See 4.6 Client installed on Windows 7 Home edition does not connect to the Manager

Similar Questions

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

  I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

  Thank you

  To work with iOS 9.2, you must update iTunes to 12.4 v.

• Satellite C660-108 - Windows XP Home Edition does not install

  I try to install Windows XP Home Edition on a Toshiba Satellite C660-108, without success.

  I changed the BIOS disk in "Compatibility" mode (what is the same thing as "Legacy IDE"?) by following the instructions on a Yahoo Answers question on the same issue.

  What has improved the situation, in what I now get an error message a few minutes after installing XP said "Starting Windows" instead of immediately after. The error message is the same that I have already received and is as follows:

  "A problem has been detected and windows has shut down to prevent damage to your computer...". "Technical information: * STOP: 0x0000007B (0xF78D663C, 0xC0000034, 0x00000000, 0x00000000).

  Thanks in advance for any help,

  Luke

  PS - I'm a mac user and do not have much experience in the use of Windows laptops, so I need instructions spelled out clearly enough if possible.

  The error could be related to drive HARD and the setting in the BIOS of the controller...
  Probably, you need to install Win XP using SATA AHCI mode and to add the driver SATA as described here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm
  http://APS2.toshiba-tro.de/KB0/SPD4603LT0000R01.htm

  I found a similar description in the MS forum:
  http://answers.Microsoft.com/en-us/w...4b511ed?auth=1

• Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

  So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

  Hi ZachRhodes3,

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  5 steps: how to set up your network wireless home

  For reference:

  How can I troubleshoot network card?

  Wireless network card: frequently asked questions

• My product key of windows xp home edition does not work?

  Good while my laptop was a major virus, so after 5 antivirus, antispyware programs could not locate or get rid of it, I had no choice but to re - install windows xp home edition. But the problem is that my product key does not work. Why is this and what can I do, I don't have money to buy another computer laptop/product key

  Dell inspiron 6400

  p.s the guarantee expired already tried that one.

  In this case, you are probably using the wrong type of disc.

  You MUST use an OEM disc with an OEM key in WIndows XP

  You MUST use a disk of Windows XP Home Edition with a WIndows XP Home Key

• Windows XP Home Edition does not load in any mode after reboot to uninstall Norton

  I wanted to get rid of Norton anti-virus, then, I have downloaded and run the Norton Uninstaller. After what seemed an eternity he finished and asked me to restart the computer to complete the uninstalation. I clicked the botton "Restart now" and after the screen, which shows the bios is nothing. No loading screen, no beeps or anything else, just black. In addition, it does the same thing in all modes.

  I removed the HDD and an IDE to USB for connecting to my mobile backup (Win7 Ultimate) and performed a virus with TrendMicro Titanium antivirus scan + and scan with malewarebytes paid version maleware. No virus or maleware found. So, I ran a check/repair through backup with no found error disc.

  I do not have a XP or 7 CD repair/install, nor am I money right now. I really need to get going again.

  Infected computer:

  Compaq Presario M2000

  Windows XP Home Edition SP3

  Processor Intel Centrino Pentium M 1.5 GHz

  1 GB of RAM

  Intel Extreme Graphics 2

  Machine backup:

  Dell Inspiron 1501

  Windows 7 Ultimate Edition SP2

  AMD Turion 64 MK - 36 2.0 GHz

  3 GB RAM

  Integrated ATI Radeon Xpress 1150

  Looks like you somehow corrupted the bootloader.

  If I'm not mistaken, you can technically download disc for Microsoft Windows XP SP3 OEM HOME legally, as long as you use your current license.

  You can also communicate with Compaq and request a repair disk.

• Satellite Pro S300-11Y - downgrade from Windows XP Home edition does not work

  Hello

  I have a SAT PRO S300-11 since January 2009. It came with CD to downgrade to Windows XP, and I did several times over the years without any problem. But now I do and what finish to downgrade, when done last reset, windows starts to have problems and doesn t work.

  But if I do not the last reset on arrival of the downgrade the machine works perfectly, but when I do reboot then when windows starts it works. I try 5 times and still the same. I come back to windows original vista (I did CD to do) and it happens the same problem.

  Any help greatly appreciated,
  Thank you and sorry for my bad English.,.

  Jordi

  My English is not so perfect, but to be honest, I don't understand you.
  Do you mean by reset? Do you mean, finally, restart?

  By default the BIOS settings and try to reinstall Windows XP Home edition recovery image.

• Windows XP Home Edition does not start: System Configuration Error Code purple?

  I ran recently on my Windows XP Home Edition SP3 computer system recovery and once the recovery is finished I rebooted the system and then this message and I'm stuck here.

