Security update KB2378111 install not on my Windows Vista Home Edition 64-bit SP1 system! Help!
Every other security update installs normally with the exception of KB2378111. I get an error code 80073712. What should I do?
Windows Vista Edition 64-bit SP1 family
See if this sugesstion can help you:
Error 80073712 with Windows in Windows Vista http://www.windowsreference.com/windows-vista/error-80073712-with-windows-updates-in-windows-vista/updates >
~ Or ~.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Tags: Windows
Similar Questions
-
HARD drive not recognized by Windows Vista Home Edition (32-bit with Service Pack 2)
Windows stopped to recognize external 500 GB drive external HARD on my Ascer Aspire 5610Z attached via the USB port. Have tried two USB ports, but won't recognize the device. Seeing of the device lights up and the device can be played on another laptop. OK worked until a week or two ago, but cannot restore because it's on this unit that the backups are done! Windows is 'unknown material' and trying to find the driver, without success. Device Manager reflects an unknown device but gives no description, etc.
Hi Peter St Clair,.
1. did you of recent changes on the computer?
2 are you able to access other USB devices on the computer?
Method 1
See the link below and run them the fixit tool available, check if it works.
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Also, check if the drive is detected and letter drive affected by the management of the disks on the computer.
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter
Method 2
If the previous step fails, then I suggest you reinstall the USB controllers on the computer and check if it works.
Note: If you use a USB mouse, please follow the steps of "Using the keyboard" to reinstall the USB controllers. Windows 7 will reinstall all the controllers automatically after restarting your computer.
Use the mouse
--------------
First of all, please disconnect all USB devices and then perform the following steps:
(a) click on 'Start', type 'Device Manager' (without the quotes) in the search bar and press "Enter." If necessary, click on continue.
(b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".
(c) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and Windows Vista will automatically reinstall all USB controllers.
Use the keyboard
-----------------
First of all, please disconnect all USB devices. Then go through the following steps:
(a) press "Ctrl + Esc" to open the Start Menu.
(b) Device Manager to type in the search bar and press "Enter." If necessary, click on continue.
(c) in the Device Manager, press Tab and use 'Up' and 'Down' to move the selection from 'de Bus USB controllers '.
(d) press 'Right' and expand it.
(e) press 'Down' to move to the first item, and then press "Delete" to delete.
(f) repeat step 5 and uninstall everything under 'controllers of Bus USB '.
I hope this helps!
Halima S - Microsoft technical support.
-
Hello HP community!
I recently got a HP Compaq d530 SFF of the company, where I had my work experience.
Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.
I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.
I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).
Maybe someone has a suggestion how to fix this?
I've already updated the version of the BIOS at 02.44 (later I could find).
Thanks in advance!
Yours sincerely Simon Cahill
Beatsleigher,
Not all memory is the same, even when picking PC2700. Did you buy non ECC?
Here is a guide on the configuration of the memory for the D530SSF
-
Hello
I searched for a solution upgrade my Inspiron 1525 notebook, pre-installed with Vista Home Premium 32-bit when I bought it.
The goal is to prepare the way for upgrade to Windows 10.
I need to start with Windows 7 or 8.I couldn't find a way on the Dell Web site.
Thanks in advance!
IsabelleHello
Please write to us!
We would like to inform you that the Inspiron 1525 has not been tested for windows 10 and we do not suggest that you upgrade to the version of windows
Nicely private message the service tag and your email address.
Thank you
Robin
-
The update of window tried to 4 updates. Some were installed some has failed. Here are the ones failed.
Update for Microsoft Office Outlook Junk Email Filter (KB975960)
Update for Microsoft Word 2007 (KB974561)
A security update for the 2007 Microsoft Office System (KB973704)
Update of security for Microsoft Office Excel 2007 (KB973593)Please give advice on how to solve this problem.
Thank you
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows vista home edition 32-bit premium home of friends through town error code 8000-ffff
Have been engineering with the technicians of microsoft for 2 days now and again tomorrow for day 3. They take the ctl of the computer and tried many tricks to solve the problem of update to download without success. Now they want to take my portable hard drive to my friends and backup all program files so that they re starting the vista program. Wow tomorrow will be another genius of day session. Is it legal for me to take my Vista disk to my friends and do the reset on their computers to try to solve this problem?
