Seen with his questions and planning tasks.

Similar Questions

• When I watch a news clip or anything this either with his stops and a few minutes later she does it again.

  When I watch a news clip or anything this either with his stops and a few minutes later she does it again. Can someone help me with this problem. I just watch something unless it is interrupted.

  Hi suzyra,

   
  1. What is the operating system installed on your computer?
  2 are watching you the video online?
  3. in the affirmative, you use Internet Explorer to watch videos online?
  4. What is the version of Internet Explorer installed on your computer?
  5 are you facing this problem with any particular Web site?
   
  I suggest that you follow the steps in the link and then check if it helps.
  The video problems with Internet Explorer

• A friend used my computer and sync is set up with HIS email, and I would like to delete that and put in my e-mail address.

  I don't remember set up sync ACCT. But am not computer savvy (can get). Check Sync and discovered an acct is set, but not with my email. My friend used my computer and I don't know if she wanted to do, but now ACCT. is his email, and I would like to change this, but am afraid to delete all data and make a slurry of something already messed up.

  Use: Tools > Options > synchronization > ungroup this device

• I want to prepare an old iOS9 iPad to send to an old lady of 82 year in Greece, using my macbook. I intend to do the following: 1 login to my account to /iTunes from apple. 2 make a new for her with his email and

  Can I put an old iPad up with a new Apple account (email and password) to send overseas to a friend. How do I do that? It is what I have and have not understood until now. Already synchronized and set a new iPad with my account on my MacBook Air. . Fact

  Can I restore the oldiPad and when he asks me an Apple ID I log out of mine and create a new one by putting into his email and password put the address and and I don't want to put in a credit card, the value as 'None', then continue to synchronize the former iPat to the new account, but on my computer.

  Or do I first log out of my own apple account before you restore the iPad and create the new account. Then restore the iPad and give the new account details?

  I would then download a few free applications, like Skype, team Viewer, kindle, etc., using his account.

  When I disable allow the iPad to my account/compluter/iTunes/iCloud/etc? I know that it's going to be synced to my computer, and she'll have to re - synchronize with its own computer (windows7) using the account I created for her. She will always be the apps that I have loaded on through my computer?

  More important still, when log out of his account and back in my own, on my iPad new and already synchronized, will I even when my own music?

  I would be very grateful if someone could take me through the steps one by one, as I am confused by all the different directions I think

  Hello

  You must disable find my iPad.

  Then restore back to factory settings.

  Then its ready for the new user.

  See you soon

  Brian

• Sound appears choopy on the computer, problem with his system and multiple programs.

  System model: OptiPlex GX620 BIOS version: A07 Dell Inc.

  Operating system Microsoft Windows XP Home Edition Version: 5.1.2600 Service Pack: 3.0

  I started to get choppy sound I think immediately after trying to play dvd on pc Sony mini. I tried all the xp help lines but nothing. So I tried to restore to previous date n that he had failed on 3 different dates with system check points. Any ideas? The sound is choppy on the system of sound waves, music from Media Player, itunes, the journal and disconnection of waves.

  Original title: his jerky

  I have attached the codecs that they did not help. I finally got a restore to work prior to the date that has begun and the problem seems to have disappeared. Then maybe some settings have changed in the background or I had a virus any. Has done a lot of analysis, but nothing came. Do not know if the same thing happened I I put in another dvd mini...

• How can I publish a module with random questions (and question pool) in a single swf file?

  Hiya,

  What I need is questions randomly in a learning module all exported from captivate 4 in a single swf file, what I get is the swf file and a SWF of pool, is it possible to integrate the pool in the same module/file?

  There will be a place somewhere on the LMS where the SWF file is stored.  But the question pool to get SWFs in the same location would be more trouble that it's worth.

  Some providers of LMS simply not allowing for the fact that training may require more than one file to run it.  They have designed their systems with PowerPoint and PDF or MS Word in mind, all cases where one file is all you need.  These MOVIES are more like content management systems than modern learning management systems.

