See the direction of the North on the cards

Similar Questions

• MAX does not see the cards as DAQmx

  I have three cards OR in my machine: PCI-6602, 6120-PCI and PCI-MIO-16-4 (aka PCI-6040E).  For some reason any my measurement & automation explore (MAX) does not see them I expect.  He sees the card PCI - MIO in the DAQmx and NOR-traditional DAQ records, but he sees that the other two in the traditional NO-DAQ folder.  I should be seeing them all DAQmx AFAIK.  I read in a post on this forum that I can be a corrupted database MAX; so, I renamed and restarted does not.  I have applications that I programmed in Delphi that see, acess and use all three cards using traditional DAQ, so I know they work, at least to some extent.  When I use LabVIEW, he sees only the PCI - MIO map for operations of DAQmx and I'd like to find a way to make all three of them consider DAQmx.  I believe all three cards are compatible with traditional DAQ or DAQmx.  My installed software versions are: LabVIEW 7.0, MAX 4.2.1.3001, NOR-Spy 2.0.0.16, 1.70 OR-488. 2 NOR-DAQmx 7.0.7f0, NOR-PAL 2.0.0 OR-SWITCH 2.00.49156, NI-VISA 3.1, NOR-DAQ 7.4.4f7 traditional (I also tried 6.9.3f4 version without success).

  I hope that it is something with a simple fix.

  Thanks in advance to those who take the time to read and respond to this message.

  Thank you

  Neil

  Did you look in the Readme for DAQmx 7.0? It was the first version and these devices were not yet supported. The latest version of DAQmx you can perform with LabVIEW 7.0 is version 8.1. These cards are listed as being supported.

• Not able to see the cards of weblogic console

  Hello
  
  I installed weblogic 10.3.3 and soa 11.1.1.3 as well as the base XE and RCU 11.1.1.3 data. In the weblogic console, I am able to see DbAdapter and AqAdapter, not Abel to see the remaining cards like FileAdapter, FtpAdapter, OracleAppsAdapter. Can someone help me...
  
  Thanks in advance...
  
  Published by: 847859 on April 25, 2011 03:49

  These are the resource adapters that must be installed:

  FileAdapter
  DbAdapter
  JmsAdapter
  AqAdapter
  FtpAdapter
  SocketAdapter
  MQSeriesAdapter
  OracleAppsAdapter
  OracleBamAdapter

  you don't see anything strange about them in the newspapers?

  In the file config.xml against your domain, you should have something like this:

  
  OracleBamAdapter
  AdminServer
  RAR
  C:/Oracle2/middleware/Oracle_SOA1/SOA/connectors/OracleBamAdapter.rar
  329
  DDOnly
  nostage
  

  It aims at something?

• Asustek, vista ultimate installed the driver, but MC Mercury capture card do not see the map?

  In Windows Vista Ultimate, I have an Asustek Mercury capture device. After install Vista see the card and install the driver. When I try to configer the card in Windows Media center, and then I get that there is no tuner devices!

  How can I solved this?

  Concerning

  Joop

  Hi Joop,

  ·         The TV tuner appears in the devices under sound, video controllers Manager?

  ·         Your TV tuner card is updated?

  Follow the suggestions below for a possible solution:

  Method 1: Look for errors in Device Manager

  a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  b. in Device Manager, look for the device, then double click on the name of the device.

  c. the general tab look for the status of the device for any error code indicated.

  Check out the link:

  Get help with Device Manager errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Method 2: You can also visit the following links and check if it helps.

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

   

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  Let us know if that helps.

• Adding SCSI - HOST OS card works fine, GUEST operating system does not see the new hardware

  I have a HOST Windows XP Pro SP3 with VMWare v6.5.2 running Windows Server 2003 R2 STD, SP2 as OS GUEST running on any new Dell Precision T3500 Workstation.