  I don't have any disc that came with the computer because it was very long ago already. I tried to download the 'Home Edition Set Up disk for Floppy Boot Installation of Windows XP"Microsoft, but I can't launch the ff:

  Windows XP Home Edition
  Windows XP Home Edition SP1
  Windows XP Home Edition SP2

  I can't create the configuration of disk for home edition, SP1, and SP2 because this computer I use currently is a 64 bit and no floppy drive. That's why I downloaded this instead:

  Windows XP Service Pack 3 - file to Image CD ISO-9660

  From:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2fcde6ce-b5fb-4488-8c50-fe22559d164e&displaylang=en

  I burned a DVD ROM, but I don't know what to do next. After burning, I reinserted the disc to your computer from the active autorun. Then I inserted the disc for my Windows XP that has "System Configuration Error" and I tried to restart it but theres just no autoplay or anything that the computer always crosses the "System Configuration Error" message and I don't know how to access the set up disc. What should I do? Help please... :(

  Hello

  Try the methods listed in the section below and check.
  How to resolve configuration errors by using the System Configuration utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Windows Media Player says does not connect to the internet.

  I keep trying to get the media guide and open my information center for my songs and Media Player says that its work offline.  I went and checked to make sure that work offline mode has not been verified and is not, and I even checked and unchecked it.

  Hi tinytim32927,

  1. what version of Windows Media Player?
  2. don't you make changes before the show?

  Try these steps and check the result.
  a. start Internet Explorer.
  b. click on the Tools menu and then click Internet Options.
  c. click on the Connections tab.
  d. under numbering and VPN settings, click the broadband connection, click settings and then click on automatically detect settings.
  e. click OK.
  f. check if the problem persists.

  See programs Internet in Windows XP can not connect to Internet

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP Home edition does not charge up - screen Toshiba and then nothing

  I opened my computer to stand by earlier. And received an error message such as:

  WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
  Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

  I also tried to "last good configuration" but who also refuses to load.
  I can, however, in the BIOS.

  The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

  I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

  Is this a hardware problem? I lose data?

  I am aware that my system was clean and I was using a good anti-virus.

  Please please let me know if you have any suggestions or comments.

  Thanks in advance, Max...

  Hi RisSsky,

  you are in a deep deep sh... t... No. not really...
  Looks like the filestructure hard disk is damaged.
  the hard drive is recognized by the bios? means, it is listed as a device?
  There is a sound of the hard drive? scratch or buzzing or ticking?

  CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

  don't panik, we will do things.

  2 options to solve this problem:
  the first and save:
  -Remove the old hdd (you need later)
  -get a new hard drive and make a recovery/installation on the new drive.
  -also get a usb - hdd connector to access old data hdd and copy on the new disk.
  or the 2nd:
  -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
  Be aware that if there is a problem it will get worse...
  -start in safe mode

  If you're lucky, the 2nd option will do.
  as said before I'd do it "the safe way.

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• Satellite L450D - 13 X - audio driver Windows XP Home edition does not work

  Hello

  I have a Satellite L450D-13 X, who was on Windows 7 64 bit, but I just put XP on it, hoping for better game performance.
  I downloaded all the drivers XP Toshibas and all seem to work except the sound. I've been following discussions about this anywhere and try some of the suggestions that end up being for a slightly different model, but nothing will do.

  Help, please.

  What exactly is the problem?
  Sound card is properly installed in the Device Manager?
  What version of Windows is installed (SP2 or SP3)?

• Windows 8 Mail App does not connect to the Outlook account

  Recently downloaded and installed Win8, no obvious problems so far.

  I want to set up my "Mail" app to get the mail on my outlook.com account. However, every time I get back the address email + password who logs me in me oriented web Outlook.com account, he said 'we could not find settings, please provide more information' and asks the domain names and the server.
  I don't know where to go from here, I have to provide some servers to connect to my outlook.com account or is there something else, I'm missing?
  My outlook.com account is configured to receive emails from other pop account. He receives these fines in the Inbox, no apparent problems.

  I discovered the root of the problem and fixed it (I suspect it's what Mark Bu said, but in a different way!)

  My outlook.com account is an account that is only associated with my windows user account, based on my own e-mail account as a connection made by myself in order to use integrated Ms. There is no outlook or hotmail related account. Despite this, I use outlook.com to receive e-mail from my other Inbox via pop and "receive mail from other accounts".
  Trying to connect to outlook.com fine online works, try with mail app fails with this, even if it's a known workaround solution to get pop mail on the win8 Mailer application.
  My solution was to simply go to 'rename the account' to outlook.com and create an e-mail address for microsoft based 'real' (@outlook.com) and migrate my windows account for this. Post instantly connected without problem, and my redirect pop still works.
  Pity that couldn't stop time on the chat line for microsoft technology, it just kept saying 'call your provider of domain for more details'. It could have been resolved in 30 seconds he said "you need a real Microsoft based outlook.com e-mail use it»