[I won't question Support Ms.]
Vista SP1 or SP2 installed yet?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
The above, have you tried a Reset (in mode by default and aggressive )?
http://support.Microsoft.com/kb/971058~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Any suggestions on how to sync my iPhone to my PC? I have Windows Vista as operating system.
Thank you
Hello
There is an Apple Help link at the bottom of the link I gave you
you try to syn software Apple with Apple hardware
I suggest you contact Apple
or try their forums
-
My computer has Windows Vista Home Premium 64 - bit operating system. When I try to get updates, there is an Error Message Code 8000 ffff. How fix/resolve this problem?
Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
http://support.Microsoft.com/kb/946414How to reset the Windows Update components?
[Launch the difficulty mode by default and aggressive , if necessary]
http://support.Microsoft.com/kb/971058
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft -
Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP. Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions). Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows. I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not. I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.
I have the Vista installation CD, but not the verification code necessary to reinstall. It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?
Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless. An internet search has a line of golf apparel and a few articles in German... Any ideas? Thanks, Lara
If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.
-
Operating system of Windows Vista Home Premium 64-bit and Web folders
I have a person how contacted me via his personal computer. The laptop runs Windows Vista Home Premium 64-bit operating system. He tries to use his web folder. The system is up-to-date on all Microsoft Patches, including Service Pack 2.
When you try to add a network folder by using the network location feature add to create the web folder a message occurs the link is not valid not a folder. However, I know a valid folder because it works on Windows Home Premium Service Pack 2 32-bit very well.
Yet once, why he does not on Vista Home Premium Service Pack 2 64-bit? Y at - he of the additional fixes that do not appear on the Microsoft Update?
I also have the same problem. The KB907306 does nothing for my system.
Any other ideas?
-
For Windows Vista (KB2419640) security update will not be installed keep getting CODE of ERROR 8E5E0147. MS Windows Vista Home Basic 32-bit SP2 operating system.
Help, please
Thank you
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
-
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:
WinVer the OS details appear. If no SP1, download & install it
https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx
Use this link for download.
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista
This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'
Microsoft.
-
I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?
Hi Vishal,
1. what happens when you try to install Windows Update and the fix, you get any error message or error code?
2 have you made changes on the computer before this problem?
3 is the limited issue during the installation of specific updates?
Problem when installing windows update, see the following Microsoft article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602
Notes:The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
Keep us informed on the status of the issue.
-
Why Windows Vista Home Premium 32-bit installs not Windows updates?
I am not able to download and install Windows Vista Home Premium 32 bit windows update. This Gateway laptop has always been able to quickly and easily install the update by clicking windows update. However, since the introduction of Windows 10 it has been a lot of your time trying to install updates. I had this same problem with Windows 7 too. Never before there was no problem for the two operating systems. Installation of Windows updates has always been easy and fast without any problem. Running the troubleshooting isn't good and hunting error codes has been unproductive. What the hell is happening?
Hi Joe Cool1:
'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems. The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.
There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista. The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.
You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/. Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.
------------
32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS -
If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
Hello
You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.
32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.
32-bit and 64-bit are different operating systems.
See you soon.
Maybe you are looking for
-
New browser won't work... I'm stuck at 10.4.11 because of the need for the classic.All retro improved browsers? I've already replaced the old browser with in-an executable.You have faithful a warning, circumvent, alternative, something like that...is
-
I read another post on this forum, but I can't seem to make it work as I'd like. I have a constant matrix 1 d in the block diagram, which I want to output to a digital indicator on the front panel. The thing is that I wanted, it displays the first it
-
When you type e-mail, a new tab opens whenever the letter 'T' is reached. Also seems to be some shortcuts introduced when various keys are affected. Very frustrating and cannot understand why this happens. Also in the case of Word, often together sen
-
Windows 7 Pro usually access my Windows XP PC at home
I'm trying to send files from my windows 7 pro pc to my windows xp pc I had my pc windows 7 to show my pc under windows xp in the list of network pc but when I click on it, my pc windows 7 ask you a user name and password that I don't know and never
-
Anyone know why you cannot telnet or traceroute to a PIX? What is happening with this?