  If your LMS insists that it cannot operate in this way, then you may need to forget the question pools.

  But I think that you will have even greater problems.  You will wait get marking and follow-up of the results of this LMS for this internship?

  You be obviously NOT use SCORM as publishing option because SCORM still requires JavaScript code to implement the API that allows communication between the LMS and the module course.  Using rather AICC?  Output of Captivate, same AICC requires Javascript, so you need more than the SWF file.

• AE sudden drop, his question and ghost image rendering performance.

  Hi, I'm under CC2015 last, AE on a computer 64 bit Windows 10 Pro with the following specifications:

  Proc: Intel Core I7 - 5930K (3, 5 GHz, not overclocked)

  RAM: 32 GB

  GPU: AMD over-pants W7100 8 GB of DDR5 RAM memory

  Each driver is up-to-date.

  I experienced these problems since yesterday without reason at all (no new updates or new software any newly installed)

  It started with a composition Dynamics first sent link (CC2015, later) EI, mixture of several sources (mxf DnxHD, mp4, mp3)

  • The first problem is that whenever I tried to make to my comp in AE, even forcing activation of the sound on the export, the rendered file contains a VOID soundtrack.

  It occurred when the default rendering in a NON-DESTRUCTIVE (Animation codec). AVI file.

  I tried to normalize my sources in first each of them exporting to DnxHD. The mp3 and the MXF files track into an AIFF file with no effect.

  When I switched to a NON-DESTRUCTIVE (codec Animation) . MOV file, the sound was present and functional, but it's just a workaround, not a solution.

  • Second problem is that there was a significant decrease in performance I tested by the rendering on a FullHD 5' computer with a single solid layer in it. The rendering is 5 minutes of erratic progression.
  • The third problem is that no matter what codec or the container used in the render queue I always end up with a file in which whenever it was supposed to show the bottom of the comp, I have an image of 'Phantom' of one of my layers appearing.

  Even during the passage of each layer, this image is the display constantly through the comp.

  It disappears only when clean the cache, but comes back with each rendition. Even if the layer source of this image is not present in the COMP.

  This image is displaying in first when using the model of dynamic links.

  Here's what it looks like when I open AE.

  Note that the model is empty and yet, there is a ghost image.

  

  Cleaning the cache, restart several times, has no effect.

  Last thing I will try is to re - install After effects but I have little hope that it will solve anything.

  What should I do now?

  EDIT: I have now if she has something to do with the new preview, but when I go to any computer, image is not updated in the comp Panel. (caps lock is off of course)

  I have used no third party plugin on this project.

  As expected, AE re-installing has not effect.

  There is a bug in 13.5.1 AE where it is not sound unless he renders a MOV file (or make you through Adobe Media Encoder instead of the queue of EI). The value is fixed in the update of the following month.

  Your ghost image is probably something a bit twisted with your cache. Try to import the project into a new project.

  In CC 2015 (version AE 13.5.x), the preview is not displayed during a rendering. In my view, that this feature is back in the update of the following month. See what Adobe post about things not yet present in the new architecture of CC 2015 http://adobe.ly/1cXyVHV

  If you are having too many problems with CC 2015, could install CC 2014 next to her and to use that to update the following month. http://blogs.adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015 /

• In a replay of his questions and...

  Here is the code for a simple game that has music that starts as soon as the game scene is reached... third stage. There are 4 buttons related to music, volume up, lower the volume, stop music and play music.

  As I said, the music plays automatically at the beginning of the game, I want. The top to the bottom and stop the volume work. The problems are.

  First of all, if you stop the music the play button does not start the music again.

  Second, none of the sound buttons work on a replay.

  Would it be useful to have a link to the game? I'll load and put a link in a few minutes.

  I'm stuck. I'm new to actionScript. I take a class and this is my last. I look forward to the day when Action

  I appreciate your help!

  Thank you

  Michelle

  var bool:Boolean

  var score: number = 0;

  
  var flag: Number = 1;

  
  var myTimer:Timer = new Timer (1000);

  
  var soundReq:URLRequest = new URLRequest ("music.mp3");

  
  var sound: Sound = new Sound();

  
  var soundControl:SoundChannel = new SoundChannel();

  
  var volumeControl:SoundTransform = new SoundTransform();

  
  var flag2:Number = 1;

  
  count_txt. Text = "0";

  
  myTimer.addEventListener ("timer", timedFunction);

  
  insect_btn. Visible = false;

  
  timer_txt. Text = "20";

  function disappear(e:MouseEvent):void
  {

  If (timer_txt.text is "0")
  {
  launch_btn. RemoveEventListener (MouseEvent.CLICK, target);
  insect_btn. RemoveEventListener (MouseEvent.Click, disappear);
  }
  on the other
  {
  insect_btn. Visible = false;
  count_txt. Text = String(++score);
  }
  }

  
  function target(e:MouseEvent):void
  {
  if(flag==1)
  {
  myTimer.start ();
  flag = 0;
  }
  insect_btn.x = Math.random () * 625;
  insect_btn.y = Math.random () * 475;
  insect_btn. Visible = true;
  }

  
  function timedFunction(e:TimerEvent)
  {
  var tc: int = 20 - myTimer.currentCount;
  timer_txt. Text = tc.toString ();
  If (myTimer.currentCount > 19)
  {
  insect_btn. RemoveEventListener (MouseEvent.Click, disappear);
  launch_btn. RemoveEventListener (MouseEvent.CLICK, target);
  MyEventArgs;
  gotoAndPlay ("done_frame");
  }
  }

  
  function playAgain(evt:MouseEvent):void
  {
  gotoAndPlay ("play_frame");
  }

  {if(!bool)}
  bool = true;
  Sound.load() (soundReq);
  soundControl = sound.play().
  }

  function playSound(event:MouseEvent):void
  {
  If (Flag2 == 0)
  {
  soundControl = sound.play().
  Flag2 = 1;
  }

  }

  
  function stopSound(event:MouseEvent):void
  {
  soundControl.stop ();
  flag = 0;
  }

  
  function increaseVolume(event:MouseEvent):void
  {
  volumeControl.volume +=. 5;
  soundControl.soundTransform = volumeControl;
  }

  
  function decreaseVolume(event:MouseEvent):void
  {
  volumeControl.volume-=. 5;
  If (volumeControl.volume > = 0)
  soundControl.soundTransform = volumeControl;
  on the other
  volumeControl.volume = 0;

  }

  insect_btn.addEventListener (MouseEvent.Click, disappear);
  launch_btn.addEventListener (MouseEvent.CLICK, target);

  
  btn_play.addEventListener (MouseEvent.CLICK, playSound);
  btn_stop.addEventListener (MouseEvent.CLICK, stopSound);

  
  btn_up.addEventListener (MouseEvent.CLICK, increaseVolume);
  btn_down.addEventListener (MouseEvent.CLICK, decreaseVolume);

  There may not be anything wrong with this code.  but there are times when you use e.target, it's not what you want.  almost always, you must use e.currentTarget.

  in any case, this error message is not because of any code of handleClick3().  You can click on publish the files, settings, flash, permit debugging to see numbers of frame and the line of code that causes your invalid sound.  This will allow you to focus on the problematic code.

• Photosmart 7280 - work with a mac and PC

  We have Photosmart 7280 home for use with a PC (mine) and a Mac (my partner).

  My partner was never able to operate wireless with his mac and did not have time to sit on the phone or online to make it work.  However, I installed it yesterday and got, it works on my PC (Dell Latitude C7280) with Vista Business wireless.  Everything was fine, until my partner needed to analyze something yesterday.  He plugged the USB as usual and scanned away successfully.  However, when I got then use again, the solution Center shows the printer as being disconnected.    I removed the usb cable, the printer stopped on and once again but nothing works.

