Select audio device Realtek as the in / out audio device

Similar Questions

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

  In clear, all the history in detail window Forum selection & search history is disabled and grayed out and I can't select the option.

  You are welcome

• HP 15-g030so: the selected boot device has failed. Press ENTER to continue

  So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to install win 8.1 running from a usb storage device that was the 8.1 software the installer of windows in it. Then the screen went black and I was promtped with "selected boot device failed." Press Enter to continue. "

  Any ideas on how to solve this problem?

  Problemi1 wrote:
  And now we're back to the original problem. I have an official version of windows 8.1 downloaded and formatted to a 8 GB USB by the official program from the official websites of microsoft. And just to clarify, it works with my pc. Now, when I try to start the installation in HP computer, it promots me with "selected boot device failed." Press ENTER to continue"and im the possibility of"boot manager"," Manager "start of the EFI file', who faced the same problem when I try to manually start the device and start"(yep 2 times). "»

  Hello

  Sorry to hear that.

  If you see boot and boot to the EFI file manager but nothing else, the USB is not detected.

  Please, perform the above steps

  s ' ensure that the 8.1 Win USB is intact and working

  -Secure Boot to disable and enable the Legacy mode

  -save changes and continue with the F9 mode.

  

  If it still does not respond, please take screenshots and join them in the next post.

  I hope this helps.

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Error - the specified i/o operation on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period.

  Original title: XP USB device timeout - is there a solution?

  Under all the circumstces I get: "Windows - Device Timeout" The specified IO on Device\Harddisk2\DR4 did not complete before the time-out expired period.  The drive is a Sony external 150 GB USB2.  The only way to remedy this is turned off and let windows re - recognize.  It stops usually after 18minutes regardless of activity. I did all the USB install no etc no difference.  Please advise as soon as POSSIBLE!  Please not flaky ideas or suggestions.  P.S > I looked the FIX for USB, but it is not specific to my question - if I ask this question instead.

  Hello

  ·        What is the brand and the model of your machine?

  ·        What steps you have tried to solve the problem other that Reinstall USB?

  ·        You did it all change hardware or software on your machine before this problem?

  You can contact the manufacturer of your computer to update the chipset drivers and check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

  I downloaded the VM Windows and created a machine. The machine should start with ' Microsoft Corporation PXE Boot Agent v2.00 (built-in BIOS) (C) Copyright 2008 Microsoft Corporation all rights reserved.»

  "CLIENT MAC ADDR: 00 03 FF 8 1 C 2 C GUID: 2FA ' and more digits"DHCP. "... "with a spinny beside the points thing. After awhile, the... won't have a message "no boot file received" or "any offer DHCP or proxyDHCP was received" with a "reboot and device or insert boot media select start suitable for the selected boot device". What should I do? It also appears on other virtual machines. I tried pressing tools and clicking on install the built-in components, but nothing happens!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Laptop suddenly loses the wireless out of sleep mode

  I have a HP Pavilion g7 laptop running Windows 7 Home Premium 64-bit.

  Last month, it was the loss of connection Wi - Fi & will not return to the top of the standby mode. When I open the screen, the "enlightened" shows power button but the screen remains black and wireless orange shows (f12) instead of the blue button. I can hard down and restart in safe mode to get the screen to the top. So, I have to restart the computer several times to get the wireless to turn back. By pressing the f12 key has nothing to do with it. I have a HP desktop which is perfectly fine - no problems at all.

  Nothing has changed regarding the new routers, software or anything like that.

  Welcome to the forum, TM_Cali,

  Consider / try the following:

  WiFi disconnects after sleep - Wifi doesn't wake up

  IF you use no SHARING, try:

  Windows key + X > P (opens the control panel) > icons > network and sharing Center >

  Change the adapter settings > right click on your connection > properties >

  Scroll down in the Networking tab > uncheck the IPv6 BOX > OK

  OR - a better solution:
  

  Windows 8:

  Windows key + X > M (opens Device Manager) >

  Windows 7:

  Control Panel > display icon value > Device Manager >

  Next...

  Network adapters >

  Right-click your wireless adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  CHECK 'Allow this device out computer' >

  Ok

  Bluetooth:
  

  Windows key + X > M (opens Device Manager) > Bluetooth >

  Right click of your Bluetooth adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  Ok

  ======================================================================================
  

  For laptops:

  Pay attention to the warning to leave the device connected wireless and battery operated.  The device consumes little power; However, if you run your battery is very low, it could have an impact.

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

  win xp install

  Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

  Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty