, John99, you want to maybe privacy.sanitize.sanitizeOnShutdown set to 'False', not 'true' If you want to stop the automatic deletion of the history at the exit (attempt).

  I've been running for about 6 hours. without experiencing the bug 'suspended '. So, I can live with that for now until this bug is fixed. It should be fixed... browsers are supposed to be able to do things like that.

  On the other hand, I could find things go wrong... but so far I'm not having a problem.

  I for several hours and will let you know later if things change.

  Kind regards

  Axis

• How can a member of the family without an account standard security for the family... I have windows 7

  I use to have security for the family, but it has just stopped working.  I need for a family member who does not have a standard account.  I downloaded Essentials.

  Hi jaguar1234,

  The latest version of the parental control now uses the standard user accounts (logon Windows) as a child in the safety of the family. If you need to know about adding a user to the Windows login with standard privileges, please see this link.

  Once you have finished creating a standard user account and that you want to manage under parental control, then follow these steps:

  1. run the parental control on a Windows account with administrator privileges. If this is your first time running the parental control, you need to sign in using your Microsoft Account.

  2. after login, select the standard Windows account that you want to monitor as a child by checking the box to the right of the name of the account, and then click Next after.

  3 on the right, you will see members parental control with a list of drop down option. Click the menu drop-down, and then select Add standard account name.

  4. click on record. Wait until the installation is done.

  5. Once done, you should see the name of the account under Windows monitored accounts. To manage the account and setup of filters and restrictions, to connect on https://familysafety.microsoft.com, look for the child account name, and then click change settings.

  If you are having trouble configuring your parental control, do not hesitate to reply to this post.

  Thank you.