  I rang the helpline yesterday and was in a queue for 1 hour 4 minutes before I finally gave up.

  How can I get the printer reconnected and how do I stop this happening again?

  Lucy

  PS - Note to HP - keep customers in a queue of 1 h 04 min with a message saying "we will soon connect you" is atrocious customer service.

  Is the printer lost connectivity with your wireless-network address of the printer's IP has changed since you installed the SW on your Dell.

  You use a wireless router - and what is it?

  Can you access the printer's internal web page by accessing its IP address? You can find the IP address of the printer by printing the Network Configuration Page.

  If you can access the web page of the printer, then unfortunately I think it's time to reinstall the SW. Once get you it working again, I would recommend setting the printer's IP address. On the C7280, you can do it from the front panel of the printer in the network menu.

  BTW - what type of problem do you have to get the SW installed on the Mac?

• Pavilion Dv6 - startup with beep continuous and wouldn't start without the CD inside windows

  Hi, so I was using my laptop one day, perfectly fine and I got sick, so I had it turned off for about 2 or 3 days. When I turned it back on it started constantly beep (1 beep long, but 1 beep followed by another instantly.

  Now I tried to reinstall Windows 7 and did, but she continued with the same problem. So I did a format on my drive, and did install a clean windows 7, it completed the installation currently and reset to move to the next step (now it does not start back to the desktop to completely finish doesn't stop beeping and freezing)

  I did a hard reboot and that did not work and I cleaned my air, nothing has worked to resolve this issue, and I did nothing in 2 or 3 days, he was off (before that day, I played last, it was working fine, and the day I turned it off everything I've done has been playing World of Warcraft don't not download/install something again)

  I opened the back and checked my memory was sitting on the right, and my HARD drive was inplace correctly (at the beginning when it was happening, it would not be in the office without the Windows 7 CD inside, now after I did a clean install, he's not going to the office without worrying)

  I read another post with similar problems and plan to go out 1 of my RAM sticks and just try to run with 1 in, and switching them and try to see if that helps, but I'll do that tomorrow as I worked on this thing for hours tonight, I've been on the Windows 7 forum get advice from someone here, but he gave a link to read and agreed I should post here also.

  My suspisions that if none of this works, it's my Proccessor, my Ram or my entire CPU, which in this case, I know not what to do to do or if it is worth fixing (Ram is easy, but the other two seems difficult and costly) for any help or advice as I can get from you guys would be greatly appreciated it's a HP Pavilion dv6 notebook.

  Edit: I managed to enter the office and my clean install of windows 7 in full, and I made a default reset in the BIOS, will return tomorrow with updates I have.

  Yes mate, I waiting since I posted a reply with HP staff.

  They are * beep * ing pathetic and I would never buy a HP anything ever, I will also say to all my friends and tell all my friends to tell their friends and so on and so forth, do not to do. I will also let any forum I post on the same and any game online that I play on the same thing.

  I gave up and will just buy a new DESKTOP PC, they work better and you can actually solve the material problems if it's graphics/CPU things, unlike a laptop.

  If I were to ever get a laptop once again, it will not be a HP, I'd rather have nothing then use a pathetic HP product ever, I would rather die then have to use it. Their technical support is pathetic, and I had nothing else problems with the HP laptop I've had since the beginning.

  Because of their pathetic excuse for a computer/laptop, I am behind in my studies and have perhaps missed a few projects that I'm not able to repeat. Thank you HP, you are now under the dirt for me.

• Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  Despite his uniform and fixed on my form of task settings, I get thickness variable and facing interiors of the curves. I really wish it was just smooth and uniform. Any ideas?

  This question cannot be resolved when you use the brush with an effect.

  It cannot be solved with the form of the task.

  Try just drawing on larger scale, maybe then it won't happen.

• Questions about planning and executing a script and an Agent

  Hello
  
  I created a script and I want to schedule it to run. Is it possible to plan and run with the help of an agent but having no repository?
  