  I've closed the COMMENTS and then HOST. Installed an Adeptec SCSI 39160 card in the PC. The card is a 64-bit and is installed in a PCI 32-bit slot. (It is backwards compatible with 32 - bit)

  Powered on PC. Install the drivers of Adeptec on the HOST. Works fine and I can see the card under Windows XP. Rebooted and everything is always OKm POST shows the installed card and search devices. I have no device attached at this point.

  GUEST operating system has started and it does not automatically detect the card. Tried to run the Add Hardware Wizard and same result. Tried to use VMWare to install the new Hard ware with no result.

  Can tell you how I can get the OS TO see / use the new SCSI card?

  golden rule:

  old guest will love the buslogic controller

  new comments will love the lsi-logic controller

  It depends on your guest

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Replace the card wifi Atheros on Satellite A210-12 q (PSAELE)

  I tried to replace the Atheros card build-in with an Intel Pro Wireless 3945ABG LINK: [http://www.intel.com/network/connectivity/products/wireless/prowireless_mobile.htm]
  But for some reason any machine does not see the card.
  I tried with three types of Intel IPW3945ABG cards and none of them has been recognized by my computer.
  Is the cards intel not "compatible" with my computer or come into conflict with other hardware components.

  The card Atheros build does not work under Linux (it works quite :-(), so it is very important to me, to get the Intel working on my computer card.

  Hello

  the problem is that your computer has an AMD processor, so if you try to install a WLAN Intel card who needs centrino technology that is ONLY taken in CHARGE by the Intel platforms, then your won´t machine recognize the card. To answer your question: the map you´re trying to install is not compatible with your system.

  I wonder why your card is not working properly under linux, I have 2 machines with integrated atheros cards and they work like a charm (Ubunutu and Gentoo).
  So if you describe where the problem is so we can perhaps find a solution and you should not try to install a card intel...

  Welcome them

• Cannot see the whole picture when you move into a smaller template with the direct Selection tool

  Hello!

  I recently got my laptop cleaned in preparation for examinations and such (I'm in high school). As I belong to art class, when Basic programs have been re-installed we also got the Adobe programs, but we got the CC 2015 version instead of the version CS5, we had earlier. After a stressful week, I finally had time to sit and work on my projects aside, but I quickly found a big problem which stops at my work. After re size the image at the size I want, I don't see the whole picture when I move in the smallest area with the direct Selection tool more. Photos I use are generally quite large, that I've tried to work with now are 451mmx338mm after the scaling down and I have a 'framework of standard departure' to 60mmx15mm (I make the bosses), so now I have basically has to guess my way toward a good composition...

  Can I make it work again?

  Click on the image and hold the pointer of the mouse for a while. And then drag.

• Laptop computer connection directly to a projector and cannot see the screen of my laptop

  I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop.  When I hit the function key for display on the big screen, my laptop darkens.  I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there.  My laptop is running Vista Business Service Pack 2 and two weeks.  Thanks for any help you can provide.

  Hello Shawn,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.

  Also, follow the steps and try to set the screen parameter as follows:

  (1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.

  (2) setup that monitor the as a 2nd external display (projector).

  (3) click on apply and Ok.

  Restart the computer to see if you are able to see the screen on laptop and projector.

  You can also check with the computer manufacturer to check if they have additional parameters to be changed.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I see the output directly in the console window

  Hello

  I'm new to the development of blackberry10. I am developing a new Cascade Application C++. I want to view the log output or console information in the console window.

  QString categoryName = "Hellooo";

  fprintf (stdout, "%s listttttttttt", categoryName);

  I'll try it, but I get the error message. Can someone help me see the log information to the console.

  Thanks in advance

  You can use;

  qDebug()< "my="" message,="" listtttttt"=""><>

• BBY Smartphones blackBerry 9900 - cannot see the images directly on the phone

  Hello
  I can't see my pictures on my blackberry 9900. It will allow me to take pictures but when I want to open the Gallery, it will not be open. It displays the message "you can take pictures with the camera or sync with your computer. visit www.blackberry.com/mediasync. I really do not understand.
  The only way I can not see my photos is when I am connected to my blackberry desktop (or if I do an exploration the)
  blackberry records).
  I don't have media (sd card) inside car.
  Just after you take a picture, the picture is at the bottom left of the screen (small), but if I click on it nothing happens. Then I am not able to view this picture in my media > pictures.
  I've never synced my BBY with the desktop software.