  Thank you
  Randy

  Hi Mary,

  According to our email conversation I post for your thread's detailed response. :)

  Please Don ' t mess up with two types of agent.

  1 Manuel Agent (invoked via commands such as agent.bat and agentscheduler.bat, once the agent/server command closed window will be cancelled)

  2. automatic agent (Agent installed as a Service (Windows only) and can be stareted as a service once the OS launched), its installed via the agentservice.bat command. Please follow the below thread for agentservice,

  Error creating agentscheduler

  Please follow the steps below to schedule a task via agentscheduler manual ie agents,

  1. in the topology, create a physical Agent with the name of the agent, IP address/host name, Port number (by default is20910). TEST of POSITIONING WHICH button at this point.

  2. create a logical agent for physical agent (in the logical Architecture)

  3. change your ODIPARAMS. BAT/SH with your repository connection information,

  Set ODI_SECU_DRIVER = org.hsqldb.jdbcDriver
  Set ODI_SECU_URL = jdbc:hsqldb:hsql://localhost
  Set ODI_SECU_USER = his
  Set ODI_SECU_ENCODED_PASS =
  Set ODI_SECU_WORK_REP = WORKREP
  Set ODI_USER = SUPERVISOR
  Set ODI_ENCODED_PASS = LELKIELGLJMDLKMGHEHJDBGBGFDGGH

  Details:
  ODI_SECU_USER: User of the master repository connection (the user database).
  ODI_SECU_ENCODED_PASS: encrypted password of ODI_SECU_USER
  ODI_SECU_WORK_REP: The name of the repository containing the scripts to run.
  ODI_USER: User connection ODI
  ODI_ENCODED_PASS: encrypted password of ODI_USER
  Note: to ODI_SECU_ENCODED_PASS and ODI_ENCODED_PASS above, the value must be encrypted using the syntax
  agent code
  for example 'agent encode snpm' Note When you copy the encoded string, make sure that the trailing space is not copied.

  4. run the command in the directory "/ bin" of ,.

  agentscheduler '-PORT 20910 = "" "-NAME =".

  5. go to the Manager of topology->-> physical Agent physical Architecture and press the TEST BUTTON now.

  6. go to your scenario, expand it and insert the planning, select the Agent of your logic and plan your work according to your requirement.

  Makes sense?

  Thank you
  G

• Problem with the store and several questions.

  I tried all the methods listed below:

  Method 1: Make sure that User Account Control (UAC) is enabled.

  Press the Windows key and from the splash screen, type "UAC" and on the right, select settings.
  Select change user account control settings and check here.

  Method 2: Check the date & time zone is correct:

  Follow these steps to change the time.

  a. double-click the current time on the lower right of your screen.

  b. then click Change hour date, then click on the button to change time zone

  c. Select your time zone and the tick to automatically adjust clock for the time being, then press OK

  d. press on apply, then OK.

  Method 3: Run the network troubleshooting and check if you can connect to store.

  Follow the steps to run the network troubleshooter utility:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, tap network troubleshooting in the optionSearch .

  d. clickutility troubleshooting networkto run the troubleshooter.

  Method 4: If you use a proxy connection, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on the Tools buttonand then click onInternet Options

  c. click on the Connections taband then clickLAN settings

  d. uncheck it Server Proxy use.

  e. click on apply then Ok to save the changes.

  Now, check if you can access store.

  Method 5: Cache reset Store.
  Follow the steps and check out them.
  (a) right click on the start screen
  (b) click on run
  Type c) in WSReset.exe
  (d) press enter
  (e) restart the computer and check.

  Method 6: analysis Run SFC
  (a) right click on the lower left corner of the screen and select 'Admin command prompt.
  (b) type following command, and then press ENTER: "sfc/scannow".

  Method 7: I suggest that you disable the antivirus installed on the computer.

  Method 8: CDevil Windows Firewall settings

   

  (a) Type in the Panel on the Start Page.

  (b) on the left side, click on Control Panel.

  (c) click on Windows Firewall.

  (d) in the left pane, click "allow an app or feature through Windows Firewall."

  (e) under the features and applications allowed, look for store.

  (f) make sure that you have a click in private or Public.

  (g) then see if you can open the Windows store.

  Not a SINGLE one of these methods have worked. When I go to my home screen and click on store, he told me 'we could not connect to the Bank. This could have happened due to a server problem or a network connection has expired. Please wait a few minutes and try again. "I did it on my network troubleshooting, all right, I am able to connect to everything, but I've NEVER been able to connect to the store. Not only can I not connect to the store to upgrade to 8.1 Windows, but I can't create restore points. Not only that, but the backlight on my keyboard, no matter which option to choose, is always on when I type, even if I say it stays off. In addition, with Windows 8, I was promised the "quick start" where he takes no time to start, it takes more to start my computer windows 8 as it did my 4 years updated to the windows computer 7. Also, I can't start in Safe Mode or the clean boot. Whenever I try to perform the clean boot by using the options in the window manager and the configuration tasks system, when the computer reboots, everyone who opens are reset to zero and it doesn't work. I can also perform an update of the system. I want to just upgrade to 8.1 windows, but I'm not without the WS and NONE of the methods I have found work. I'm about to say the hell with windows 8 and make a downgrade from the system to an OS that actually works. I had nothing else problems since I bought this computer with windows 8. I don't have time to deal with these questions. It is clear that appropriate testing procedures were followed before the release of Windows 8. Please help, I am very frustrated with all of this.

  I also tried before asking this question. I don't know what happened, or how he did it, but the store has started working when I was on other networks, he didn't always works at home well. I finally download and install windows 8.1 and it fixed the issue together.

• Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

  Hello good I would like to cancel the annual plan of adobe audition,

  As I have had problems with the software and the Bank, if I can help with that please.

  Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

  Creative single-app cloud membership for Adobe Audition (one year)

  Subscription Office

  March 11, 2015

  In the case of any questions, please let us know, I can certainly go for you.

  Concerning

  Baudier

• A few questions when planning for connection cars. (NTP output and connection)

  Good morning
  I have three questions when planning 11.2.0.3 RAC installation on Centos 6.
  
  1. When you configure NTP, the document indicates * "If you use the NTP, you configure it using the x - flag." Can I know how to configure the NTP with flag - x?
  
  2. I intend to use another server (named MY_NTP) that is not in the cluster as the NTP server. All nodes in the cluster will run ntpdate MY_NTP to get time information. This command will be put in a crontab. But I wonder how the YES program know this. I mean when we run YES, it will check the settings of NTP, right? He checks my crontab? Because if they don't, it will not know that I am using the NTP client and may fail the audit.
  
  3. when I got my Centos server connection, it will display information like below

  [root@node1 ~] # su - oracle
  [oracle@node1 ~] $ ssh oracle@node2
  Last login: Thursday, May 23, 10:55:07 2013 of node2
  [oracle@node2 ~] $

  the paper said

  delete all stty commands to hidden (such as log files
  or profile scripts) before starting the installation. On Linux systems,.
  If there are all these files that contain stty commands, then when
  These files are loaded by the remote shell during installation, YES
  indicates an error and stops the installation.

  So I think that I have to delete the out put information

  last login: Thursday, May 23, 10:55:07 2013 of node2

  one could tell me how to do? I even tried to delete the bashrc file. It simply doesn't
  
  Published by: Kramer on 23 May 2013 18:40
  
  Published by: Kramer on 23 May 2013 18:45

  CentOS is not supported by Oracle, but it should work if you follow the installation guide for Red Hat Linux or Oracle's Linux.

  Linux NTP configuration is documented in http://docs.oracle.com/cd/E11882_01/install.112/e22489/prelinux.htm#BABECGII.

  I didn't ' think you should remove the last exit of the connection. You should use instead another ssh command to check the ssh configuration:

  ssh node2 date