  Can you please help me on this?
  Thank you and best regards,

  Hi royalliste41 and welcome to the community of BlackBerry Support Forums!

  Have you ever been able to see the pictures you've taken on your smart phone BlackBerry itself? Have you tried to perform a battery pull to see if the media application reindexes the photos?

  Thank you.

• I want to max my screen to be able to see the images in the messages. The ' to, subject, to and BCC occupy 25% of the screen - one under the other.

  When I view a message it is a title showing the ' to, subject, to and Bcc' message under each other in a group which occupies about 25% of the screen. This prevent me to see a complete picture of the message. Can not change this option for do not show this information at all because it is used to occupy a large part of the screen?

  Not being able to increase the resolution will mean less can be displayed, but obviously, it is a personal thing and you should be able to see the screen comfortably.

  However, I noticed your picture looks like quite like mine, although similar.

  The pale blue bar at the top of the tab should display icons "Mail Toolbar" which does not appear in your screenshot.
  It should have these buttons or icons for example: get Messages, write, address book, Menu icon and research.
  If it has been disabled, then the pale blue box would not be showing. Thus, it is a query.

  Q: do you have 'tailor-made' bar messaging tools to remove the icons from buttons?
  Customization allows you do drag icons on and off the e-mail toolbar. Do you have this is thinking he might save you space, but in fact you still have the domain - the mail toolbar, but it is now empty?
  If you have removed them in order to create a space, I would say that you put all the icons back, so that they are available. It is easier to hide the view by disabling the e-mail toolbar.

  View > toolbars > mail toolbar
  Q: is the messaging on or off toolbar?

  Disabling should you save space by deleting the pale blue box above, but it still won't create the kind of space you're talking about. Baring in mind that each image can be a different size.

  The area with of, subject, to and Bcc, should also show several buttons for example: answer, before, Archive, Junk, Delete and another button called 'other Actions '. These buttons appear on the right side. Maybe you have them, but they cropped in the displayed image.
  If the area to which you refer has done more than just the titles. It also offers you a way to click on for example; Respond directly from the email that you look.

  What version of Thunderbird do you use?

  Have you tried the 'Conversations' addon because this will reduce the headers?

  There is also another Addon called "Headers Compact" will be also reduced the size of the headers:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/

  But you are only going to win some space which cannot result will be enough to see the large embedded images.

        -------------------------------------
  

  The person who transmits the image should really be sending these images in the form of attachments, so that you can choose to view by using the correct application of the program and/or reduce the size of the screen if they are incorporating the image in the content.

  If they refuse to send the image properly and persist in sending large embedded images, then you may not be able to see full images without scrolling you have no control over how they sent the image; It could be small or huge, which will affect the ability to view an image all at once.

  For large images nested:
  The best option for you would be to right click on the image and use "save image under" choose to save the image to your computer in a right example folder: Photos. Then open and view them using an appropriate such as "Windows photo Gallery" or similar application.
  So if you choose to delete the email you don't waste the image she's saved elsewhere on your computer.

• How to see the report on health v29 firefox?

  My firefox works slowly and I wanted to see the report on the health, but I got lost in the new interface of firefox, of course I really like it but right now I'm lost and cannot find how to open firefox report health function.

  So can someone point me in the right direction?

  Thanks in advance

  You can type about: healthreport in the address bar and press ENTER.

  Also try to read Firefox is slow - how to make it faster

• can not see the stars of review and comments from clothing sites

  E.g. #1 = 'Landsend.com', click on 'man', 'pants '.
  http://www.landsend.com/IX/mens-clothing/men/mens-pants/index.html?SEQ=1 ~ catNumbers = 1 & 2 ~ 23 & visible = 1 ~ 2 ~ 1 & cm_re = D-4-8 & pageSize = 72

      Can see pants and pictures, but where the usual 1-5 *s are, it says "Rating".  I click on the "Men's Pleat Front Traditional Fit No Iron Dress Twill Trousers" (the first pants picture/option, Item # 426850-A61) and up pops all of the information EXCEPT the photo/s that should be on the left, and the "Views + Reviews" with all of the comments under that.
  

  For example #2 = "underarmour.com', 'Man', 'Accessories', ' Backpacks and bags ', 'AU Hustle Storm backpack.
  http://www.underarmour.com/shop/us/en//pid1238440-040#BV-reviews

      Can see    "****1/2* (2) Read All Reviews"   but the reviews are missing and when I click on "Read all Reviews", the screen moves down, but nothing else changes and the reviews are not there.
  

  For example #3 = "eddiebauer.com', 'Man', 'Shirts',"Classic Fit legend wash Oxford Shirt - solid short sleeve"
  http://www.eddiebauer.com/EB/men/shirts/index.cat

      Under "Men's Shirts", I see the stars and how many people have rated it [ex.- *** (17)].  If I click on the ratings/stars or on " Classic Fit Legend Wash Oxford Shirt - Solid Short Sleeve", the next page shows up-
  

  http://www.eddiebauer.com/catalog/product.jsp?ensembleId=44679 & & categoryId = 9 & categoryName = SHIRTS & pCategoryId = 2 & pCategoryName = MEN & gpCategoryId = 1 & gpCategoryName = EB & catPath = ~ ~ categoryId = 9 ~ ~ categoryName = SHIRTS ~ ~ pCategoryId = 2 ~ ~ pCategoryName = MEN ~ ~ gpCategoryId = 1 ~ ~ gpCategoryName = EB & viewAll = n & pg = 1 & cmPathInfo = null

     ...however, the stars, ratings, and comments are not there.  The picture/s of the shirt are there, as well as the size, color, add to bag, etc.
      On Amazon, I can see the ratings and comments.  This tends to be a problem with clothes companies and their customer service has not been able to tell me why I can't see what should be there.  Internet Explorer Does show the missing info; I haven't tried Chrome.  I want to work with Firefox.  Any suggestions?
  

  On the first page, next to the marking of Word, I get five sailboats (blue is good, gray is not good). This image comes from the external site "landsend.ugc.bazaarvoice.com." You can see the images if you load them directly? Here is an example: http://landsend.ugc.bazaarvoice.com/2008/2_8/5/rating.gif

  When I click through to the pants, the first image that shows on the left is this one: http://s7.landsend.com/is/image/Lands.../426850_AJ13_FF_KHA?fmt=jpeg, rgb, qlt = 80, 1 & op_sharpen = 0 & resMode = sharp2 & op_usm = 0.5, 1, 3, 0, & icc=sRGB%20IEC61966-2.1,relative & iccEmbed = 1 & rgn = 0, 0, 2000, 3000 & scl = 5.882352941176471. If you click on it directly, it works?

  If you are unable to view these images directly, sites can be blocked. Check out the first section of this article: the problems that cause to not show images.

  If you CAN not display these images directly, but not when they are incorporated on the main site of Lands End, you may be blocked "third party" images. You can check here:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste perm and make a pause so that the list is filtered

  (3) if the value is not 1 (and the line is in bold), click permissions.default.image , then click Reset.

  If the above fails, it could be a problem to Add on. Could you try Mode without failure of Firefox? It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• NB100 - can't see the indications on the keys on the keyboard

  I just bought a netbook NB100 for my partner, my first thoughts were, what a great little machine is, well I liked all about it, so I tried to use it. The keyboard, what a nightmare, gray lettering on black keys, if you had a light directly above the keys, that's fine, in the shade or in a shaded room, I could hardly see the lettering, blue key functions stood out more.

  Let me know what you think, or am I a little on top.

  concerning
  Stephen

  It seems ok to me.

  Try increasing the brightness of the screen so the keyboard lights up more.

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail